ignitevisorcmd.sh does not connect to grid

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

ignitevisorcmd.sh does not connect to grid

ali hassan
Hi,
I failed to connect ignitevisorcmd.sh to my grid. The result of open is:

+-------------------------------------+

| Status               | Disconnected |

| Ignite instance name | <n/a>        |

| Config path          | <n/a>        |

| Uptime               | <n/a>        |

+-------------------------------------+

visor>



even if I choose the right conf, and I repeat open many times.



The grid is running, and I can perform queries normally.

There is no exception, nor indication in the logs.

I used –v in both ignite.sh and ignitevisorcmd.sh.



I appreciate your help.



Best Regards,

Ali Hassan

Senior Scala SE

Senior BigData SE
Reply | Threaded
Open this post in threaded view
|

Re: ignitevisorcmd.sh does not connect to grid

Nikolay Izhikov-2
Hello, Ali.

Looks like this is known issue and it was fixed by [1]

Nikolay, can you confirm it?

[1] https://github.com/apache/ignite/commit/d0bae90bce33dbed8b9f3cd52663ce5efa545d97

> 28 марта 2020 г., в 12:30, ali hassan <[hidden email]> написал(а):
>
> Hi,
> I failed to connect ignitevisorcmd.sh to my grid. The result of open is:
>
> +-------------------------------------+
>
> | Status               | Disconnected |
>
> | Ignite instance name | <n/a>        |
>
> | Config path          | <n/a>        |
>
> | Uptime               | <n/a>        |
>
> +-------------------------------------+
>
> visor>
>
>
>
> even if I choose the right conf, and I repeat open many times.
>
>
>
> The grid is running, and I can perform queries normally.
>
> There is no exception, nor indication in the logs.
>
> I used –v in both ignite.sh and ignitevisorcmd.sh.
>
>
>
> I appreciate your help.
>
>
>
> Best Regards,
>
> Ali Hassan
>
> Senior Scala SE
>
> Senior BigData SE

Reply | Threaded
Open this post in threaded view
|

Re: ignitevisorcmd.sh does not connect to grid

Nikolai Kulagin
Ali, yes, this problem has been fixed.

пн, 30 мар. 2020 г. в 11:44, Nikolay Izhikov <[hidden email]>:

> Hello, Ali.
>
> Looks like this is known issue and it was fixed by [1]
>
> Nikolay, can you confirm it?
>
> [1]
> https://github.com/apache/ignite/commit/d0bae90bce33dbed8b9f3cd52663ce5efa545d97
>
> > 28 марта 2020 г., в 12:30, ali hassan <[hidden email]> написал(а):
> >
> > Hi,
> > I failed to connect ignitevisorcmd.sh to my grid. The result of open is:
> >
> > +-------------------------------------+
> >
> > | Status               | Disconnected |
> >
> > | Ignite instance name | <n/a>        |
> >
> > | Config path          | <n/a>        |
> >
> > | Uptime               | <n/a>        |
> >
> > +-------------------------------------+
> >
> > visor>
> >
> >
> >
> > even if I choose the right conf, and I repeat open many times.
> >
> >
> >
> > The grid is running, and I can perform queries normally.
> >
> > There is no exception, nor indication in the logs.
> >
> > I used –v in both ignite.sh and ignitevisorcmd.sh.
> >
> >
> >
> > I appreciate your help.
> >
> >
> >
> > Best Regards,
> >
> > Ali Hassan
> >
> > Senior Scala SE
> >
> > Senior BigData SE
>
>
Reply | Threaded
Open this post in threaded view
|

Re: ignitevisorcmd.sh does not connect to grid

Nikolay Izhikov-2
Hello, Ali.

This fix would be available in 2.8.1.

> 30 марта 2020 г., в 21:09, Nikolai Kulagin <[hidden email]> написал(а):
>
> Ali, yes, this problem has been fixed.
>
> пн, 30 мар. 2020 г. в 11:44, Nikolay Izhikov <[hidden email]>:
>
>> Hello, Ali.
>>
>> Looks like this is known issue and it was fixed by [1]
>>
>> Nikolay, can you confirm it?
>>
>> [1]
>> https://github.com/apache/ignite/commit/d0bae90bce33dbed8b9f3cd52663ce5efa545d97
>>
>>> 28 марта 2020 г., в 12:30, ali hassan <[hidden email]> написал(а):
>>>
>>> Hi,
>>> I failed to connect ignitevisorcmd.sh to my grid. The result of open is:
>>>
>>> +-------------------------------------+
>>>
>>> | Status               | Disconnected |
>>>
>>> | Ignite instance name | <n/a>        |
>>>
>>> | Config path          | <n/a>        |
>>>
>>> | Uptime               | <n/a>        |
>>>
>>> +-------------------------------------+
>>>
>>> visor>
>>>
>>>
>>>
>>> even if I choose the right conf, and I repeat open many times.
>>>
>>>
>>>
>>> The grid is running, and I can perform queries normally.
>>>
>>> There is no exception, nor indication in the logs.
>>>
>>> I used –v in both ignite.sh and ignitevisorcmd.sh.
>>>
>>>
>>>
>>> I appreciate your help.
>>>
>>>
>>>
>>> Best Regards,
>>>
>>> Ali Hassan
>>>
>>> Senior Scala SE
>>>
>>> Senior BigData SE
>>
>>