[DISCUSSION] Ignite.C++ and CMake

[Ivan Daschinsky]

Ok, CMake now is the only option to build C++ on non-windows platforms.
Autotools is removed from master.

Many thanks to Igor Sapego, Zhenya Stanilovsky, Nickolay Izhikov and Ilya
Kasnacheev for review, testing and suggestions.

вт, 23 июн. 2020 г. в 18:42, Ivan Daschinsky <[hidden email]>:

> I suppose, that removal of autotools from source code is a question of a
> week. There is no need to support it.
>
> вт, 23 июн. 2020 г., 18:38 Ilya Kasnacheev <[hidden email]>:
>
>> Hello!
>>
>> Once you do that, I think it would make sense to remove autotools
>> invocation from artifact build process. In the future we may choose to
>> remove autotools support entirely.
>>
>> Regards,
>> --
>> Ilya Kasnacheev
>>
>>
>> вт, 23 июн. 2020 г. в 18:00, Petr Ivanov <[hidden email]>:
>>
>> > That host was down for some time and got up only recently.
>> > Installed cmake there also.
>> >
>> >
>> >
>> > > On 23 Jun 2020, at 17:39, Ivan Daschinsky <[hidden email]>
>> wrote:
>> > >
>> > > Petr, I see, that cmake is missing on aitc10_05 but it is in pool and
>> > > trying to run build.
>> > >
>> > > [1] --
>> > >
>> >
>> https://ci.ignite.apache.org/buildConfiguration/IgniteTests24Java8_PlatformCPPCMakeLinux/5412025
>> > >
>> > > вт, 23 июн. 2020 г. в 17:33, Ivan Daschinsky <[hidden email]>:
>> > >
>> > >>>> For the sake of discretion, I'd purpose to remove old suites from
>> Run
>> > >> All and archive or pause them for some time before removal.
>> > >> Agree, I was talking about removal from RunAll chain, complete
>> removal
>> > is
>> > >> not necessary.
>> > >> But after private discussion with Igor Sapego, me and he decided to
>> wait
>> > >> for a week before exclusion of these suites from RunAll.
>> > >>
>> > >> вт, 23 июн. 2020 г. в 17:21, Petr Ivanov <[hidden email]>:
>> > >>
>> > >>> For the sake of discretion, I'd purpose to remove old suites from
>> Run
>> > All
>> > >>> and archive or pause them for some time before removal.
>> > >>>
>> > >>>
>> > >>>> On 23 Jun 2020, at 13:26, Nikolay Izhikov <[hidden email]>
>> > wrote:
>> > >>>>
>> > >>>>> So, folks, is it ok to remove old suites from build chain
>> > >>>>
>> > >>>> +1 from me.
>> > >>>>
>> > >>>>
>> > >>>>> 23 июня 2020 г., в 13:15, Ivan Daschinsky <[hidden email]>
>> > >>> написал(а):
>> > >>>>>
>> > >>>>> Well, new suites added to RunAll and all seems to be ok.
>> > >>>>>
>> > >>>>> I think it is time to remove old suites.
>> > >>>>> WDYT?
>> > >>>>>
>> > >>>>> Also, I created patch with removal of autotools, but old suites
>> > should
>> > >>> be
>> > >>>>> removed first.
>> > >>>>>
>> > >>>>> So, folks, is it ok to remove old suites from build chain?
>> > >>>>>
>> > >>>>> вт, 23 июн. 2020 г. в 10:36, Ivan Daschinsky <[hidden email]
>> >:
>> > >>>>>
>> > >>>>>> Ok, I changed agents requirements to builds and add them to
>> runAll
>> > >>>>>>
>> > >>>>>> пн, 22 июн. 2020 г. в 22:39, Petr Ivanov <[hidden email]>:
>> > >>>>>>
>> > >>>>>>> Cmake is installed on all agents (except 10 which is currently
>> down
>> > >>> and
>> > >>>>>>> will be updated later).
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>>> On 22 Jun 2020, at 21:03, Ivan Daschinsky <[hidden email]
>> >
>> > >>> wrote:
>> > >>>>>>>>
>> > >>>>>>>> Well, patch is merged. Thank a lot to Igor Sapego for review.
>> > >>>>>>>>
>> > >>>>>>>> Peter, well, cmake now can be installed on all agent.
>> > >>>>>>>>
>> > >>>>>>>> I think it's time to add cmake suites to runAll and exclude old
>> > >>> suites
>> > >>>>>>> from
>> > >>>>>>>> it.
>> > >>>>>>>>
>> > >>>>>>>> Patch with removing autotools I Will submit in few days.
>> > >>>>>>>>
>> > >>>>>>>> пн, 22 июн. 2020 г., 20:25 Ivan Daschinsky <
>> [hidden email]>:
>> > >>>>>>>>
>> > >>>>>>>>> Hi folks!
>> > >>>>>>>>>
>> > >>>>>>>>> Good news -- I successfully created 2 CMake suites [1] [2] and
>> > they
>> > >>>>>>> works
>> > >>>>>>>>> as a charm.
>> > >>>>>>>>> Many thanks to Ilya Kasnacheev for giving me permissions and
>> to
>> > >>> Peter
>> > >>>>>>>>> Ivanov for installing cmake and giving a whole agent for
>> testing.
>> > >>>>>>>>>
>> > >>>>>>>>> [1] --
>> > >>>>>>>>>
>> > >>>>>>>
>> > >>>
>> >
>> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinuxClang&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
>> > >>>>>>>>> [2] --
>> > >>>>>>>>>
>> > >>>>>>>
>> > >>>
>> >
>> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinux&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
>> > >>>>>>>>>
>> > >>>>>>>>> пн, 22 июн. 2020 г. в 12:03, Ilya Kasnacheev <
>> > >>>>>>> [hidden email]>:
>> > >>>>>>>>>
>> > >>>>>>>>>> Hello!
>> > >>>>>>>>>>
>> > >>>>>>>>>> I think you should contact Peter Ivanov if you want anything
>> to
>> > be
>> > >>>>>>>>>> installed on agents.
>> > >>>>>>>>>>
>> > >>>>>>>>>> Regards,
>> > >>>>>>>>>> --
>> > >>>>>>>>>> Ilya Kasnacheev
>> > >>>>>>>>>>
>> > >>>>>>>>>>
>> > >>>>>>>>>> пн, 22 июн. 2020 г. в 12:00, Ivan Daschinsky <
>> > [hidden email]
>> > >>>> :
>> > >>>>>>>>>>
>> > >>>>>>>>>>> Actually, I'm going to create 2 new suites based on existing
>> > >>> ones:
>> > >>>>>>>>>>> 1. Platform C++ CMake (Linux)
>> > >>>>>>>>>>> 2. Platform C++ CMake (Linux Clang)
>> > >>>>>>>>>>>
>> > >>>>>>>>>>> Ilya, thank you very much. But, despite the fact, that I
>> have
>> > >>>>>>>>>> permissions,
>> > >>>>>>>>>>> it seems that it's impossible to install something (namely,
>> > >>> CMake) on
>> > >>>>>>>>>>> agents.
>> > >>>>>>>>>>> How can I do this obviously essential task?
>> > >>>>>>>>>>>
>> > >>>>>>>>>>> пн, 22 июн. 2020 г. в 11:30, Ilya Kasnacheev <
>> > >>>>>>> [hidden email]
>> > >>>>>>>>>>> :
>> > >>>>>>>>>>>
>> > >>>>>>>>>>>> Hello!
>> > >>>>>>>>>>>>
>> > >>>>>>>>>>>> I have assigned roles on TC, you can now work on these
>> builds.
>> > >>>>>>>>>>>>
>> > >>>>>>>>>>>> Please describe your changes on development list so that
>> > people
>> > >>>>>>>>>>> understand
>> > >>>>>>>>>>>> what is going on.
>> > >>>>>>>>>>>>
>> > >>>>>>>>>>>> Regards,
>> > >>>>>>>>>>>> --
>> > >>>>>>>>>>>> Ilya Kasnacheev
>> > >>>>>>>>>>>>
>> > >>>>>>>>>>>>
>> > >>>>>>>>>>>> вс, 21 июн. 2020 г. в 17:35, Ivan Daschinsky <
>> > >>> [hidden email]>:
>> > >>>>>>>>>>>>
>> > >>>>>>>>>>>>> Hi folks.
>> > >>>>>>>>>>>>>
>> > >>>>>>>>>>>>> Patch is rigorously tested and with Igor Sapego help it is
>> > >>> possible
>> > >>>>>>>>>> to
>> > >>>>>>>>>>>>> build with cmake Ignite.C++  even on windows.
>> > >>>>>>>>>>>>> But, it's required to make some TC suites and tune them,
>> in
>> > >>> order
>> > >>>>>>> to
>> > >>>>>>>>>>>> patch
>> > >>>>>>>>>>>>> be merged.
>> > >>>>>>>>>>>>> Unfortunately, I am not a commiter and I doesn't have
>> rights
>> > to
>> > >>>>>>>>>> create
>> > >>>>>>>>>>>>> suites. Also, AFAIK, Igor currently is quite busy and
>> doesn't
>> > >>> have
>> > >>>>>>>>>> much
>> > >>>>>>>>>>>>> time to do this task by himself.
>> > >>>>>>>>>>>>> So I need some help from community. Is it possible to
>> grant
>> > me
>> > >>> some
>> > >>>>>>>>>>>> rights
>> > >>>>>>>>>>>>> to TC agents?
>> > >>>>>>>>>>>>>
>> > >>>>>>>>>>>>> ср, 3 июн. 2020 г. в 18:03, Nikolay Izhikov <
>> > >>> [hidden email]>:
>> > >>>>>>>>>>>>>
>> > >>>>>>>>>>>>>> Hello.
>> > >>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>> I will do review of this changes.
>> > >>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>> 1 июня 2020 г., в 13:21, Ivan Daschinsky <
>> > >>> [hidden email]>
>> > >>>>>>>>>>>>>> написал(а):
>> > >>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>> Igor, could you please check my PR?
>> > >>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:28, Ivan Daschinsky <
>> > >>>>>>>>>> [hidden email]>:
>> > >>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>> Thanks you all. Run patch (I've changed some code
>> also) on
>> > >>> TC
>> > >>>>>>>>>> --
>> > >>>>>>>>>>> all
>> > >>>>>>>>>>>>> CPP
>> > >>>>>>>>>>>>>>>> suites are green (GCC, CLang, Win64)
>> > >>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:02, Zhenya Stanilovsky
>> > >>>>>>>>>>>>>> <[hidden email]
>> > >>>>>>>>>>>>>>>>> :
>> > >>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>> Ivan besides documentation [1]
>> > >>>>>>>>>>>>>>>>> -s no —  no works
>> > >>>>>>>>>>>>>>>>> -- catch_system_errors =no — works properly well,
>> tests
>> > are
>> > >>>>>>>>>>> passed.
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>> boost 1.65
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>> [1]
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>
>> > >>>>>>>>>>>>
>> > >>>>>>>>>>>
>> > >>>>>>>>>>
>> > >>>>>>>
>> > >>>
>> >
>> https://www.boost.org/doc/libs/1_65_0/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/catch_system.html
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>> Hello!
>> > >>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>> I didn't check tests since I don't develop AI C++,
>> > merely
>> > >>>>>>>>>> use it
>> > >>>>>>>>>>>> as
>> > >>>>>>>>>>>>>> user.
>> > >>>>>>>>>>>>>>>>>> That's where we should wait for Igor Sapego to check.
>> > >>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>> Regards,
>> > >>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>> Ilya Kasnacheev
>> > >>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 12:20, Ivan Daschinsky <
>> > >>>>>>>>>>> [hidden email]
>> > >>>>>>>>>>>>>> :
>> > >>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>> Ilya, thanks a lot! What about tests? I found one
>> flag
>> > >>> that
>> > >>>>>>>>>>> must
>> > >>>>>>>>>>>> be
>> > >>>>>>>>>>>>>>>>>>> supplied to boost.tests.
>> > >>>>>>>>>>>>>>>>>>> This flag should fix JVM crash of C++ suites on
>> Linux.
>> > >>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>> Zhenya Stanilovsky and me have checked, that without
>> > this
>> > >>>>>>>>>> flag
>> > >>>>>>>>>>>>> tests
>> > >>>>>>>>>>>>>>>>> failed
>> > >>>>>>>>>>>>>>>>>>> with SIGSEGV early (boost catch this signal from
>> jvm,
>> > but
>> > >>>>>>>>>> it is
>> > >>>>>>>>>>>> ok
>> > >>>>>>>>>>>>>> for
>> > >>>>>>>>>>>>>>>>>>> jvm).
>> > >>>>>>>>>>>>>>>>>>> Flag is -catch_system_errors=no. I added it to CTest
>> > >>> runner.
>> > >>>>>>>>>>> You
>> > >>>>>>>>>>>>> can
>> > >>>>>>>>>>>>>>>>>>> invoke it manually and using make test ARGS="-V"
>> > >>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 11:54, Ilya Kasnacheev <
>> > >>>>>>>>>>>>>>>>> [hidden email] >:
>> > >>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>> Hello!
>> > >>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>> Looks good to me! But we probably also ask Igor to
>> > take
>> > >>> a
>> > >>>>>>>>>>> look.
>> > >>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>> Compiled debug and release, without and with odbc,
>> > >>> checked
>> > >>>>>>>>>>>> running
>> > >>>>>>>>>>>>>>>>> thick
>> > >>>>>>>>>>>>>>>>>>>> node and ODBC connection on Linux.
>> > >>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>> Regards,
>> > >>>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
>> > >>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>> чт, 28 мая 2020 г. в 17:31, Ivan Daschinsky <
>> > >>>>>>>>>>>> [hidden email]
>> > >>>>>>>>>>>>>>> :
>> > >>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>> Ok, PR is ready
>> > >>>>>>>>>>>>>>>>>>>>>
>> https://issues.apache.org/jira/browse/IGNITE-13078
>> > >>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>> Build tested on Mac OS X 10.15 and Ubuntu 20.04
>> with
>> > >>> CMake
>> > >>>>>>>>>>>> 3.17.2
>> > >>>>>>>>>>>>>>>>> and
>> > >>>>>>>>>>>>>>>>>>>> 3.6.1
>> > >>>>>>>>>>>>>>>>>>>>> Unfortunately, I was not able to test on Windows,
>> but
>> > >>>>>>>>>>>> principally
>> > >>>>>>>>>>>>>>>>> it
>> > >>>>>>>>>>>>>>>>>>>> should
>> > >>>>>>>>>>>>>>>>>>>>> works, but minor issues are probable.
>> > >>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>> Instruction is attached in PR.
>> > >>>>>>>>>>>>>>>>>>>>> Any use reports are welcomed!
>> > >>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:51, Ivan Daschinsky <
>> > >>>>>>>>>>>>> [hidden email]
>> > >>>>>>>>>>>>>>>>>> :
>> > >>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>> Stephen, looks great! I do mostly the same
>> things in
>> > >>> C++
>> > >>>>>>>>>>> code.
>> > >>>>>>>>>>>>>>>>> Thank
>> > >>>>>>>>>>>>>>>>>>>> you!
>> > >>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:33, Stephen Darlington <
>> > >>>>>>>>>>>>>>>>>>>>>> [hidden email] >:
>> > >>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>> Not sure if it’ll help, but I made some changes
>> to
>> > >>> get
>> > >>>>>>>>>> it
>> > >>>>>>>>>>>>>>>>> working
>> > >>>>>>>>>>>>>>>>>>> on a
>> > >>>>>>>>>>>>>>>>>>>>>>> Mac with the current built system. There may be
>> > some
>> > >>>>>>>>>> code
>> > >>>>>>>>>>>> worth
>> > >>>>>>>>>>>>>>>>>>>> taking.
>> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>> https://github.com/apache/ignite/pull/4872 <
>> > >>>>>>>>>>>>>>>>>>>>>>> https://github.com/apache/ignite/pull/4872 >
>> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>> Regards,
>> > >>>>>>>>>>>>>>>>>>>>>>> Stephen
>> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>> On 26 May 2020, at 16:02, Ivan Daschinsky <
>> > >>>>>>>>>>>>>>>>> [hidden email] >
>> > >>>>>>>>>>>>>>>>>>>>> wrote:
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>> I appreciate any help, thank you, Ilya.
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>> Currently I have a small PR without ticket
>> (link
>> > in
>> > >>>>>>>>>> first
>> > >>>>>>>>>>>>>>>>>>> post),but
>> > >>>>>>>>>>>>>>>>>>>> I
>> > >>>>>>>>>>>>>>>>>>>>>>>> decided not to file a jira issue before
>> > discussion.
>> > >>>>>>>>>>>>>>>>>>>>>>>> Now I see, that this feature are of great
>> interest
>> > >>> to
>> > >>>>>>>>>>>>>>>>> community.
>> > >>>>>>>>>>>>>>>>>>> So
>> > >>>>>>>>>>>>>>>>>>>> I
>> > >>>>>>>>>>>>>>>>>>>>>>> file
>> > >>>>>>>>>>>>>>>>>>>>>>>> a ticket, test myself on my home laptop (ubuntu
>> > >>> 20.04)
>> > >>>>>>>>>>>>>>>>>>>>>>>> and add detailed instructions to DEVNOTES.txt
>> in a
>> > >>> few
>> > >>>>>>>>>>> days.
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>> I would be happy if my someone can follow the
>> > >>>>>>>>>> instruction
>> > >>>>>>>>>>>> and
>> > >>>>>>>>>>>>>>>>>>> write
>> > >>>>>>>>>>>>>>>>>>>>>>>> possible issues.
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>> I will notify about status update in this
>> thread
>> > in
>> > >>>>>>>>>> next
>> > >>>>>>>>>>> few
>> > >>>>>>>>>>>>>>>>> days.
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>> Thank you all very much for support!
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 17:50, Ilya Kasnacheev <
>> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
>> > >>>>>>>>>>>>>>>>>>>>>>>> :
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>> Hello!
>> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>> I will assist with checking on Linux if you
>> would
>> > >>>>>>>>>>>> contribute
>> > >>>>>>>>>>>>>>>>> a
>> > >>>>>>>>>>>>>>>>>>>> patch.
>> > >>>>>>>>>>>>>>>>>>>>>>>>> Please start with a ticket (or even an IEP
>> > maybe?)
>> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>> Regards,
>> > >>>>>>>>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
>> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:47, Ivan Daschinsky <
>> > >>>>>>>>>>>>>>>>> [hidden email]
>> > >>>>>>>>>>>>>>>>>>>> :
>> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> Guys, I will certainly thoroughly test my fix
>> > not
>> > >>>>>>>>>> only
>> > >>>>>>>>>>>>>>>>> unices,
>> > >>>>>>>>>>>>>>>>>>> but
>> > >>>>>>>>>>>>>>>>>>>>> on
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> windows too.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> And I will describe it very thoroughly.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> When I was C++ developer (more than 10 years
>> > >>> ago), I
>> > >>>>>>>>>>> have
>> > >>>>>>>>>>>>>>>>> not
>> > >>>>>>>>>>>>>>>>>>> any
>> > >>>>>>>>>>>>>>>>>>>>>>> trouble
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> at all with CMake and Visual Studio 2005.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> Everything works and works good. Moreover,
>> you
>> > can
>> > >>>>>>>>>> build
>> > >>>>>>>>>>>>>>>>> with
>> > >>>>>>>>>>>>>>>>>>>> NMake,
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> msbuild and generate solutions for
>> development.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> I suppose, for CI purposes, using NMake is a
>> way
>> > >>>>>>>>>> better,
>> > >>>>>>>>>>>>>>>>> than
>> > >>>>>>>>>>>>>>>>>>> use
>> > >>>>>>>>>>>>>>>>>>>> vs
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> solutions.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:42, Nikolay Izhikov <
>> > >>>>>>>>>>>>>>>>>>> [hidden email]
>> > >>>>>>>>>>>>>>>>>>>>> :
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, Igor.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Nikolay, removing support for a certain
>> build
>> > >>>>>>>>>> system
>> > >>>>>>>>>>> is
>> > >>>>>>>>>>>> a
>> > >>>>>>>>>>>>>>>>>>>> breaking
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> change.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> No, it’s not.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Why do you think so?
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Development environment and build system is
>> a
>> > >>>>>>>>>> subject
>> > >>>>>>>>>>> to
>> > >>>>>>>>>>>>>>>>> change
>> > >>>>>>>>>>>>>>>>>>>> in
>> > >>>>>>>>>>>>>>>>>>>>>>> any
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> project.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> We can drop or add support of any build
>> system
>> > >>> any
>> > >>>>>>>>>> time
>> > >>>>>>>>>>>> we
>> > >>>>>>>>>>>>>>>>>>> want.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 26 мая 2020 г., в 16:35, Ilya Kasnacheev <
>> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> написал(а):
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello!
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't see why we can't get rid of
>> autotools
>> > >>> in a
>> > >>>>>>>>>>> minor
>> > >>>>>>>>>>>>>>>>>>>> release,
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> provided
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> that cmake actually works. Removing native
>> VS
>> > >>>>>>>>>> support
>> > >>>>>>>>>>>> may
>> > >>>>>>>>>>>>>>>>> be a
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> different
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> thing.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Build system and precise set of
>> dependencies
>> > is
>> > >>>>>>>>>> not a
>> > >>>>>>>>>>>>>>>>> part of
>> > >>>>>>>>>>>>>>>>>>>>> public
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> API
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> in
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> my opinion.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:02, Igor Sapego <
>> > >>>>>>>>>>>>>>>>> [hidden email] >:
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great!
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Let's start with creating a TC suite for
>> it.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The only concern I have is that it is one
>> > more
>> > >>>>>>>>>> build
>> > >>>>>>>>>>>>>>>>> system
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support. Should we get rid of
>> autotools in
>> > >>> 3.0?
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards,
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Igor
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 2:44 PM Alexey
>> > >>> Kukushkin <
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [hidden email] >
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1. I recently completed a cross-IDE (MS
>> > >>> Visual
>> > >>>>>>>>>>>> Studio &
>> > >>>>>>>>>>>>>>>>>>>>> GCC/GDB)
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Ignite
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C++ project and CMake in Ignite C++ would
>> > save
>> > >>>>>>>>>> me a
>> > >>>>>>>>>>>> day
>> > >>>>>>>>>>>>>>>>> of
>> > >>>>>>>>>>>>>>>>>>>>> effort.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 12:09, Pavel
>> Tupitsyn <
>> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
>> > >>>>>>>>>>>>>>>>>>>>>>>> :
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 12:02 PM Zhenya
>> > >>>>>>>>>> Stanilovsky
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < [hidden email] > wrote:
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ivan huge +1 with your proposal.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I had some problems with odbc tests
>> > building
>> > >>>>>>>>>> too,
>> > >>>>>>>>>>>>>>>>> looks
>> > >>>>>>>>>>>>>>>>>>> like
>> > >>>>>>>>>>>>>>>>>>>>>>>>> cmake
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> will
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make it more easy.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Igniters.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d like to discuss porting build
>> process
>> > >>> of
>> > >>>>>>>>>>>>>>>>> Ignite.C++.
>> > >>>>>>>>>>>>>>>>>>> I
>> > >>>>>>>>>>>>>>>>>>>>>>> think
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there is time to change it.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Motivation*
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, it is hard to build
>> > Ignite.C++.
>> > >>>>>>>>>>>> Different
>> > >>>>>>>>>>>>>>>>>>> build
>> > >>>>>>>>>>>>>>>>>>>>>>>>> process
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> windows and linux, lack of building
>> > support
>> > >>> on
>> > >>>>>>>>>> Mac
>> > >>>>>>>>>>>> OS
>> > >>>>>>>>>>>>>>>>> X
>> > >>>>>>>>>>>>>>>>>>>> (quite
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> popular
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> among developers), absolutely not IDE
>> > >>> support,
>> > >>>>>>>>>>>> except
>> > >>>>>>>>>>>>>>>>>>>> windows
>> > >>>>>>>>>>>>>>>>>>>>>>> and
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> only
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio is supported.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Suggestion*
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d suggest to migrate to CMake build
>> > >>> system.
>> > >>>>>>>>>> It
>> > >>>>>>>>>>> is
>> > >>>>>>>>>>>>>>>>> very
>> > >>>>>>>>>>>>>>>>>>>>>>> popular
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> among
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> open source projects, and in Apache
>> > Software
>> > >>>>>>>>>>>>>>>>> Foundation
>> > >>>>>>>>>>>>>>>>>>> too.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> Notable
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user:
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache Mesos, Apache Zookeeper (C
>> client
>> > >>> offers
>> > >>>>>>>>>>>> CMake
>> > >>>>>>>>>>>>>>>>> as
>> > >>>>>>>>>>>>>>>>>>> an
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> alternative
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> autoconf and only option on windows),
>> > Apache
>> > >>>>>>>>>> Kafka
>> > >>>>>>>>>>>>>>>>>>>>> (librdkafka -
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> C/C++
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> client), Apache Thrift. Popular
>> > >>> column-oriented
>> > >>>>>>>>>>>>>>>>> database
>> > >>>>>>>>>>>>>>>>>>>>>>>>> ClickHouse
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uses CMake.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMake is widely supported in many
>> IDE’s
>> > on
>> > >>>>>>>>>>> various
>> > >>>>>>>>>>>>>>>>>>>> platforms,
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> notably
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio, CLion, Xcode, QtCreator,
>> > >>>>>>>>>> KDevelop.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Current status*
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, the most of work is done
>> (see
>> > >>> [1])
>> > >>>>>>>>>> and
>> > >>>>>>>>>>>>>>>>> tested
>> > >>>>>>>>>>>>>>>>>>> on
>> > >>>>>>>>>>>>>>>>>>>>> Mac
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> OS X
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.15 (some C++ porting). All tests are
>> > run
>> > >>>>>>>>>>> without
>> > >>>>>>>>>>>>>>>>> any
>> > >>>>>>>>>>>>>>>>>>>> flaws,
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> odbc (unixodbc), ssl, thin and thick
>> > client,
>> > >>>>>>>>>>>>>>>>> installation,
>> > >>>>>>>>>>>>>>>>>>>> IDE
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> integration
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (CLion). Next steps is to test linux
>> and
>> > >>>>>>>>>> windows.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But full migration isn’t possible
>> without
>> > >>>>>>>>>>> agreement
>> > >>>>>>>>>>>>>>>>> and
>> > >>>>>>>>>>>>>>>>>>>> help
>> > >>>>>>>>>>>>>>>>>>>>> of
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> community. Even if most of all you
>> agree,
>> > >>>>>>>>>>> migration
>> > >>>>>>>>>>>>>>>>>>> requires
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> additional
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> efforts in TC agents tuning and so on
>> > (event
>> > >>>>>>>>>>> though
>> > >>>>>>>>>>>>>>>>> test
>> > >>>>>>>>>>>>>>>>>>>>> running
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> fully
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> automated by CMake CTest).
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lets discuss my proposition and idea.
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] -
>> > >>>>>>>>>>> https://github.com/apache/ignite/pull/7845
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>> --
>> > >>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>>
>> > >>>>>>>>>>>>>
>> > >>>>>>>>>>>>> --
>> > >>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>>>
>> > >>>>>>>>>>>>
>> > >>>>>>>>>>>
>> > >>>>>>>>>>>
>> > >>>>>>>>>>> --
>> > >>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>>>
>> > >>>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>> --
>> > >>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>>>>
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>
>> > >>>>>> --
>> > >>>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>>>
>> > >>>>>
>> > >>>>>
>> > >>>>> --
>> > >>>>> Sincerely yours, Ivan Daschinskiy
>> > >>>>
>> > >>>
>> > >>>
>> > >>
>> > >> --
>> > >> Sincerely yours, Ivan Daschinskiy
>> > >>
>> > >
>> > >
>> > > --
>> > > Sincerely yours, Ivan Daschinskiy
>> >
>> >
>>
>

--
Sincerely yours, Ivan Daschinskiy

[Pavel Tupitsyn]

This is awesome, thanks everyone!

I've tried following the instructions, and the following two steps seem to
be misleading:
* mkdir cmake-build-[release|debug]
* cd ./cmake-build-[release|debug]

When I run cmake in the newly created cmake-build-debug dir, I get:
CMake Error: The source directory
"/home/pavel/w/ignite/modules/platforms/cpp/cmake-build-release" does not
appear to contain CMakeLists.txt.

If I skip those 2 steps, I can build Ignite C++ and run tests with ctest on
Ubuntu 20.04.


Another observation: building the project produces untracked git files.
Should we update gitignore accordingly?


Thanks,
Pavel


On Tue, Jun 30, 2020 at 9:33 PM Ivan Daschinsky <[hidden email]> wrote:

> Ok, CMake now is the only option to build C++ on non-windows platforms.
> Autotools is removed from master.
>
> Many thanks to Igor Sapego, Zhenya Stanilovsky, Nickolay Izhikov and Ilya
> Kasnacheev for review, testing and suggestions.
>
> вт, 23 июн. 2020 г. в 18:42, Ivan Daschinsky <[hidden email]>:
>
> > I suppose, that removal of autotools from source code is a question of a
> > week. There is no need to support it.
> >
> > вт, 23 июн. 2020 г., 18:38 Ilya Kasnacheev <[hidden email]>:
> >
> >> Hello!
> >>
> >> Once you do that, I think it would make sense to remove autotools
> >> invocation from artifact build process. In the future we may choose to
> >> remove autotools support entirely.
> >>
> >> Regards,
> >> --
> >> Ilya Kasnacheev
> >>
> >>
> >> вт, 23 июн. 2020 г. в 18:00, Petr Ivanov <[hidden email]>:
> >>
> >> > That host was down for some time and got up only recently.
> >> > Installed cmake there also.
> >> >
> >> >
> >> >
> >> > > On 23 Jun 2020, at 17:39, Ivan Daschinsky <[hidden email]>
> >> wrote:
> >> > >
> >> > > Petr, I see, that cmake is missing on aitc10_05 but it is in pool
> and
> >> > > trying to run build.
> >> > >
> >> > > [1] --
> >> > >
> >> >
> >>
> https://ci.ignite.apache.org/buildConfiguration/IgniteTests24Java8_PlatformCPPCMakeLinux/5412025
> >> > >
> >> > > вт, 23 июн. 2020 г. в 17:33, Ivan Daschinsky <[hidden email]>:
> >> > >
> >> > >>>> For the sake of discretion, I'd purpose to remove old suites from
> >> Run
> >> > >> All and archive or pause them for some time before removal.
> >> > >> Agree, I was talking about removal from RunAll chain, complete
> >> removal
> >> > is
> >> > >> not necessary.
> >> > >> But after private discussion with Igor Sapego, me and he decided to
> >> wait
> >> > >> for a week before exclusion of these suites from RunAll.
> >> > >>
> >> > >> вт, 23 июн. 2020 г. в 17:21, Petr Ivanov <[hidden email]>:
> >> > >>
> >> > >>> For the sake of discretion, I'd purpose to remove old suites from
> >> Run
> >> > All
> >> > >>> and archive or pause them for some time before removal.
> >> > >>>
> >> > >>>
> >> > >>>> On 23 Jun 2020, at 13:26, Nikolay Izhikov <[hidden email]>
> >> > wrote:
> >> > >>>>
> >> > >>>>> So, folks, is it ok to remove old suites from build chain
> >> > >>>>
> >> > >>>> +1 from me.
> >> > >>>>
> >> > >>>>
> >> > >>>>> 23 июня 2020 г., в 13:15, Ivan Daschinsky <[hidden email]>
> >> > >>> написал(а):
> >> > >>>>>
> >> > >>>>> Well, new suites added to RunAll and all seems to be ok.
> >> > >>>>>
> >> > >>>>> I think it is time to remove old suites.
> >> > >>>>> WDYT?
> >> > >>>>>
> >> > >>>>> Also, I created patch with removal of autotools, but old suites
> >> > should
> >> > >>> be
> >> > >>>>> removed first.
> >> > >>>>>
> >> > >>>>> So, folks, is it ok to remove old suites from build chain?
> >> > >>>>>
> >> > >>>>> вт, 23 июн. 2020 г. в 10:36, Ivan Daschinsky <
> [hidden email]
> >> >:
> >> > >>>>>
> >> > >>>>>> Ok, I changed agents requirements to builds and add them to
> >> runAll
> >> > >>>>>>
> >> > >>>>>> пн, 22 июн. 2020 г. в 22:39, Petr Ivanov <[hidden email]
> >:
> >> > >>>>>>
> >> > >>>>>>> Cmake is installed on all agents (except 10 which is currently
> >> down
> >> > >>> and
> >> > >>>>>>> will be updated later).
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>>>> On 22 Jun 2020, at 21:03, Ivan Daschinsky <
> [hidden email]
> >> >
> >> > >>> wrote:
> >> > >>>>>>>>
> >> > >>>>>>>> Well, patch is merged. Thank a lot to Igor Sapego for review.
> >> > >>>>>>>>
> >> > >>>>>>>> Peter, well, cmake now can be installed on all agent.
> >> > >>>>>>>>
> >> > >>>>>>>> I think it's time to add cmake suites to runAll and exclude
> old
> >> > >>> suites
> >> > >>>>>>> from
> >> > >>>>>>>> it.
> >> > >>>>>>>>
> >> > >>>>>>>> Patch with removing autotools I Will submit in few days.
> >> > >>>>>>>>
> >> > >>>>>>>> пн, 22 июн. 2020 г., 20:25 Ivan Daschinsky <
> >> [hidden email]>:
> >> > >>>>>>>>
> >> > >>>>>>>>> Hi folks!
> >> > >>>>>>>>>
> >> > >>>>>>>>> Good news -- I successfully created 2 CMake suites [1] [2]
> and
> >> > they
> >> > >>>>>>> works
> >> > >>>>>>>>> as a charm.
> >> > >>>>>>>>> Many thanks to Ilya Kasnacheev for giving me permissions and
> >> to
> >> > >>> Peter
> >> > >>>>>>>>> Ivanov for installing cmake and giving a whole agent for
> >> testing.
> >> > >>>>>>>>>
> >> > >>>>>>>>> [1] --
> >> > >>>>>>>>>
> >> > >>>>>>>
> >> > >>>
> >> >
> >>
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinuxClang&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> >> > >>>>>>>>> [2] --
> >> > >>>>>>>>>
> >> > >>>>>>>
> >> > >>>
> >> >
> >>
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinux&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> >> > >>>>>>>>>
> >> > >>>>>>>>> пн, 22 июн. 2020 г. в 12:03, Ilya Kasnacheev <
> >> > >>>>>>> [hidden email]>:
> >> > >>>>>>>>>
> >> > >>>>>>>>>> Hello!
> >> > >>>>>>>>>>
> >> > >>>>>>>>>> I think you should contact Peter Ivanov if you want
> anything
> >> to
> >> > be
> >> > >>>>>>>>>> installed on agents.
> >> > >>>>>>>>>>
> >> > >>>>>>>>>> Regards,
> >> > >>>>>>>>>> --
> >> > >>>>>>>>>> Ilya Kasnacheev
> >> > >>>>>>>>>>
> >> > >>>>>>>>>>
> >> > >>>>>>>>>> пн, 22 июн. 2020 г. в 12:00, Ivan Daschinsky <
> >> > [hidden email]
> >> > >>>> :
> >> > >>>>>>>>>>
> >> > >>>>>>>>>>> Actually, I'm going to create 2 new suites based on
> existing
> >> > >>> ones:
> >> > >>>>>>>>>>> 1. Platform C++ CMake (Linux)
> >> > >>>>>>>>>>> 2. Platform C++ CMake (Linux Clang)
> >> > >>>>>>>>>>>
> >> > >>>>>>>>>>> Ilya, thank you very much. But, despite the fact, that I
> >> have
> >> > >>>>>>>>>> permissions,
> >> > >>>>>>>>>>> it seems that it's impossible to install something
> (namely,
> >> > >>> CMake) on
> >> > >>>>>>>>>>> agents.
> >> > >>>>>>>>>>> How can I do this obviously essential task?
> >> > >>>>>>>>>>>
> >> > >>>>>>>>>>> пн, 22 июн. 2020 г. в 11:30, Ilya Kasnacheev <
> >> > >>>>>>> [hidden email]
> >> > >>>>>>>>>>> :
> >> > >>>>>>>>>>>
> >> > >>>>>>>>>>>> Hello!
> >> > >>>>>>>>>>>>
> >> > >>>>>>>>>>>> I have assigned roles on TC, you can now work on these
> >> builds.
> >> > >>>>>>>>>>>>
> >> > >>>>>>>>>>>> Please describe your changes on development list so that
> >> > people
> >> > >>>>>>>>>>> understand
> >> > >>>>>>>>>>>> what is going on.
> >> > >>>>>>>>>>>>
> >> > >>>>>>>>>>>> Regards,
> >> > >>>>>>>>>>>> --
> >> > >>>>>>>>>>>> Ilya Kasnacheev
> >> > >>>>>>>>>>>>
> >> > >>>>>>>>>>>>
> >> > >>>>>>>>>>>> вс, 21 июн. 2020 г. в 17:35, Ivan Daschinsky <
> >> > >>> [hidden email]>:
> >> > >>>>>>>>>>>>
> >> > >>>>>>>>>>>>> Hi folks.
> >> > >>>>>>>>>>>>>
> >> > >>>>>>>>>>>>> Patch is rigorously tested and with Igor Sapego help it
> is
> >> > >>> possible
> >> > >>>>>>>>>> to
> >> > >>>>>>>>>>>>> build with cmake Ignite.C++  even on windows.
> >> > >>>>>>>>>>>>> But, it's required to make some TC suites and tune them,
> >> in
> >> > >>> order
> >> > >>>>>>> to
> >> > >>>>>>>>>>>> patch
> >> > >>>>>>>>>>>>> be merged.
> >> > >>>>>>>>>>>>> Unfortunately, I am not a commiter and I doesn't have
> >> rights
> >> > to
> >> > >>>>>>>>>> create
> >> > >>>>>>>>>>>>> suites. Also, AFAIK, Igor currently is quite busy and
> >> doesn't
> >> > >>> have
> >> > >>>>>>>>>> much
> >> > >>>>>>>>>>>>> time to do this task by himself.
> >> > >>>>>>>>>>>>> So I need some help from community. Is it possible to
> >> grant
> >> > me
> >> > >>> some
> >> > >>>>>>>>>>>> rights
> >> > >>>>>>>>>>>>> to TC agents?
> >> > >>>>>>>>>>>>>
> >> > >>>>>>>>>>>>> ср, 3 июн. 2020 г. в 18:03, Nikolay Izhikov <
> >> > >>> [hidden email]>:
> >> > >>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>> Hello.
> >> > >>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>> I will do review of this changes.
> >> > >>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>> 1 июня 2020 г., в 13:21, Ivan Daschinsky <
> >> > >>> [hidden email]>
> >> > >>>>>>>>>>>>>> написал(а):
> >> > >>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>> Igor, could you please check my PR?
> >> > >>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:28, Ivan Daschinsky <
> >> > >>>>>>>>>> [hidden email]>:
> >> > >>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>> Thanks you all. Run patch (I've changed some code
> >> also) on
> >> > >>> TC
> >> > >>>>>>>>>> --
> >> > >>>>>>>>>>> all
> >> > >>>>>>>>>>>>> CPP
> >> > >>>>>>>>>>>>>>>> suites are green (GCC, CLang, Win64)
> >> > >>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:02, Zhenya Stanilovsky
> >> > >>>>>>>>>>>>>> <[hidden email]
> >> > >>>>>>>>>>>>>>>>> :
> >> > >>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>> Ivan besides documentation [1]
> >> > >>>>>>>>>>>>>>>>> -s no —  no works
> >> > >>>>>>>>>>>>>>>>> -- catch_system_errors =no — works properly well,
> >> tests
> >> > are
> >> > >>>>>>>>>>> passed.
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>> boost 1.65
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>> [1]
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>
> >> > >>>>>>>>>>>>
> >> > >>>>>>>>>>>
> >> > >>>>>>>>>>
> >> > >>>>>>>
> >> > >>>
> >> >
> >>
> https://www.boost.org/doc/libs/1_65_0/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/catch_system.html
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>> Hello!
> >> > >>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>> I didn't check tests since I don't develop AI C++,
> >> > merely
> >> > >>>>>>>>>> use it
> >> > >>>>>>>>>>>> as
> >> > >>>>>>>>>>>>>> user.
> >> > >>>>>>>>>>>>>>>>>> That's where we should wait for Igor Sapego to
> check.
> >> > >>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>> Regards,
> >> > >>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> >> > >>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 12:20, Ivan Daschinsky <
> >> > >>>>>>>>>>> [hidden email]
> >> > >>>>>>>>>>>>>> :
> >> > >>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>> Ilya, thanks a lot! What about tests? I found one
> >> flag
> >> > >>> that
> >> > >>>>>>>>>>> must
> >> > >>>>>>>>>>>> be
> >> > >>>>>>>>>>>>>>>>>>> supplied to boost.tests.
> >> > >>>>>>>>>>>>>>>>>>> This flag should fix JVM crash of C++ suites on
> >> Linux.
> >> > >>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>> Zhenya Stanilovsky and me have checked, that
> without
> >> > this
> >> > >>>>>>>>>> flag
> >> > >>>>>>>>>>>>> tests
> >> > >>>>>>>>>>>>>>>>> failed
> >> > >>>>>>>>>>>>>>>>>>> with SIGSEGV early (boost catch this signal from
> >> jvm,
> >> > but
> >> > >>>>>>>>>> it is
> >> > >>>>>>>>>>>> ok
> >> > >>>>>>>>>>>>>> for
> >> > >>>>>>>>>>>>>>>>>>> jvm).
> >> > >>>>>>>>>>>>>>>>>>> Flag is -catch_system_errors=no. I added it to
> CTest
> >> > >>> runner.
> >> > >>>>>>>>>>> You
> >> > >>>>>>>>>>>>> can
> >> > >>>>>>>>>>>>>>>>>>> invoke it manually and using make test ARGS="-V"
> >> > >>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 11:54, Ilya Kasnacheev <
> >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> >> > >>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>> Hello!
> >> > >>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>> Looks good to me! But we probably also ask Igor
> to
> >> > take
> >> > >>> a
> >> > >>>>>>>>>>> look.
> >> > >>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>> Compiled debug and release, without and with
> odbc,
> >> > >>> checked
> >> > >>>>>>>>>>>> running
> >> > >>>>>>>>>>>>>>>>> thick
> >> > >>>>>>>>>>>>>>>>>>>> node and ODBC connection on Linux.
> >> > >>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>> Regards,
> >> > >>>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> >> > >>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>> чт, 28 мая 2020 г. в 17:31, Ivan Daschinsky <
> >> > >>>>>>>>>>>> [hidden email]
> >> > >>>>>>>>>>>>>>> :
> >> > >>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>> Ok, PR is ready
> >> > >>>>>>>>>>>>>>>>>>>>>
> >> https://issues.apache.org/jira/browse/IGNITE-13078
> >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>> Build tested on Mac OS X 10.15 and Ubuntu 20.04
> >> with
> >> > >>> CMake
> >> > >>>>>>>>>>>> 3.17.2
> >> > >>>>>>>>>>>>>>>>> and
> >> > >>>>>>>>>>>>>>>>>>>> 3.6.1
> >> > >>>>>>>>>>>>>>>>>>>>> Unfortunately, I was not able to test on
> Windows,
> >> but
> >> > >>>>>>>>>>>> principally
> >> > >>>>>>>>>>>>>>>>> it
> >> > >>>>>>>>>>>>>>>>>>>> should
> >> > >>>>>>>>>>>>>>>>>>>>> works, but minor issues are probable.
> >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>> Instruction is attached in PR.
> >> > >>>>>>>>>>>>>>>>>>>>> Any use reports are welcomed!
> >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:51, Ivan Daschinsky <
> >> > >>>>>>>>>>>>> [hidden email]
> >> > >>>>>>>>>>>>>>>>>> :
> >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>> Stephen, looks great! I do mostly the same
> >> things in
> >> > >>> C++
> >> > >>>>>>>>>>> code.
> >> > >>>>>>>>>>>>>>>>> Thank
> >> > >>>>>>>>>>>>>>>>>>>> you!
> >> > >>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:33, Stephen Darlington
> <
> >> > >>>>>>>>>>>>>>>>>>>>>> [hidden email] >:
> >> > >>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>> Not sure if it’ll help, but I made some
> changes
> >> to
> >> > >>> get
> >> > >>>>>>>>>> it
> >> > >>>>>>>>>>>>>>>>> working
> >> > >>>>>>>>>>>>>>>>>>> on a
> >> > >>>>>>>>>>>>>>>>>>>>>>> Mac with the current built system. There may
> be
> >> > some
> >> > >>>>>>>>>> code
> >> > >>>>>>>>>>>> worth
> >> > >>>>>>>>>>>>>>>>>>>> taking.
> >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>> https://github.com/apache/ignite/pull/4872 <
> >> > >>>>>>>>>>>>>>>>>>>>>>> https://github.com/apache/ignite/pull/4872 >
> >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>> Regards,
> >> > >>>>>>>>>>>>>>>>>>>>>>> Stephen
> >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>> On 26 May 2020, at 16:02, Ivan Daschinsky <
> >> > >>>>>>>>>>>>>>>>> [hidden email] >
> >> > >>>>>>>>>>>>>>>>>>>>> wrote:
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>> I appreciate any help, thank you, Ilya.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>> Currently I have a small PR without ticket
> >> (link
> >> > in
> >> > >>>>>>>>>> first
> >> > >>>>>>>>>>>>>>>>>>> post),but
> >> > >>>>>>>>>>>>>>>>>>>> I
> >> > >>>>>>>>>>>>>>>>>>>>>>>> decided not to file a jira issue before
> >> > discussion.
> >> > >>>>>>>>>>>>>>>>>>>>>>>> Now I see, that this feature are of great
> >> interest
> >> > >>> to
> >> > >>>>>>>>>>>>>>>>> community.
> >> > >>>>>>>>>>>>>>>>>>> So
> >> > >>>>>>>>>>>>>>>>>>>> I
> >> > >>>>>>>>>>>>>>>>>>>>>>> file
> >> > >>>>>>>>>>>>>>>>>>>>>>>> a ticket, test myself on my home laptop
> (ubuntu
> >> > >>> 20.04)
> >> > >>>>>>>>>>>>>>>>>>>>>>>> and add detailed instructions to DEVNOTES.txt
> >> in a
> >> > >>> few
> >> > >>>>>>>>>>> days.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>> I would be happy if my someone can follow the
> >> > >>>>>>>>>> instruction
> >> > >>>>>>>>>>>> and
> >> > >>>>>>>>>>>>>>>>>>> write
> >> > >>>>>>>>>>>>>>>>>>>>>>>> possible issues.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>> I will notify about status update in this
> >> thread
> >> > in
> >> > >>>>>>>>>> next
> >> > >>>>>>>>>>> few
> >> > >>>>>>>>>>>>>>>>> days.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>> Thank you all very much for support!
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 17:50, Ilya Kasnacheev <
> >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> I will assist with checking on Linux if you
> >> would
> >> > >>>>>>>>>>>> contribute
> >> > >>>>>>>>>>>>>>>>> a
> >> > >>>>>>>>>>>>>>>>>>>> patch.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> Please start with a ticket (or even an IEP
> >> > maybe?)
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:47, Ivan Daschinsky
> <
> >> > >>>>>>>>>>>>>>>>> [hidden email]
> >> > >>>>>>>>>>>>>>>>>>>> :
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Guys, I will certainly thoroughly test my
> fix
> >> > not
> >> > >>>>>>>>>> only
> >> > >>>>>>>>>>>>>>>>> unices,
> >> > >>>>>>>>>>>>>>>>>>> but
> >> > >>>>>>>>>>>>>>>>>>>>> on
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> windows too.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> And I will describe it very thoroughly.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> When I was C++ developer (more than 10
> years
> >> > >>> ago), I
> >> > >>>>>>>>>>> have
> >> > >>>>>>>>>>>>>>>>> not
> >> > >>>>>>>>>>>>>>>>>>> any
> >> > >>>>>>>>>>>>>>>>>>>>>>> trouble
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> at all with CMake and Visual Studio 2005.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Everything works and works good. Moreover,
> >> you
> >> > can
> >> > >>>>>>>>>> build
> >> > >>>>>>>>>>>>>>>>> with
> >> > >>>>>>>>>>>>>>>>>>>> NMake,
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> msbuild and generate solutions for
> >> development.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> I suppose, for CI purposes, using NMake is
> a
> >> way
> >> > >>>>>>>>>> better,
> >> > >>>>>>>>>>>>>>>>> than
> >> > >>>>>>>>>>>>>>>>>>> use
> >> > >>>>>>>>>>>>>>>>>>>> vs
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> solutions.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:42, Nikolay
> Izhikov <
> >> > >>>>>>>>>>>>>>>>>>> [hidden email]
> >> > >>>>>>>>>>>>>>>>>>>>> :
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, Igor.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Nikolay, removing support for a certain
> >> build
> >> > >>>>>>>>>> system
> >> > >>>>>>>>>>> is
> >> > >>>>>>>>>>>> a
> >> > >>>>>>>>>>>>>>>>>>>> breaking
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> change.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> No, it’s not.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Why do you think so?
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Development environment and build system
> is
> >> a
> >> > >>>>>>>>>> subject
> >> > >>>>>>>>>>> to
> >> > >>>>>>>>>>>>>>>>> change
> >> > >>>>>>>>>>>>>>>>>>>> in
> >> > >>>>>>>>>>>>>>>>>>>>>>> any
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> project.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> We can drop or add support of any build
> >> system
> >> > >>> any
> >> > >>>>>>>>>> time
> >> > >>>>>>>>>>>> we
> >> > >>>>>>>>>>>>>>>>>>> want.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 26 мая 2020 г., в 16:35, Ilya Kasnacheev
> <
> >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> написал(а):
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't see why we can't get rid of
> >> autotools
> >> > >>> in a
> >> > >>>>>>>>>>> minor
> >> > >>>>>>>>>>>>>>>>>>>> release,
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> provided
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> that cmake actually works. Removing
> native
> >> VS
> >> > >>>>>>>>>> support
> >> > >>>>>>>>>>>> may
> >> > >>>>>>>>>>>>>>>>> be a
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> different
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> thing.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Build system and precise set of
> >> dependencies
> >> > is
> >> > >>>>>>>>>> not a
> >> > >>>>>>>>>>>>>>>>> part of
> >> > >>>>>>>>>>>>>>>>>>>>> public
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> API
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> in
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> my opinion.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:02, Igor Sapego <
> >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great!
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Let's start with creating a TC suite for
> >> it.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The only concern I have is that it is
> one
> >> > more
> >> > >>>>>>>>>> build
> >> > >>>>>>>>>>>>>>>>> system
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support. Should we get rid of
> >> autotools in
> >> > >>> 3.0?
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards,
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Igor
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 2:44 PM Alexey
> >> > >>> Kukushkin <
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [hidden email] >
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1. I recently completed a cross-IDE
> (MS
> >> > >>> Visual
> >> > >>>>>>>>>>>> Studio &
> >> > >>>>>>>>>>>>>>>>>>>>> GCC/GDB)
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Ignite
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C++ project and CMake in Ignite C++
> would
> >> > save
> >> > >>>>>>>>>> me a
> >> > >>>>>>>>>>>> day
> >> > >>>>>>>>>>>>>>>>> of
> >> > >>>>>>>>>>>>>>>>>>>>> effort.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 12:09, Pavel
> >> Tupitsyn <
> >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 12:02 PM
> Zhenya
> >> > >>>>>>>>>> Stanilovsky
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < [hidden email] > wrote:
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ivan huge +1 with your proposal.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I had some problems with odbc tests
> >> > building
> >> > >>>>>>>>>> too,
> >> > >>>>>>>>>>>>>>>>> looks
> >> > >>>>>>>>>>>>>>>>>>> like
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> cmake
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> will
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make it more easy.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Igniters.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d like to discuss porting build
> >> process
> >> > >>> of
> >> > >>>>>>>>>>>>>>>>> Ignite.C++.
> >> > >>>>>>>>>>>>>>>>>>> I
> >> > >>>>>>>>>>>>>>>>>>>>>>> think
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there is time to change it.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Motivation*
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, it is hard to build
> >> > Ignite.C++.
> >> > >>>>>>>>>>>> Different
> >> > >>>>>>>>>>>>>>>>>>> build
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> process
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> windows and linux, lack of building
> >> > support
> >> > >>> on
> >> > >>>>>>>>>> Mac
> >> > >>>>>>>>>>>> OS
> >> > >>>>>>>>>>>>>>>>> X
> >> > >>>>>>>>>>>>>>>>>>>> (quite
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> popular
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> among developers), absolutely not IDE
> >> > >>> support,
> >> > >>>>>>>>>>>> except
> >> > >>>>>>>>>>>>>>>>>>>> windows
> >> > >>>>>>>>>>>>>>>>>>>>>>> and
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> only
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio is supported.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Suggestion*
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d suggest to migrate to CMake
> build
> >> > >>> system.
> >> > >>>>>>>>>> It
> >> > >>>>>>>>>>> is
> >> > >>>>>>>>>>>>>>>>> very
> >> > >>>>>>>>>>>>>>>>>>>>>>> popular
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> among
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> open source projects, and in Apache
> >> > Software
> >> > >>>>>>>>>>>>>>>>> Foundation
> >> > >>>>>>>>>>>>>>>>>>> too.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Notable
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user:
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache Mesos, Apache Zookeeper (C
> >> client
> >> > >>> offers
> >> > >>>>>>>>>>>> CMake
> >> > >>>>>>>>>>>>>>>>> as
> >> > >>>>>>>>>>>>>>>>>>> an
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> alternative
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> autoconf and only option on windows),
> >> > Apache
> >> > >>>>>>>>>> Kafka
> >> > >>>>>>>>>>>>>>>>>>>>> (librdkafka -
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> C/C++
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> client), Apache Thrift. Popular
> >> > >>> column-oriented
> >> > >>>>>>>>>>>>>>>>> database
> >> > >>>>>>>>>>>>>>>>>>>>>>>>> ClickHouse
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uses CMake.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMake is widely supported in many
> >> IDE’s
> >> > on
> >> > >>>>>>>>>>> various
> >> > >>>>>>>>>>>>>>>>>>>> platforms,
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> notably
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio, CLion, Xcode,
> QtCreator,
> >> > >>>>>>>>>> KDevelop.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Current status*
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, the most of work is done
> >> (see
> >> > >>> [1])
> >> > >>>>>>>>>> and
> >> > >>>>>>>>>>>>>>>>> tested
> >> > >>>>>>>>>>>>>>>>>>> on
> >> > >>>>>>>>>>>>>>>>>>>>> Mac
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> OS X
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.15 (some C++ porting). All tests
> are
> >> > run
> >> > >>>>>>>>>>> without
> >> > >>>>>>>>>>>>>>>>> any
> >> > >>>>>>>>>>>>>>>>>>>> flaws,
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> odbc (unixodbc), ssl, thin and thick
> >> > client,
> >> > >>>>>>>>>>>>>>>>> installation,
> >> > >>>>>>>>>>>>>>>>>>>> IDE
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> integration
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (CLion). Next steps is to test linux
> >> and
> >> > >>>>>>>>>> windows.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But full migration isn’t possible
> >> without
> >> > >>>>>>>>>>> agreement
> >> > >>>>>>>>>>>>>>>>> and
> >> > >>>>>>>>>>>>>>>>>>>> help
> >> > >>>>>>>>>>>>>>>>>>>>> of
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> community. Even if most of all you
> >> agree,
> >> > >>>>>>>>>>> migration
> >> > >>>>>>>>>>>>>>>>>>> requires
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> additional
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> efforts in TC agents tuning and so on
> >> > (event
> >> > >>>>>>>>>>> though
> >> > >>>>>>>>>>>>>>>>> test
> >> > >>>>>>>>>>>>>>>>>>>>> running
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> fully
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> automated by CMake CTest).
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lets discuss my proposition and
> idea.
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] -
> >> > >>>>>>>>>>> https://github.com/apache/ignite/pull/7845
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>>
> >> > >>>>>>>>>>>>>
> >> > >>>>>>>>>>>>> --
> >> > >>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>>>
> >> > >>>>>>>>>>>>
> >> > >>>>>>>>>>>
> >> > >>>>>>>>>>>
> >> > >>>>>>>>>>> --
> >> > >>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>>>
> >> > >>>>>>>>>>
> >> > >>>>>>>>>
> >> > >>>>>>>>>
> >> > >>>>>>>>> --
> >> > >>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>>>>
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>>
> >> > >>>>>> --
> >> > >>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>>>
> >> > >>>>>
> >> > >>>>>
> >> > >>>>> --
> >> > >>>>> Sincerely yours, Ivan Daschinskiy
> >> > >>>>
> >> > >>>
> >> > >>>
> >> > >>
> >> > >> --
> >> > >> Sincerely yours, Ivan Daschinskiy
> >> > >>
> >> > >
> >> > >
> >> > > --
> >> > > Sincerely yours, Ivan Daschinskiy
> >> >
> >> >
> >>
> >
>
> --
> Sincerely yours, Ivan Daschinskiy
>

[Ivan Daschinsky]

Pavel, pay attention to two dots at the end. All build files should stay at
current dir, and cmake-build-release is supposed to be a build root. And
this directory is added to gitignore. Actually, build directory can be
everywhere, but you should pass path to dir, that contains root
CMakeLists.txt. Usually it is parent directory of cmake-build-release, so
double dot is used. It is so common pattern of usage and I simply cannot
understand why it is misleading.

ср, 1 июл. 2020 г., 0:48 Pavel Tupitsyn <[hidden email]>:

> This is awesome, thanks everyone!
>
> I've tried following the instructions, and the following two steps seem to
> be misleading:
> * mkdir cmake-build-[release|debug]
> * cd ./cmake-build-[release|debug]
>
> When I run cmake in the newly created cmake-build-debug dir, I get:
> CMake Error: The source directory
> "/home/pavel/w/ignite/modules/platforms/cpp/cmake-build-release" does not
> appear to contain CMakeLists.txt.
>
> If I skip those 2 steps, I can build Ignite C++ and run tests with ctest on
> Ubuntu 20.04.
>
>
> Another observation: building the project produces untracked git files.
> Should we update gitignore accordingly?
>
>
> Thanks,
> Pavel
>
>
> On Tue, Jun 30, 2020 at 9:33 PM Ivan Daschinsky <[hidden email]>
> wrote:
>
> > Ok, CMake now is the only option to build C++ on non-windows platforms.
> > Autotools is removed from master.
> >
> > Many thanks to Igor Sapego, Zhenya Stanilovsky, Nickolay Izhikov and Ilya
> > Kasnacheev for review, testing and suggestions.
> >
> > вт, 23 июн. 2020 г. в 18:42, Ivan Daschinsky <[hidden email]>:
> >
> > > I suppose, that removal of autotools from source code is a question of
> a
> > > week. There is no need to support it.
> > >
> > > вт, 23 июн. 2020 г., 18:38 Ilya Kasnacheev <[hidden email]
> >:
> > >
> > >> Hello!
> > >>
> > >> Once you do that, I think it would make sense to remove autotools
> > >> invocation from artifact build process. In the future we may choose to
> > >> remove autotools support entirely.
> > >>
> > >> Regards,
> > >> --
> > >> Ilya Kasnacheev
> > >>
> > >>
> > >> вт, 23 июн. 2020 г. в 18:00, Petr Ivanov <[hidden email]>:
> > >>
> > >> > That host was down for some time and got up only recently.
> > >> > Installed cmake there also.
> > >> >
> > >> >
> > >> >
> > >> > > On 23 Jun 2020, at 17:39, Ivan Daschinsky <[hidden email]>
> > >> wrote:
> > >> > >
> > >> > > Petr, I see, that cmake is missing on aitc10_05 but it is in pool
> > and
> > >> > > trying to run build.
> > >> > >
> > >> > > [1] --
> > >> > >
> > >> >
> > >>
> >
> https://ci.ignite.apache.org/buildConfiguration/IgniteTests24Java8_PlatformCPPCMakeLinux/5412025
> > >> > >
> > >> > > вт, 23 июн. 2020 г. в 17:33, Ivan Daschinsky <[hidden email]
> >:
> > >> > >
> > >> > >>>> For the sake of discretion, I'd purpose to remove old suites
> from
> > >> Run
> > >> > >> All and archive or pause them for some time before removal.
> > >> > >> Agree, I was talking about removal from RunAll chain, complete
> > >> removal
> > >> > is
> > >> > >> not necessary.
> > >> > >> But after private discussion with Igor Sapego, me and he decided
> to
> > >> wait
> > >> > >> for a week before exclusion of these suites from RunAll.
> > >> > >>
> > >> > >> вт, 23 июн. 2020 г. в 17:21, Petr Ivanov <[hidden email]>:
> > >> > >>
> > >> > >>> For the sake of discretion, I'd purpose to remove old suites
> from
> > >> Run
> > >> > All
> > >> > >>> and archive or pause them for some time before removal.
> > >> > >>>
> > >> > >>>
> > >> > >>>> On 23 Jun 2020, at 13:26, Nikolay Izhikov <[hidden email]
> >
> > >> > wrote:
> > >> > >>>>
> > >> > >>>>> So, folks, is it ok to remove old suites from build chain
> > >> > >>>>
> > >> > >>>> +1 from me.
> > >> > >>>>
> > >> > >>>>
> > >> > >>>>> 23 июня 2020 г., в 13:15, Ivan Daschinsky <
> [hidden email]>
> > >> > >>> написал(а):
> > >> > >>>>>
> > >> > >>>>> Well, new suites added to RunAll and all seems to be ok.
> > >> > >>>>>
> > >> > >>>>> I think it is time to remove old suites.
> > >> > >>>>> WDYT?
> > >> > >>>>>
> > >> > >>>>> Also, I created patch with removal of autotools, but old
> suites
> > >> > should
> > >> > >>> be
> > >> > >>>>> removed first.
> > >> > >>>>>
> > >> > >>>>> So, folks, is it ok to remove old suites from build chain?
> > >> > >>>>>
> > >> > >>>>> вт, 23 июн. 2020 г. в 10:36, Ivan Daschinsky <
> > [hidden email]
> > >> >:
> > >> > >>>>>
> > >> > >>>>>> Ok, I changed agents requirements to builds and add them to
> > >> runAll
> > >> > >>>>>>
> > >> > >>>>>> пн, 22 июн. 2020 г. в 22:39, Petr Ivanov <
> [hidden email]
> > >:
> > >> > >>>>>>
> > >> > >>>>>>> Cmake is installed on all agents (except 10 which is
> currently
> > >> down
> > >> > >>> and
> > >> > >>>>>>> will be updated later).
> > >> > >>>>>>>
> > >> > >>>>>>>
> > >> > >>>>>>>> On 22 Jun 2020, at 21:03, Ivan Daschinsky <
> > [hidden email]
> > >> >
> > >> > >>> wrote:
> > >> > >>>>>>>>
> > >> > >>>>>>>> Well, patch is merged. Thank a lot to Igor Sapego for
> review.
> > >> > >>>>>>>>
> > >> > >>>>>>>> Peter, well, cmake now can be installed on all agent.
> > >> > >>>>>>>>
> > >> > >>>>>>>> I think it's time to add cmake suites to runAll and exclude
> > old
> > >> > >>> suites
> > >> > >>>>>>> from
> > >> > >>>>>>>> it.
> > >> > >>>>>>>>
> > >> > >>>>>>>> Patch with removing autotools I Will submit in few days.
> > >> > >>>>>>>>
> > >> > >>>>>>>> пн, 22 июн. 2020 г., 20:25 Ivan Daschinsky <
> > >> [hidden email]>:
> > >> > >>>>>>>>
> > >> > >>>>>>>>> Hi folks!
> > >> > >>>>>>>>>
> > >> > >>>>>>>>> Good news -- I successfully created 2 CMake suites [1] [2]
> > and
> > >> > they
> > >> > >>>>>>> works
> > >> > >>>>>>>>> as a charm.
> > >> > >>>>>>>>> Many thanks to Ilya Kasnacheev for giving me permissions
> and
> > >> to
> > >> > >>> Peter
> > >> > >>>>>>>>> Ivanov for installing cmake and giving a whole agent for
> > >> testing.
> > >> > >>>>>>>>>
> > >> > >>>>>>>>> [1] --
> > >> > >>>>>>>>>
> > >> > >>>>>>>
> > >> > >>>
> > >> >
> > >>
> >
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinuxClang&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> > >> > >>>>>>>>> [2] --
> > >> > >>>>>>>>>
> > >> > >>>>>>>
> > >> > >>>
> > >> >
> > >>
> >
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinux&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> > >> > >>>>>>>>>
> > >> > >>>>>>>>> пн, 22 июн. 2020 г. в 12:03, Ilya Kasnacheev <
> > >> > >>>>>>> [hidden email]>:
> > >> > >>>>>>>>>
> > >> > >>>>>>>>>> Hello!
> > >> > >>>>>>>>>>
> > >> > >>>>>>>>>> I think you should contact Peter Ivanov if you want
> > anything
> > >> to
> > >> > be
> > >> > >>>>>>>>>> installed on agents.
> > >> > >>>>>>>>>>
> > >> > >>>>>>>>>> Regards,
> > >> > >>>>>>>>>> --
> > >> > >>>>>>>>>> Ilya Kasnacheev
> > >> > >>>>>>>>>>
> > >> > >>>>>>>>>>
> > >> > >>>>>>>>>> пн, 22 июн. 2020 г. в 12:00, Ivan Daschinsky <
> > >> > [hidden email]
> > >> > >>>> :
> > >> > >>>>>>>>>>
> > >> > >>>>>>>>>>> Actually, I'm going to create 2 new suites based on
> > existing
> > >> > >>> ones:
> > >> > >>>>>>>>>>> 1. Platform C++ CMake (Linux)
> > >> > >>>>>>>>>>> 2. Platform C++ CMake (Linux Clang)
> > >> > >>>>>>>>>>>
> > >> > >>>>>>>>>>> Ilya, thank you very much. But, despite the fact, that I
> > >> have
> > >> > >>>>>>>>>> permissions,
> > >> > >>>>>>>>>>> it seems that it's impossible to install something
> > (namely,
> > >> > >>> CMake) on
> > >> > >>>>>>>>>>> agents.
> > >> > >>>>>>>>>>> How can I do this obviously essential task?
> > >> > >>>>>>>>>>>
> > >> > >>>>>>>>>>> пн, 22 июн. 2020 г. в 11:30, Ilya Kasnacheev <
> > >> > >>>>>>> [hidden email]
> > >> > >>>>>>>>>>> :
> > >> > >>>>>>>>>>>
> > >> > >>>>>>>>>>>> Hello!
> > >> > >>>>>>>>>>>>
> > >> > >>>>>>>>>>>> I have assigned roles on TC, you can now work on these
> > >> builds.
> > >> > >>>>>>>>>>>>
> > >> > >>>>>>>>>>>> Please describe your changes on development list so
> that
> > >> > people
> > >> > >>>>>>>>>>> understand
> > >> > >>>>>>>>>>>> what is going on.
> > >> > >>>>>>>>>>>>
> > >> > >>>>>>>>>>>> Regards,
> > >> > >>>>>>>>>>>> --
> > >> > >>>>>>>>>>>> Ilya Kasnacheev
> > >> > >>>>>>>>>>>>
> > >> > >>>>>>>>>>>>
> > >> > >>>>>>>>>>>> вс, 21 июн. 2020 г. в 17:35, Ivan Daschinsky <
> > >> > >>> [hidden email]>:
> > >> > >>>>>>>>>>>>
> > >> > >>>>>>>>>>>>> Hi folks.
> > >> > >>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>> Patch is rigorously tested and with Igor Sapego help
> it
> > is
> > >> > >>> possible
> > >> > >>>>>>>>>> to
> > >> > >>>>>>>>>>>>> build with cmake Ignite.C++  even on windows.
> > >> > >>>>>>>>>>>>> But, it's required to make some TC suites and tune
> them,
> > >> in
> > >> > >>> order
> > >> > >>>>>>> to
> > >> > >>>>>>>>>>>> patch
> > >> > >>>>>>>>>>>>> be merged.
> > >> > >>>>>>>>>>>>> Unfortunately, I am not a commiter and I doesn't have
> > >> rights
> > >> > to
> > >> > >>>>>>>>>> create
> > >> > >>>>>>>>>>>>> suites. Also, AFAIK, Igor currently is quite busy and
> > >> doesn't
> > >> > >>> have
> > >> > >>>>>>>>>> much
> > >> > >>>>>>>>>>>>> time to do this task by himself.
> > >> > >>>>>>>>>>>>> So I need some help from community. Is it possible to
> > >> grant
> > >> > me
> > >> > >>> some
> > >> > >>>>>>>>>>>> rights
> > >> > >>>>>>>>>>>>> to TC agents?
> > >> > >>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>> ср, 3 июн. 2020 г. в 18:03, Nikolay Izhikov <
> > >> > >>> [hidden email]>:
> > >> > >>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>> Hello.
> > >> > >>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>> I will do review of this changes.
> > >> > >>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>> 1 июня 2020 г., в 13:21, Ivan Daschinsky <
> > >> > >>> [hidden email]>
> > >> > >>>>>>>>>>>>>> написал(а):
> > >> > >>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>> Igor, could you please check my PR?
> > >> > >>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:28, Ivan Daschinsky <
> > >> > >>>>>>>>>> [hidden email]>:
> > >> > >>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>> Thanks you all. Run patch (I've changed some code
> > >> also) on
> > >> > >>> TC
> > >> > >>>>>>>>>> --
> > >> > >>>>>>>>>>> all
> > >> > >>>>>>>>>>>>> CPP
> > >> > >>>>>>>>>>>>>>>> suites are green (GCC, CLang, Win64)
> > >> > >>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:02, Zhenya Stanilovsky
> > >> > >>>>>>>>>>>>>> <[hidden email]
> > >> > >>>>>>>>>>>>>>>>> :
> > >> > >>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>> Ivan besides documentation [1]
> > >> > >>>>>>>>>>>>>>>>> -s no —  no works
> > >> > >>>>>>>>>>>>>>>>> -- catch_system_errors =no — works properly well,
> > >> tests
> > >> > are
> > >> > >>>>>>>>>>> passed.
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>> boost 1.65
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>> [1]
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>
> > >> > >>>>>>>>>>>
> > >> > >>>>>>>>>>
> > >> > >>>>>>>
> > >> > >>>
> > >> >
> > >>
> >
> https://www.boost.org/doc/libs/1_65_0/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/catch_system.html
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>> Hello!
> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>> I didn't check tests since I don't develop AI
> C++,
> > >> > merely
> > >> > >>>>>>>>>> use it
> > >> > >>>>>>>>>>>> as
> > >> > >>>>>>>>>>>>>> user.
> > >> > >>>>>>>>>>>>>>>>>> That's where we should wait for Igor Sapego to
> > check.
> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>> Regards,
> > >> > >>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 12:20, Ivan Daschinsky <
> > >> > >>>>>>>>>>> [hidden email]
> > >> > >>>>>>>>>>>>>> :
> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>> Ilya, thanks a lot! What about tests? I found
> one
> > >> flag
> > >> > >>> that
> > >> > >>>>>>>>>>> must
> > >> > >>>>>>>>>>>> be
> > >> > >>>>>>>>>>>>>>>>>>> supplied to boost.tests.
> > >> > >>>>>>>>>>>>>>>>>>> This flag should fix JVM crash of C++ suites on
> > >> Linux.
> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>> Zhenya Stanilovsky and me have checked, that
> > without
> > >> > this
> > >> > >>>>>>>>>> flag
> > >> > >>>>>>>>>>>>> tests
> > >> > >>>>>>>>>>>>>>>>> failed
> > >> > >>>>>>>>>>>>>>>>>>> with SIGSEGV early (boost catch this signal from
> > >> jvm,
> > >> > but
> > >> > >>>>>>>>>> it is
> > >> > >>>>>>>>>>>> ok
> > >> > >>>>>>>>>>>>>> for
> > >> > >>>>>>>>>>>>>>>>>>> jvm).
> > >> > >>>>>>>>>>>>>>>>>>> Flag is -catch_system_errors=no. I added it to
> > CTest
> > >> > >>> runner.
> > >> > >>>>>>>>>>> You
> > >> > >>>>>>>>>>>>> can
> > >> > >>>>>>>>>>>>>>>>>>> invoke it manually and using make test ARGS="-V"
> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 11:54, Ilya Kasnacheev <
> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>> Hello!
> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>> Looks good to me! But we probably also ask Igor
> > to
> > >> > take
> > >> > >>> a
> > >> > >>>>>>>>>>> look.
> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>> Compiled debug and release, without and with
> > odbc,
> > >> > >>> checked
> > >> > >>>>>>>>>>>> running
> > >> > >>>>>>>>>>>>>>>>> thick
> > >> > >>>>>>>>>>>>>>>>>>>> node and ODBC connection on Linux.
> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>> Regards,
> > >> > >>>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>> чт, 28 мая 2020 г. в 17:31, Ivan Daschinsky <
> > >> > >>>>>>>>>>>> [hidden email]
> > >> > >>>>>>>>>>>>>>> :
> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>> Ok, PR is ready
> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> https://issues.apache.org/jira/browse/IGNITE-13078
> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>> Build tested on Mac OS X 10.15 and Ubuntu
> 20.04
> > >> with
> > >> > >>> CMake
> > >> > >>>>>>>>>>>> 3.17.2
> > >> > >>>>>>>>>>>>>>>>> and
> > >> > >>>>>>>>>>>>>>>>>>>> 3.6.1
> > >> > >>>>>>>>>>>>>>>>>>>>> Unfortunately, I was not able to test on
> > Windows,
> > >> but
> > >> > >>>>>>>>>>>> principally
> > >> > >>>>>>>>>>>>>>>>> it
> > >> > >>>>>>>>>>>>>>>>>>>> should
> > >> > >>>>>>>>>>>>>>>>>>>>> works, but minor issues are probable.
> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>> Instruction is attached in PR.
> > >> > >>>>>>>>>>>>>>>>>>>>> Any use reports are welcomed!
> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:51, Ivan Daschinsky <
> > >> > >>>>>>>>>>>>> [hidden email]
> > >> > >>>>>>>>>>>>>>>>>> :
> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>> Stephen, looks great! I do mostly the same
> > >> things in
> > >> > >>> C++
> > >> > >>>>>>>>>>> code.
> > >> > >>>>>>>>>>>>>>>>> Thank
> > >> > >>>>>>>>>>>>>>>>>>>> you!
> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:33, Stephen
> Darlington
> > <
> > >> > >>>>>>>>>>>>>>>>>>>>>> [hidden email] >:
> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>> Not sure if it’ll help, but I made some
> > changes
> > >> to
> > >> > >>> get
> > >> > >>>>>>>>>> it
> > >> > >>>>>>>>>>>>>>>>> working
> > >> > >>>>>>>>>>>>>>>>>>> on a
> > >> > >>>>>>>>>>>>>>>>>>>>>>> Mac with the current built system. There may
> > be
> > >> > some
> > >> > >>>>>>>>>> code
> > >> > >>>>>>>>>>>> worth
> > >> > >>>>>>>>>>>>>>>>>>>> taking.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>> https://github.com/apache/ignite/pull/4872
> <
> > >> > >>>>>>>>>>>>>>>>>>>>>>> https://github.com/apache/ignite/pull/4872
> >
> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>> Regards,
> > >> > >>>>>>>>>>>>>>>>>>>>>>> Stephen
> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> On 26 May 2020, at 16:02, Ivan Daschinsky <
> > >> > >>>>>>>>>>>>>>>>> [hidden email] >
> > >> > >>>>>>>>>>>>>>>>>>>>> wrote:
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I appreciate any help, thank you, Ilya.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Currently I have a small PR without ticket
> > >> (link
> > >> > in
> > >> > >>>>>>>>>> first
> > >> > >>>>>>>>>>>>>>>>>>> post),but
> > >> > >>>>>>>>>>>>>>>>>>>> I
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> decided not to file a jira issue before
> > >> > discussion.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Now I see, that this feature are of great
> > >> interest
> > >> > >>> to
> > >> > >>>>>>>>>>>>>>>>> community.
> > >> > >>>>>>>>>>>>>>>>>>> So
> > >> > >>>>>>>>>>>>>>>>>>>> I
> > >> > >>>>>>>>>>>>>>>>>>>>>>> file
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> a ticket, test myself on my home laptop
> > (ubuntu
> > >> > >>> 20.04)
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> and add detailed instructions to
> DEVNOTES.txt
> > >> in a
> > >> > >>> few
> > >> > >>>>>>>>>>> days.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I would be happy if my someone can follow
> the
> > >> > >>>>>>>>>> instruction
> > >> > >>>>>>>>>>>> and
> > >> > >>>>>>>>>>>>>>>>>>> write
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> possible issues.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I will notify about status update in this
> > >> thread
> > >> > in
> > >> > >>>>>>>>>> next
> > >> > >>>>>>>>>>> few
> > >> > >>>>>>>>>>>>>>>>> days.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Thank you all very much for support!
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 17:50, Ilya
> Kasnacheev <
> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> I will assist with checking on Linux if
> you
> > >> would
> > >> > >>>>>>>>>>>> contribute
> > >> > >>>>>>>>>>>>>>>>> a
> > >> > >>>>>>>>>>>>>>>>>>>> patch.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Please start with a ticket (or even an IEP
> > >> > maybe?)
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:47, Ivan
> Daschinsky
> > <
> > >> > >>>>>>>>>>>>>>>>> [hidden email]
> > >> > >>>>>>>>>>>>>>>>>>>> :
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Guys, I will certainly thoroughly test my
> > fix
> > >> > not
> > >> > >>>>>>>>>> only
> > >> > >>>>>>>>>>>>>>>>> unices,
> > >> > >>>>>>>>>>>>>>>>>>> but
> > >> > >>>>>>>>>>>>>>>>>>>>> on
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> windows too.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> And I will describe it very thoroughly.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> When I was C++ developer (more than 10
> > years
> > >> > >>> ago), I
> > >> > >>>>>>>>>>> have
> > >> > >>>>>>>>>>>>>>>>> not
> > >> > >>>>>>>>>>>>>>>>>>> any
> > >> > >>>>>>>>>>>>>>>>>>>>>>> trouble
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> at all with CMake and Visual Studio 2005.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Everything works and works good.
> Moreover,
> > >> you
> > >> > can
> > >> > >>>>>>>>>> build
> > >> > >>>>>>>>>>>>>>>>> with
> > >> > >>>>>>>>>>>>>>>>>>>> NMake,
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> msbuild and generate solutions for
> > >> development.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> I suppose, for CI purposes, using NMake
> is
> > a
> > >> way
> > >> > >>>>>>>>>> better,
> > >> > >>>>>>>>>>>>>>>>> than
> > >> > >>>>>>>>>>>>>>>>>>> use
> > >> > >>>>>>>>>>>>>>>>>>>> vs
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> solutions.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:42, Nikolay
> > Izhikov <
> > >> > >>>>>>>>>>>>>>>>>>> [hidden email]
> > >> > >>>>>>>>>>>>>>>>>>>>> :
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, Igor.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Nikolay, removing support for a certain
> > >> build
> > >> > >>>>>>>>>> system
> > >> > >>>>>>>>>>> is
> > >> > >>>>>>>>>>>> a
> > >> > >>>>>>>>>>>>>>>>>>>> breaking
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> change.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> No, it’s not.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Why do you think so?
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Development environment and build system
> > is
> > >> a
> > >> > >>>>>>>>>> subject
> > >> > >>>>>>>>>>> to
> > >> > >>>>>>>>>>>>>>>>> change
> > >> > >>>>>>>>>>>>>>>>>>>> in
> > >> > >>>>>>>>>>>>>>>>>>>>>>> any
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> project.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> We can drop or add support of any build
> > >> system
> > >> > >>> any
> > >> > >>>>>>>>>> time
> > >> > >>>>>>>>>>>> we
> > >> > >>>>>>>>>>>>>>>>>>> want.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 26 мая 2020 г., в 16:35, Ilya
> Kasnacheev
> > <
> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> написал(а):
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't see why we can't get rid of
> > >> autotools
> > >> > >>> in a
> > >> > >>>>>>>>>>> minor
> > >> > >>>>>>>>>>>>>>>>>>>> release,
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> provided
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> that cmake actually works. Removing
> > native
> > >> VS
> > >> > >>>>>>>>>> support
> > >> > >>>>>>>>>>>> may
> > >> > >>>>>>>>>>>>>>>>> be a
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> different
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> thing.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Build system and precise set of
> > >> dependencies
> > >> > is
> > >> > >>>>>>>>>> not a
> > >> > >>>>>>>>>>>>>>>>> part of
> > >> > >>>>>>>>>>>>>>>>>>>>> public
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> API
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> in
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> my opinion.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:02, Igor
> Sapego <
> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great!
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Let's start with creating a TC suite
> for
> > >> it.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The only concern I have is that it is
> > one
> > >> > more
> > >> > >>>>>>>>>> build
> > >> > >>>>>>>>>>>>>>>>> system
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support. Should we get rid of
> > >> autotools in
> > >> > >>> 3.0?
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards,
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Igor
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 2:44 PM Alexey
> > >> > >>> Kukushkin <
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [hidden email] >
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1. I recently completed a cross-IDE
> > (MS
> > >> > >>> Visual
> > >> > >>>>>>>>>>>> Studio &
> > >> > >>>>>>>>>>>>>>>>>>>>> GCC/GDB)
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Ignite
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C++ project and CMake in Ignite C++
> > would
> > >> > save
> > >> > >>>>>>>>>> me a
> > >> > >>>>>>>>>>>> day
> > >> > >>>>>>>>>>>>>>>>> of
> > >> > >>>>>>>>>>>>>>>>>>>>> effort.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 12:09, Pavel
> > >> Tupitsyn <
> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 12:02 PM
> > Zhenya
> > >> > >>>>>>>>>> Stanilovsky
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < [hidden email] >
> wrote:
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ivan huge +1 with your proposal.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I had some problems with odbc tests
> > >> > building
> > >> > >>>>>>>>>> too,
> > >> > >>>>>>>>>>>>>>>>> looks
> > >> > >>>>>>>>>>>>>>>>>>> like
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> cmake
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> will
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make it more easy.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Igniters.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d like to discuss porting build
> > >> process
> > >> > >>> of
> > >> > >>>>>>>>>>>>>>>>> Ignite.C++.
> > >> > >>>>>>>>>>>>>>>>>>> I
> > >> > >>>>>>>>>>>>>>>>>>>>>>> think
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there is time to change it.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Motivation*
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, it is hard to build
> > >> > Ignite.C++.
> > >> > >>>>>>>>>>>> Different
> > >> > >>>>>>>>>>>>>>>>>>> build
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> process
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> windows and linux, lack of building
> > >> > support
> > >> > >>> on
> > >> > >>>>>>>>>> Mac
> > >> > >>>>>>>>>>>> OS
> > >> > >>>>>>>>>>>>>>>>> X
> > >> > >>>>>>>>>>>>>>>>>>>> (quite
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> popular
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> among developers), absolutely not
> IDE
> > >> > >>> support,
> > >> > >>>>>>>>>>>> except
> > >> > >>>>>>>>>>>>>>>>>>>> windows
> > >> > >>>>>>>>>>>>>>>>>>>>>>> and
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> only
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio is supported.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Suggestion*
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d suggest to migrate to CMake
> > build
> > >> > >>> system.
> > >> > >>>>>>>>>> It
> > >> > >>>>>>>>>>> is
> > >> > >>>>>>>>>>>>>>>>> very
> > >> > >>>>>>>>>>>>>>>>>>>>>>> popular
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> among
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> open source projects, and in Apache
> > >> > Software
> > >> > >>>>>>>>>>>>>>>>> Foundation
> > >> > >>>>>>>>>>>>>>>>>>> too.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Notable
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user:
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache Mesos, Apache Zookeeper (C
> > >> client
> > >> > >>> offers
> > >> > >>>>>>>>>>>> CMake
> > >> > >>>>>>>>>>>>>>>>> as
> > >> > >>>>>>>>>>>>>>>>>>> an
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> alternative
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> autoconf and only option on
> windows),
> > >> > Apache
> > >> > >>>>>>>>>> Kafka
> > >> > >>>>>>>>>>>>>>>>>>>>> (librdkafka -
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> C/C++
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> client), Apache Thrift. Popular
> > >> > >>> column-oriented
> > >> > >>>>>>>>>>>>>>>>> database
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> ClickHouse
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uses CMake.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMake is widely supported in many
> > >> IDE’s
> > >> > on
> > >> > >>>>>>>>>>> various
> > >> > >>>>>>>>>>>>>>>>>>>> platforms,
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> notably
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio, CLion, Xcode,
> > QtCreator,
> > >> > >>>>>>>>>> KDevelop.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Current status*
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, the most of work is
> done
> > >> (see
> > >> > >>> [1])
> > >> > >>>>>>>>>> and
> > >> > >>>>>>>>>>>>>>>>> tested
> > >> > >>>>>>>>>>>>>>>>>>> on
> > >> > >>>>>>>>>>>>>>>>>>>>> Mac
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> OS X
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.15 (some C++ porting). All tests
> > are
> > >> > run
> > >> > >>>>>>>>>>> without
> > >> > >>>>>>>>>>>>>>>>> any
> > >> > >>>>>>>>>>>>>>>>>>>> flaws,
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> odbc (unixodbc), ssl, thin and
> thick
> > >> > client,
> > >> > >>>>>>>>>>>>>>>>> installation,
> > >> > >>>>>>>>>>>>>>>>>>>> IDE
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> integration
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (CLion). Next steps is to test
> linux
> > >> and
> > >> > >>>>>>>>>> windows.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But full migration isn’t possible
> > >> without
> > >> > >>>>>>>>>>> agreement
> > >> > >>>>>>>>>>>>>>>>> and
> > >> > >>>>>>>>>>>>>>>>>>>> help
> > >> > >>>>>>>>>>>>>>>>>>>>> of
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> community. Even if most of all you
> > >> agree,
> > >> > >>>>>>>>>>> migration
> > >> > >>>>>>>>>>>>>>>>>>> requires
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> additional
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> efforts in TC agents tuning and so
> on
> > >> > (event
> > >> > >>>>>>>>>>> though
> > >> > >>>>>>>>>>>>>>>>> test
> > >> > >>>>>>>>>>>>>>>>>>>>> running
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> fully
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> automated by CMake CTest).
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lets discuss my proposition and
> > idea.
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] -
> > >> > >>>>>>>>>>> https://github.com/apache/ignite/pull/7845
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>> --
> > >> > >>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>>>
> > >> > >>>>>>>>>>>>
> > >> > >>>>>>>>>>>
> > >> > >>>>>>>>>>>
> > >> > >>>>>>>>>>> --
> > >> > >>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>>>
> > >> > >>>>>>>>>>
> > >> > >>>>>>>>>
> > >> > >>>>>>>>>
> > >> > >>>>>>>>> --
> > >> > >>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>>>>
> > >> > >>>>>>>
> > >> > >>>>>>>
> > >> > >>>>>>
> > >> > >>>>>> --
> > >> > >>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>>>
> > >> > >>>>>
> > >> > >>>>>
> > >> > >>>>> --
> > >> > >>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >>>>
> > >> > >>>
> > >> > >>>
> > >> > >>
> > >> > >> --
> > >> > >> Sincerely yours, Ivan Daschinskiy
> > >> > >>
> > >> > >
> > >> > >
> > >> > > --
> > >> > > Sincerely yours, Ivan Daschinskiy
> > >> >
> > >> >
> > >>
> > >
> >
> > --
> > Sincerely yours, Ivan Daschinskiy
> >
>

[Ivan Daschinsky]

Let me explain with details.

CMake is unusual from other build systems, that it can separate build root
and source root. Moreover, it is strongly discouraged to mix them.
Benefits:
1. You can have many build with different options using same source.
2. You can build project with different toolchain using same source.
3. You can build project for different platforms using same source
(cross-compilation, docker, etc.)

Common patter is:
1. Create build root.
2. Change current dir to build root.
3. Invoke cmake in build root, pointing to source root.

Usually build root is subdirectory, of source root. So, as it mentioned in
DEVNOTES.txt, usual steps are:
1. mdkir <build_root> (usually named cmake-build-<build-type>[-<toolchain>]
2. cd <build_root>
3. cmake [-DOPTION1=VALUE1 -DOPTION2=VALUE2 ... ] .. (NB! This double dots
are important, they points to source root)

This is so common, that you can hardly find any tutorial about CMake in
google without thes double dots. This is basic of CMake.

So if you think that we should explain for C++ developers basics of the
most common build system (CMake is really very popular and nowadays usually
must for new projects),
we can add this to DEVNOTES.txt. But I think that is not necessary at all.
For example, we don't explain basics of maven, though it is not obvious at
all as it seems to us, Ignite developers.

ср, 1 июл. 2020 г. в 06:18, Ivan Daschinsky <[hidden email]>:

> Pavel, pay attention to two dots at the end. All build files should stay
> at current dir, and cmake-build-release is supposed to be a build root. And
> this directory is added to gitignore. Actually, build directory can be
> everywhere, but you should pass path to dir, that contains root
> CMakeLists.txt. Usually it is parent directory of cmake-build-release, so
> double dot is used. It is so common pattern of usage and I simply cannot
> understand why it is misleading.
>
> ср, 1 июл. 2020 г., 0:48 Pavel Tupitsyn <[hidden email]>:
>
>> This is awesome, thanks everyone!
>>
>> I've tried following the instructions, and the following two steps seem to
>> be misleading:
>> * mkdir cmake-build-[release|debug]
>> * cd ./cmake-build-[release|debug]
>>
>> When I run cmake in the newly created cmake-build-debug dir, I get:
>> CMake Error: The source directory
>> "/home/pavel/w/ignite/modules/platforms/cpp/cmake-build-release" does not
>> appear to contain CMakeLists.txt.
>>
>> If I skip those 2 steps, I can build Ignite C++ and run tests with ctest
>> on
>> Ubuntu 20.04.
>>
>>
>> Another observation: building the project produces untracked git files.
>> Should we update gitignore accordingly?
>>
>>
>> Thanks,
>> Pavel
>>
>>
>> On Tue, Jun 30, 2020 at 9:33 PM Ivan Daschinsky <[hidden email]>
>> wrote:
>>
>> > Ok, CMake now is the only option to build C++ on non-windows platforms.
>> > Autotools is removed from master.
>> >
>> > Many thanks to Igor Sapego, Zhenya Stanilovsky, Nickolay Izhikov and
>> Ilya
>> > Kasnacheev for review, testing and suggestions.
>> >
>> > вт, 23 июн. 2020 г. в 18:42, Ivan Daschinsky <[hidden email]>:
>> >
>> > > I suppose, that removal of autotools from source code is a question
>> of a
>> > > week. There is no need to support it.
>> > >
>> > > вт, 23 июн. 2020 г., 18:38 Ilya Kasnacheev <[hidden email]
>> >:
>> > >
>> > >> Hello!
>> > >>
>> > >> Once you do that, I think it would make sense to remove autotools
>> > >> invocation from artifact build process. In the future we may choose
>> to
>> > >> remove autotools support entirely.
>> > >>
>> > >> Regards,
>> > >> --
>> > >> Ilya Kasnacheev
>> > >>
>> > >>
>> > >> вт, 23 июн. 2020 г. в 18:00, Petr Ivanov <[hidden email]>:
>> > >>
>> > >> > That host was down for some time and got up only recently.
>> > >> > Installed cmake there also.
>> > >> >
>> > >> >
>> > >> >
>> > >> > > On 23 Jun 2020, at 17:39, Ivan Daschinsky <[hidden email]>
>> > >> wrote:
>> > >> > >
>> > >> > > Petr, I see, that cmake is missing on aitc10_05 but it is in pool
>> > and
>> > >> > > trying to run build.
>> > >> > >
>> > >> > > [1] --
>> > >> > >
>> > >> >
>> > >>
>> >
>> https://ci.ignite.apache.org/buildConfiguration/IgniteTests24Java8_PlatformCPPCMakeLinux/5412025
>> > >> > >
>> > >> > > вт, 23 июн. 2020 г. в 17:33, Ivan Daschinsky <
>> [hidden email]>:
>> > >> > >
>> > >> > >>>> For the sake of discretion, I'd purpose to remove old suites
>> from
>> > >> Run
>> > >> > >> All and archive or pause them for some time before removal.
>> > >> > >> Agree, I was talking about removal from RunAll chain, complete
>> > >> removal
>> > >> > is
>> > >> > >> not necessary.
>> > >> > >> But after private discussion with Igor Sapego, me and he
>> decided to
>> > >> wait
>> > >> > >> for a week before exclusion of these suites from RunAll.
>> > >> > >>
>> > >> > >> вт, 23 июн. 2020 г. в 17:21, Petr Ivanov <[hidden email]>:
>> > >> > >>
>> > >> > >>> For the sake of discretion, I'd purpose to remove old suites
>> from
>> > >> Run
>> > >> > All
>> > >> > >>> and archive or pause them for some time before removal.
>> > >> > >>>
>> > >> > >>>
>> > >> > >>>> On 23 Jun 2020, at 13:26, Nikolay Izhikov <
>> [hidden email]>
>> > >> > wrote:
>> > >> > >>>>
>> > >> > >>>>> So, folks, is it ok to remove old suites from build chain
>> > >> > >>>>
>> > >> > >>>> +1 from me.
>> > >> > >>>>
>> > >> > >>>>
>> > >> > >>>>> 23 июня 2020 г., в 13:15, Ivan Daschinsky <
>> [hidden email]>
>> > >> > >>> написал(а):
>> > >> > >>>>>
>> > >> > >>>>> Well, new suites added to RunAll and all seems to be ok.
>> > >> > >>>>>
>> > >> > >>>>> I think it is time to remove old suites.
>> > >> > >>>>> WDYT?
>> > >> > >>>>>
>> > >> > >>>>> Also, I created patch with removal of autotools, but old
>> suites
>> > >> > should
>> > >> > >>> be
>> > >> > >>>>> removed first.
>> > >> > >>>>>
>> > >> > >>>>> So, folks, is it ok to remove old suites from build chain?
>> > >> > >>>>>
>> > >> > >>>>> вт, 23 июн. 2020 г. в 10:36, Ivan Daschinsky <
>> > [hidden email]
>> > >> >:
>> > >> > >>>>>
>> > >> > >>>>>> Ok, I changed agents requirements to builds and add them to
>> > >> runAll
>> > >> > >>>>>>
>> > >> > >>>>>> пн, 22 июн. 2020 г. в 22:39, Petr Ivanov <
>> [hidden email]
>> > >:
>> > >> > >>>>>>
>> > >> > >>>>>>> Cmake is installed on all agents (except 10 which is
>> currently
>> > >> down
>> > >> > >>> and
>> > >> > >>>>>>> will be updated later).
>> > >> > >>>>>>>
>> > >> > >>>>>>>
>> > >> > >>>>>>>> On 22 Jun 2020, at 21:03, Ivan Daschinsky <
>> > [hidden email]
>> > >> >
>> > >> > >>> wrote:
>> > >> > >>>>>>>>
>> > >> > >>>>>>>> Well, patch is merged. Thank a lot to Igor Sapego for
>> review.
>> > >> > >>>>>>>>
>> > >> > >>>>>>>> Peter, well, cmake now can be installed on all agent.
>> > >> > >>>>>>>>
>> > >> > >>>>>>>> I think it's time to add cmake suites to runAll and
>> exclude
>> > old
>> > >> > >>> suites
>> > >> > >>>>>>> from
>> > >> > >>>>>>>> it.
>> > >> > >>>>>>>>
>> > >> > >>>>>>>> Patch with removing autotools I Will submit in few days.
>> > >> > >>>>>>>>
>> > >> > >>>>>>>> пн, 22 июн. 2020 г., 20:25 Ivan Daschinsky <
>> > >> [hidden email]>:
>> > >> > >>>>>>>>
>> > >> > >>>>>>>>> Hi folks!
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>>> Good news -- I successfully created 2 CMake suites [1]
>> [2]
>> > and
>> > >> > they
>> > >> > >>>>>>> works
>> > >> > >>>>>>>>> as a charm.
>> > >> > >>>>>>>>> Many thanks to Ilya Kasnacheev for giving me permissions
>> and
>> > >> to
>> > >> > >>> Peter
>> > >> > >>>>>>>>> Ivanov for installing cmake and giving a whole agent for
>> > >> testing.
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>>> [1] --
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>
>> > >> > >>>
>> > >> >
>> > >>
>> >
>> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinuxClang&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
>> > >> > >>>>>>>>> [2] --
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>
>> > >> > >>>
>> > >> >
>> > >>
>> >
>> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinux&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>>> пн, 22 июн. 2020 г. в 12:03, Ilya Kasnacheev <
>> > >> > >>>>>>> [hidden email]>:
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>>>> Hello!
>> > >> > >>>>>>>>>>
>> > >> > >>>>>>>>>> I think you should contact Peter Ivanov if you want
>> > anything
>> > >> to
>> > >> > be
>> > >> > >>>>>>>>>> installed on agents.
>> > >> > >>>>>>>>>>
>> > >> > >>>>>>>>>> Regards,
>> > >> > >>>>>>>>>> --
>> > >> > >>>>>>>>>> Ilya Kasnacheev
>> > >> > >>>>>>>>>>
>> > >> > >>>>>>>>>>
>> > >> > >>>>>>>>>> пн, 22 июн. 2020 г. в 12:00, Ivan Daschinsky <
>> > >> > [hidden email]
>> > >> > >>>> :
>> > >> > >>>>>>>>>>
>> > >> > >>>>>>>>>>> Actually, I'm going to create 2 new suites based on
>> > existing
>> > >> > >>> ones:
>> > >> > >>>>>>>>>>> 1. Platform C++ CMake (Linux)
>> > >> > >>>>>>>>>>> 2. Platform C++ CMake (Linux Clang)
>> > >> > >>>>>>>>>>>
>> > >> > >>>>>>>>>>> Ilya, thank you very much. But, despite the fact, that
>> I
>> > >> have
>> > >> > >>>>>>>>>> permissions,
>> > >> > >>>>>>>>>>> it seems that it's impossible to install something
>> > (namely,
>> > >> > >>> CMake) on
>> > >> > >>>>>>>>>>> agents.
>> > >> > >>>>>>>>>>> How can I do this obviously essential task?
>> > >> > >>>>>>>>>>>
>> > >> > >>>>>>>>>>> пн, 22 июн. 2020 г. в 11:30, Ilya Kasnacheev <
>> > >> > >>>>>>> [hidden email]
>> > >> > >>>>>>>>>>> :
>> > >> > >>>>>>>>>>>
>> > >> > >>>>>>>>>>>> Hello!
>> > >> > >>>>>>>>>>>>
>> > >> > >>>>>>>>>>>> I have assigned roles on TC, you can now work on these
>> > >> builds.
>> > >> > >>>>>>>>>>>>
>> > >> > >>>>>>>>>>>> Please describe your changes on development list so
>> that
>> > >> > people
>> > >> > >>>>>>>>>>> understand
>> > >> > >>>>>>>>>>>> what is going on.
>> > >> > >>>>>>>>>>>>
>> > >> > >>>>>>>>>>>> Regards,
>> > >> > >>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>> Ilya Kasnacheev
>> > >> > >>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>
>> > >> > >>>>>>>>>>>> вс, 21 июн. 2020 г. в 17:35, Ivan Daschinsky <
>> > >> > >>> [hidden email]>:
>> > >> > >>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>> Hi folks.
>> > >> > >>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>> Patch is rigorously tested and with Igor Sapego help
>> it
>> > is
>> > >> > >>> possible
>> > >> > >>>>>>>>>> to
>> > >> > >>>>>>>>>>>>> build with cmake Ignite.C++  even on windows.
>> > >> > >>>>>>>>>>>>> But, it's required to make some TC suites and tune
>> them,
>> > >> in
>> > >> > >>> order
>> > >> > >>>>>>> to
>> > >> > >>>>>>>>>>>> patch
>> > >> > >>>>>>>>>>>>> be merged.
>> > >> > >>>>>>>>>>>>> Unfortunately, I am not a commiter and I doesn't have
>> > >> rights
>> > >> > to
>> > >> > >>>>>>>>>> create
>> > >> > >>>>>>>>>>>>> suites. Also, AFAIK, Igor currently is quite busy and
>> > >> doesn't
>> > >> > >>> have
>> > >> > >>>>>>>>>> much
>> > >> > >>>>>>>>>>>>> time to do this task by himself.
>> > >> > >>>>>>>>>>>>> So I need some help from community. Is it possible to
>> > >> grant
>> > >> > me
>> > >> > >>> some
>> > >> > >>>>>>>>>>>> rights
>> > >> > >>>>>>>>>>>>> to TC agents?
>> > >> > >>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>> ср, 3 июн. 2020 г. в 18:03, Nikolay Izhikov <
>> > >> > >>> [hidden email]>:
>> > >> > >>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>> Hello.
>> > >> > >>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>> I will do review of this changes.
>> > >> > >>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>> 1 июня 2020 г., в 13:21, Ivan Daschinsky <
>> > >> > >>> [hidden email]>
>> > >> > >>>>>>>>>>>>>> написал(а):
>> > >> > >>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>> Igor, could you please check my PR?
>> > >> > >>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:28, Ivan Daschinsky <
>> > >> > >>>>>>>>>> [hidden email]>:
>> > >> > >>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>> Thanks you all. Run patch (I've changed some code
>> > >> also) on
>> > >> > >>> TC
>> > >> > >>>>>>>>>> --
>> > >> > >>>>>>>>>>> all
>> > >> > >>>>>>>>>>>>> CPP
>> > >> > >>>>>>>>>>>>>>>> suites are green (GCC, CLang, Win64)
>> > >> > >>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:02, Zhenya Stanilovsky
>> > >> > >>>>>>>>>>>>>> <[hidden email]
>> > >> > >>>>>>>>>>>>>>>>> :
>> > >> > >>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>> Ivan besides documentation [1]
>> > >> > >>>>>>>>>>>>>>>>> -s no —  no works
>> > >> > >>>>>>>>>>>>>>>>> -- catch_system_errors =no — works properly well,
>> > >> tests
>> > >> > are
>> > >> > >>>>>>>>>>> passed.
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>> boost 1.65
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>> [1]
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>
>> > >> > >>>>>>>>>>>
>> > >> > >>>>>>>>>>
>> > >> > >>>>>>>
>> > >> > >>>
>> > >> >
>> > >>
>> >
>> https://www.boost.org/doc/libs/1_65_0/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/catch_system.html
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>> Hello!
>> > >> > >>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>> I didn't check tests since I don't develop AI
>> C++,
>> > >> > merely
>> > >> > >>>>>>>>>> use it
>> > >> > >>>>>>>>>>>> as
>> > >> > >>>>>>>>>>>>>> user.
>> > >> > >>>>>>>>>>>>>>>>>> That's where we should wait for Igor Sapego to
>> > check.
>> > >> > >>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>> Regards,
>> > >> > >>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>> Ilya Kasnacheev
>> > >> > >>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 12:20, Ivan Daschinsky <
>> > >> > >>>>>>>>>>> [hidden email]
>> > >> > >>>>>>>>>>>>>> :
>> > >> > >>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>> Ilya, thanks a lot! What about tests? I found
>> one
>> > >> flag
>> > >> > >>> that
>> > >> > >>>>>>>>>>> must
>> > >> > >>>>>>>>>>>> be
>> > >> > >>>>>>>>>>>>>>>>>>> supplied to boost.tests.
>> > >> > >>>>>>>>>>>>>>>>>>> This flag should fix JVM crash of C++ suites on
>> > >> Linux.
>> > >> > >>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>> Zhenya Stanilovsky and me have checked, that
>> > without
>> > >> > this
>> > >> > >>>>>>>>>> flag
>> > >> > >>>>>>>>>>>>> tests
>> > >> > >>>>>>>>>>>>>>>>> failed
>> > >> > >>>>>>>>>>>>>>>>>>> with SIGSEGV early (boost catch this signal
>> from
>> > >> jvm,
>> > >> > but
>> > >> > >>>>>>>>>> it is
>> > >> > >>>>>>>>>>>> ok
>> > >> > >>>>>>>>>>>>>> for
>> > >> > >>>>>>>>>>>>>>>>>>> jvm).
>> > >> > >>>>>>>>>>>>>>>>>>> Flag is -catch_system_errors=no. I added it to
>> > CTest
>> > >> > >>> runner.
>> > >> > >>>>>>>>>>> You
>> > >> > >>>>>>>>>>>>> can
>> > >> > >>>>>>>>>>>>>>>>>>> invoke it manually and using make test
>> ARGS="-V"
>> > >> > >>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 11:54, Ilya Kasnacheev <
>> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
>> > >> > >>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>> Hello!
>> > >> > >>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>> Looks good to me! But we probably also ask
>> Igor
>> > to
>> > >> > take
>> > >> > >>> a
>> > >> > >>>>>>>>>>> look.
>> > >> > >>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>> Compiled debug and release, without and with
>> > odbc,
>> > >> > >>> checked
>> > >> > >>>>>>>>>>>> running
>> > >> > >>>>>>>>>>>>>>>>> thick
>> > >> > >>>>>>>>>>>>>>>>>>>> node and ODBC connection on Linux.
>> > >> > >>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>> Regards,
>> > >> > >>>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
>> > >> > >>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>> чт, 28 мая 2020 г. в 17:31, Ivan Daschinsky <
>> > >> > >>>>>>>>>>>> [hidden email]
>> > >> > >>>>>>>>>>>>>>> :
>> > >> > >>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>> Ok, PR is ready
>> > >> > >>>>>>>>>>>>>>>>>>>>>
>> > >> https://issues.apache.org/jira/browse/IGNITE-13078
>> > >> > >>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>> Build tested on Mac OS X 10.15 and Ubuntu
>> 20.04
>> > >> with
>> > >> > >>> CMake
>> > >> > >>>>>>>>>>>> 3.17.2
>> > >> > >>>>>>>>>>>>>>>>> and
>> > >> > >>>>>>>>>>>>>>>>>>>> 3.6.1
>> > >> > >>>>>>>>>>>>>>>>>>>>> Unfortunately, I was not able to test on
>> > Windows,
>> > >> but
>> > >> > >>>>>>>>>>>> principally
>> > >> > >>>>>>>>>>>>>>>>> it
>> > >> > >>>>>>>>>>>>>>>>>>>> should
>> > >> > >>>>>>>>>>>>>>>>>>>>> works, but minor issues are probable.
>> > >> > >>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>> Instruction is attached in PR.
>> > >> > >>>>>>>>>>>>>>>>>>>>> Any use reports are welcomed!
>> > >> > >>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:51, Ivan Daschinsky <
>> > >> > >>>>>>>>>>>>> [hidden email]
>> > >> > >>>>>>>>>>>>>>>>>> :
>> > >> > >>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>> Stephen, looks great! I do mostly the same
>> > >> things in
>> > >> > >>> C++
>> > >> > >>>>>>>>>>> code.
>> > >> > >>>>>>>>>>>>>>>>> Thank
>> > >> > >>>>>>>>>>>>>>>>>>>> you!
>> > >> > >>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:33, Stephen
>> Darlington
>> > <
>> > >> > >>>>>>>>>>>>>>>>>>>>>> [hidden email] >:
>> > >> > >>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> Not sure if it’ll help, but I made some
>> > changes
>> > >> to
>> > >> > >>> get
>> > >> > >>>>>>>>>> it
>> > >> > >>>>>>>>>>>>>>>>> working
>> > >> > >>>>>>>>>>>>>>>>>>> on a
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> Mac with the current built system. There
>> may
>> > be
>> > >> > some
>> > >> > >>>>>>>>>> code
>> > >> > >>>>>>>>>>>> worth
>> > >> > >>>>>>>>>>>>>>>>>>>> taking.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> https://github.com/apache/ignite/pull/4872
>> <
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> https://github.com/apache/ignite/pull/4872
>> >
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> Regards,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> Stephen
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> On 26 May 2020, at 16:02, Ivan Daschinsky
>> <
>> > >> > >>>>>>>>>>>>>>>>> [hidden email] >
>> > >> > >>>>>>>>>>>>>>>>>>>>> wrote:
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I appreciate any help, thank you, Ilya.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Currently I have a small PR without ticket
>> > >> (link
>> > >> > in
>> > >> > >>>>>>>>>> first
>> > >> > >>>>>>>>>>>>>>>>>>> post),but
>> > >> > >>>>>>>>>>>>>>>>>>>> I
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> decided not to file a jira issue before
>> > >> > discussion.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Now I see, that this feature are of great
>> > >> interest
>> > >> > >>> to
>> > >> > >>>>>>>>>>>>>>>>> community.
>> > >> > >>>>>>>>>>>>>>>>>>> So
>> > >> > >>>>>>>>>>>>>>>>>>>> I
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> file
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> a ticket, test myself on my home laptop
>> > (ubuntu
>> > >> > >>> 20.04)
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> and add detailed instructions to
>> DEVNOTES.txt
>> > >> in a
>> > >> > >>> few
>> > >> > >>>>>>>>>>> days.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I would be happy if my someone can follow
>> the
>> > >> > >>>>>>>>>> instruction
>> > >> > >>>>>>>>>>>> and
>> > >> > >>>>>>>>>>>>>>>>>>> write
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> possible issues.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I will notify about status update in this
>> > >> thread
>> > >> > in
>> > >> > >>>>>>>>>> next
>> > >> > >>>>>>>>>>> few
>> > >> > >>>>>>>>>>>>>>>>> days.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Thank you all very much for support!
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 17:50, Ilya
>> Kasnacheev <
>> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Hello!
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> I will assist with checking on Linux if
>> you
>> > >> would
>> > >> > >>>>>>>>>>>> contribute
>> > >> > >>>>>>>>>>>>>>>>> a
>> > >> > >>>>>>>>>>>>>>>>>>>> patch.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Please start with a ticket (or even an
>> IEP
>> > >> > maybe?)
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Regards,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:47, Ivan
>> Daschinsky
>> > <
>> > >> > >>>>>>>>>>>>>>>>> [hidden email]
>> > >> > >>>>>>>>>>>>>>>>>>>> :
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Guys, I will certainly thoroughly test
>> my
>> > fix
>> > >> > not
>> > >> > >>>>>>>>>> only
>> > >> > >>>>>>>>>>>>>>>>> unices,
>> > >> > >>>>>>>>>>>>>>>>>>> but
>> > >> > >>>>>>>>>>>>>>>>>>>>> on
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> windows too.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> And I will describe it very thoroughly.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> When I was C++ developer (more than 10
>> > years
>> > >> > >>> ago), I
>> > >> > >>>>>>>>>>> have
>> > >> > >>>>>>>>>>>>>>>>> not
>> > >> > >>>>>>>>>>>>>>>>>>> any
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> trouble
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> at all with CMake and Visual Studio
>> 2005.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Everything works and works good.
>> Moreover,
>> > >> you
>> > >> > can
>> > >> > >>>>>>>>>> build
>> > >> > >>>>>>>>>>>>>>>>> with
>> > >> > >>>>>>>>>>>>>>>>>>>> NMake,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> msbuild and generate solutions for
>> > >> development.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> I suppose, for CI purposes, using NMake
>> is
>> > a
>> > >> way
>> > >> > >>>>>>>>>> better,
>> > >> > >>>>>>>>>>>>>>>>> than
>> > >> > >>>>>>>>>>>>>>>>>>> use
>> > >> > >>>>>>>>>>>>>>>>>>>> vs
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> solutions.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:42, Nikolay
>> > Izhikov <
>> > >> > >>>>>>>>>>>>>>>>>>> [hidden email]
>> > >> > >>>>>>>>>>>>>>>>>>>>> :
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, Igor.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Nikolay, removing support for a
>> certain
>> > >> build
>> > >> > >>>>>>>>>> system
>> > >> > >>>>>>>>>>> is
>> > >> > >>>>>>>>>>>> a
>> > >> > >>>>>>>>>>>>>>>>>>>> breaking
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> change.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> No, it’s not.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Why do you think so?
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Development environment and build
>> system
>> > is
>> > >> a
>> > >> > >>>>>>>>>> subject
>> > >> > >>>>>>>>>>> to
>> > >> > >>>>>>>>>>>>>>>>> change
>> > >> > >>>>>>>>>>>>>>>>>>>> in
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> any
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> project.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> We can drop or add support of any build
>> > >> system
>> > >> > >>> any
>> > >> > >>>>>>>>>> time
>> > >> > >>>>>>>>>>>> we
>> > >> > >>>>>>>>>>>>>>>>>>> want.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 26 мая 2020 г., в 16:35, Ilya
>> Kasnacheev
>> > <
>> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> написал(а):
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello!
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't see why we can't get rid of
>> > >> autotools
>> > >> > >>> in a
>> > >> > >>>>>>>>>>> minor
>> > >> > >>>>>>>>>>>>>>>>>>>> release,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> provided
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> that cmake actually works. Removing
>> > native
>> > >> VS
>> > >> > >>>>>>>>>> support
>> > >> > >>>>>>>>>>>> may
>> > >> > >>>>>>>>>>>>>>>>> be a
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> different
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> thing.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Build system and precise set of
>> > >> dependencies
>> > >> > is
>> > >> > >>>>>>>>>> not a
>> > >> > >>>>>>>>>>>>>>>>> part of
>> > >> > >>>>>>>>>>>>>>>>>>>>> public
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> API
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> in
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> my opinion.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:02, Igor
>> Sapego <
>> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great!
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Let's start with creating a TC suite
>> for
>> > >> it.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The only concern I have is that it is
>> > one
>> > >> > more
>> > >> > >>>>>>>>>> build
>> > >> > >>>>>>>>>>>>>>>>> system
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support. Should we get rid of
>> > >> autotools in
>> > >> > >>> 3.0?
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Igor
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 2:44 PM
>> Alexey
>> > >> > >>> Kukushkin <
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [hidden email] >
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1. I recently completed a cross-IDE
>> > (MS
>> > >> > >>> Visual
>> > >> > >>>>>>>>>>>> Studio &
>> > >> > >>>>>>>>>>>>>>>>>>>>> GCC/GDB)
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Ignite
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C++ project and CMake in Ignite C++
>> > would
>> > >> > save
>> > >> > >>>>>>>>>> me a
>> > >> > >>>>>>>>>>>> day
>> > >> > >>>>>>>>>>>>>>>>> of
>> > >> > >>>>>>>>>>>>>>>>>>>>> effort.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 12:09, Pavel
>> > >> Tupitsyn <
>> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 12:02 PM
>> > Zhenya
>> > >> > >>>>>>>>>> Stanilovsky
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < [hidden email] >
>> wrote:
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ivan huge +1 with your proposal.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I had some problems with odbc
>> tests
>> > >> > building
>> > >> > >>>>>>>>>> too,
>> > >> > >>>>>>>>>>>>>>>>> looks
>> > >> > >>>>>>>>>>>>>>>>>>> like
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> cmake
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> will
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make it more easy.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Igniters.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d like to discuss porting build
>> > >> process
>> > >> > >>> of
>> > >> > >>>>>>>>>>>>>>>>> Ignite.C++.
>> > >> > >>>>>>>>>>>>>>>>>>> I
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> think
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there is time to change it.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Motivation*
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, it is hard to build
>> > >> > Ignite.C++.
>> > >> > >>>>>>>>>>>> Different
>> > >> > >>>>>>>>>>>>>>>>>>> build
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> process
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> windows and linux, lack of
>> building
>> > >> > support
>> > >> > >>> on
>> > >> > >>>>>>>>>> Mac
>> > >> > >>>>>>>>>>>> OS
>> > >> > >>>>>>>>>>>>>>>>> X
>> > >> > >>>>>>>>>>>>>>>>>>>> (quite
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> popular
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> among developers), absolutely not
>> IDE
>> > >> > >>> support,
>> > >> > >>>>>>>>>>>> except
>> > >> > >>>>>>>>>>>>>>>>>>>> windows
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> and
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> only
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio is supported.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Suggestion*
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d suggest to migrate to CMake
>> > build
>> > >> > >>> system.
>> > >> > >>>>>>>>>> It
>> > >> > >>>>>>>>>>> is
>> > >> > >>>>>>>>>>>>>>>>> very
>> > >> > >>>>>>>>>>>>>>>>>>>>>>> popular
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> among
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> open source projects, and in
>> Apache
>> > >> > Software
>> > >> > >>>>>>>>>>>>>>>>> Foundation
>> > >> > >>>>>>>>>>>>>>>>>>> too.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Notable
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user:
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache Mesos, Apache Zookeeper (C
>> > >> client
>> > >> > >>> offers
>> > >> > >>>>>>>>>>>> CMake
>> > >> > >>>>>>>>>>>>>>>>> as
>> > >> > >>>>>>>>>>>>>>>>>>> an
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> alternative
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> autoconf and only option on
>> windows),
>> > >> > Apache
>> > >> > >>>>>>>>>> Kafka
>> > >> > >>>>>>>>>>>>>>>>>>>>> (librdkafka -
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> C/C++
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> client), Apache Thrift. Popular
>> > >> > >>> column-oriented
>> > >> > >>>>>>>>>>>>>>>>> database
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> ClickHouse
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uses CMake.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMake is widely supported in many
>> > >> IDE’s
>> > >> > on
>> > >> > >>>>>>>>>>> various
>> > >> > >>>>>>>>>>>>>>>>>>>> platforms,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> notably
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio, CLion, Xcode,
>> > QtCreator,
>> > >> > >>>>>>>>>> KDevelop.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Current status*
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, the most of work is
>> done
>> > >> (see
>> > >> > >>> [1])
>> > >> > >>>>>>>>>> and
>> > >> > >>>>>>>>>>>>>>>>> tested
>> > >> > >>>>>>>>>>>>>>>>>>> on
>> > >> > >>>>>>>>>>>>>>>>>>>>> Mac
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> OS X
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.15 (some C++ porting). All
>> tests
>> > are
>> > >> > run
>> > >> > >>>>>>>>>>> without
>> > >> > >>>>>>>>>>>>>>>>> any
>> > >> > >>>>>>>>>>>>>>>>>>>> flaws,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> odbc (unixodbc), ssl, thin and
>> thick
>> > >> > client,
>> > >> > >>>>>>>>>>>>>>>>> installation,
>> > >> > >>>>>>>>>>>>>>>>>>>> IDE
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> integration
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (CLion). Next steps is to test
>> linux
>> > >> and
>> > >> > >>>>>>>>>> windows.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But full migration isn’t possible
>> > >> without
>> > >> > >>>>>>>>>>> agreement
>> > >> > >>>>>>>>>>>>>>>>> and
>> > >> > >>>>>>>>>>>>>>>>>>>> help
>> > >> > >>>>>>>>>>>>>>>>>>>>> of
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> community. Even if most of all you
>> > >> agree,
>> > >> > >>>>>>>>>>> migration
>> > >> > >>>>>>>>>>>>>>>>>>> requires
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> additional
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> efforts in TC agents tuning and
>> so on
>> > >> > (event
>> > >> > >>>>>>>>>>> though
>> > >> > >>>>>>>>>>>>>>>>> test
>> > >> > >>>>>>>>>>>>>>>>>>>>> running
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> fully
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> automated by CMake CTest).
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lets discuss my proposition and
>> > idea.
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] -
>> > >> > >>>>>>>>>>> https://github.com/apache/ignite/pull/7845
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>> --
>> > >> > >>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>>>
>> > >> > >>>>>>>>>>>>
>> > >> > >>>>>>>>>>>
>> > >> > >>>>>>>>>>>
>> > >> > >>>>>>>>>>> --
>> > >> > >>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>>>
>> > >> > >>>>>>>>>>
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>>> --
>> > >> > >>>>>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>>>>
>> > >> > >>>>>>>
>> > >> > >>>>>>>
>> > >> > >>>>>>
>> > >> > >>>>>> --
>> > >> > >>>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>>>
>> > >> > >>>>>
>> > >> > >>>>>
>> > >> > >>>>> --
>> > >> > >>>>> Sincerely yours, Ivan Daschinskiy
>> > >> > >>>>
>> > >> > >>>
>> > >> > >>>
>> > >> > >>
>> > >> > >> --
>> > >> > >> Sincerely yours, Ivan Daschinskiy
>> > >> > >>
>> > >> > >
>> > >> > >
>> > >> > > --
>> > >> > > Sincerely yours, Ivan Daschinskiy
>> > >> >
>> > >> >
>> > >>
>> > >
>> >
>> > --
>> > Sincerely yours, Ivan Daschinskiy
>> >
>>
>

--
Sincerely yours, Ivan Daschinskiy

[Pavel Tupitsyn]

Ivan,

Thank you for such a detailed explanation!
I am sorry if I upset you.

I just wanted to make sure that instructions are correct,
and I simply missed those 2 dots. Now it all works perfectly.

Pavel

On Wed, Jul 1, 2020 at 8:09 AM Ivan Daschinsky <[hidden email]> wrote:

> Let me explain with details.
>
> CMake is unusual from other build systems, that it can separate build root
> and source root. Moreover, it is strongly discouraged to mix them.
> Benefits:
> 1. You can have many build with different options using same source.
> 2. You can build project with different toolchain using same source.
> 3. You can build project for different platforms using same source
> (cross-compilation, docker, etc.)
>
> Common patter is:
> 1. Create build root.
> 2. Change current dir to build root.
> 3. Invoke cmake in build root, pointing to source root.
>
> Usually build root is subdirectory, of source root. So, as it mentioned in
> DEVNOTES.txt, usual steps are:
> 1. mdkir <build_root> (usually named cmake-build-<build-type>[-<toolchain>]
> 2. cd <build_root>
> 3. cmake [-DOPTION1=VALUE1 -DOPTION2=VALUE2 ... ] .. (NB! This double dots
> are important, they points to source root)
>
> This is so common, that you can hardly find any tutorial about CMake in
> google without thes double dots. This is basic of CMake.
>
> So if you think that we should explain for C++ developers basics of the
> most common build system (CMake is really very popular and nowadays usually
> must for new projects),
> we can add this to DEVNOTES.txt. But I think that is not necessary at all.
> For example, we don't explain basics of maven, though it is not obvious at
> all as it seems to us, Ignite developers.
>
> ср, 1 июл. 2020 г. в 06:18, Ivan Daschinsky <[hidden email]>:
>
> > Pavel, pay attention to two dots at the end. All build files should stay
> > at current dir, and cmake-build-release is supposed to be a build root.
> And
> > this directory is added to gitignore. Actually, build directory can be
> > everywhere, but you should pass path to dir, that contains root
> > CMakeLists.txt. Usually it is parent directory of cmake-build-release, so
> > double dot is used. It is so common pattern of usage and I simply cannot
> > understand why it is misleading.
> >
> > ср, 1 июл. 2020 г., 0:48 Pavel Tupitsyn <[hidden email]>:
> >
> >> This is awesome, thanks everyone!
> >>
> >> I've tried following the instructions, and the following two steps seem
> to
> >> be misleading:
> >> * mkdir cmake-build-[release|debug]
> >> * cd ./cmake-build-[release|debug]
> >>
> >> When I run cmake in the newly created cmake-build-debug dir, I get:
> >> CMake Error: The source directory
> >> "/home/pavel/w/ignite/modules/platforms/cpp/cmake-build-release" does
> not
> >> appear to contain CMakeLists.txt.
> >>
> >> If I skip those 2 steps, I can build Ignite C++ and run tests with ctest
> >> on
> >> Ubuntu 20.04.
> >>
> >>
> >> Another observation: building the project produces untracked git files.
> >> Should we update gitignore accordingly?
> >>
> >>
> >> Thanks,
> >> Pavel
> >>
> >>
> >> On Tue, Jun 30, 2020 at 9:33 PM Ivan Daschinsky <[hidden email]>
> >> wrote:
> >>
> >> > Ok, CMake now is the only option to build C++ on non-windows
> platforms.
> >> > Autotools is removed from master.
> >> >
> >> > Many thanks to Igor Sapego, Zhenya Stanilovsky, Nickolay Izhikov and
> >> Ilya
> >> > Kasnacheev for review, testing and suggestions.
> >> >
> >> > вт, 23 июн. 2020 г. в 18:42, Ivan Daschinsky <[hidden email]>:
> >> >
> >> > > I suppose, that removal of autotools from source code is a question
> >> of a
> >> > > week. There is no need to support it.
> >> > >
> >> > > вт, 23 июн. 2020 г., 18:38 Ilya Kasnacheev <
> [hidden email]
> >> >:
> >> > >
> >> > >> Hello!
> >> > >>
> >> > >> Once you do that, I think it would make sense to remove autotools
> >> > >> invocation from artifact build process. In the future we may choose
> >> to
> >> > >> remove autotools support entirely.
> >> > >>
> >> > >> Regards,
> >> > >> --
> >> > >> Ilya Kasnacheev
> >> > >>
> >> > >>
> >> > >> вт, 23 июн. 2020 г. в 18:00, Petr Ivanov <[hidden email]>:
> >> > >>
> >> > >> > That host was down for some time and got up only recently.
> >> > >> > Installed cmake there also.
> >> > >> >
> >> > >> >
> >> > >> >
> >> > >> > > On 23 Jun 2020, at 17:39, Ivan Daschinsky <[hidden email]
> >
> >> > >> wrote:
> >> > >> > >
> >> > >> > > Petr, I see, that cmake is missing on aitc10_05 but it is in
> pool
> >> > and
> >> > >> > > trying to run build.
> >> > >> > >
> >> > >> > > [1] --
> >> > >> > >
> >> > >> >
> >> > >>
> >> >
> >>
> https://ci.ignite.apache.org/buildConfiguration/IgniteTests24Java8_PlatformCPPCMakeLinux/5412025
> >> > >> > >
> >> > >> > > вт, 23 июн. 2020 г. в 17:33, Ivan Daschinsky <
> >> [hidden email]>:
> >> > >> > >
> >> > >> > >>>> For the sake of discretion, I'd purpose to remove old suites
> >> from
> >> > >> Run
> >> > >> > >> All and archive or pause them for some time before removal.
> >> > >> > >> Agree, I was talking about removal from RunAll chain, complete
> >> > >> removal
> >> > >> > is
> >> > >> > >> not necessary.
> >> > >> > >> But after private discussion with Igor Sapego, me and he
> >> decided to
> >> > >> wait
> >> > >> > >> for a week before exclusion of these suites from RunAll.
> >> > >> > >>
> >> > >> > >> вт, 23 июн. 2020 г. в 17:21, Petr Ivanov <[hidden email]
> >:
> >> > >> > >>
> >> > >> > >>> For the sake of discretion, I'd purpose to remove old suites
> >> from
> >> > >> Run
> >> > >> > All
> >> > >> > >>> and archive or pause them for some time before removal.
> >> > >> > >>>
> >> > >> > >>>
> >> > >> > >>>> On 23 Jun 2020, at 13:26, Nikolay Izhikov <
> >> [hidden email]>
> >> > >> > wrote:
> >> > >> > >>>>
> >> > >> > >>>>> So, folks, is it ok to remove old suites from build chain
> >> > >> > >>>>
> >> > >> > >>>> +1 from me.
> >> > >> > >>>>
> >> > >> > >>>>
> >> > >> > >>>>> 23 июня 2020 г., в 13:15, Ivan Daschinsky <
> >> [hidden email]>
> >> > >> > >>> написал(а):
> >> > >> > >>>>>
> >> > >> > >>>>> Well, new suites added to RunAll and all seems to be ok.
> >> > >> > >>>>>
> >> > >> > >>>>> I think it is time to remove old suites.
> >> > >> > >>>>> WDYT?
> >> > >> > >>>>>
> >> > >> > >>>>> Also, I created patch with removal of autotools, but old
> >> suites
> >> > >> > should
> >> > >> > >>> be
> >> > >> > >>>>> removed first.
> >> > >> > >>>>>
> >> > >> > >>>>> So, folks, is it ok to remove old suites from build chain?
> >> > >> > >>>>>
> >> > >> > >>>>> вт, 23 июн. 2020 г. в 10:36, Ivan Daschinsky <
> >> > [hidden email]
> >> > >> >:
> >> > >> > >>>>>
> >> > >> > >>>>>> Ok, I changed agents requirements to builds and add them
> to
> >> > >> runAll
> >> > >> > >>>>>>
> >> > >> > >>>>>> пн, 22 июн. 2020 г. в 22:39, Petr Ivanov <
> >> [hidden email]
> >> > >:
> >> > >> > >>>>>>
> >> > >> > >>>>>>> Cmake is installed on all agents (except 10 which is
> >> currently
> >> > >> down
> >> > >> > >>> and
> >> > >> > >>>>>>> will be updated later).
> >> > >> > >>>>>>>
> >> > >> > >>>>>>>
> >> > >> > >>>>>>>> On 22 Jun 2020, at 21:03, Ivan Daschinsky <
> >> > [hidden email]
> >> > >> >
> >> > >> > >>> wrote:
> >> > >> > >>>>>>>>
> >> > >> > >>>>>>>> Well, patch is merged. Thank a lot to Igor Sapego for
> >> review.
> >> > >> > >>>>>>>>
> >> > >> > >>>>>>>> Peter, well, cmake now can be installed on all agent.
> >> > >> > >>>>>>>>
> >> > >> > >>>>>>>> I think it's time to add cmake suites to runAll and
> >> exclude
> >> > old
> >> > >> > >>> suites
> >> > >> > >>>>>>> from
> >> > >> > >>>>>>>> it.
> >> > >> > >>>>>>>>
> >> > >> > >>>>>>>> Patch with removing autotools I Will submit in few days.
> >> > >> > >>>>>>>>
> >> > >> > >>>>>>>> пн, 22 июн. 2020 г., 20:25 Ivan Daschinsky <
> >> > >> [hidden email]>:
> >> > >> > >>>>>>>>
> >> > >> > >>>>>>>>> Hi folks!
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>>> Good news -- I successfully created 2 CMake suites [1]
> >> [2]
> >> > and
> >> > >> > they
> >> > >> > >>>>>>> works
> >> > >> > >>>>>>>>> as a charm.
> >> > >> > >>>>>>>>> Many thanks to Ilya Kasnacheev for giving me
> permissions
> >> and
> >> > >> to
> >> > >> > >>> Peter
> >> > >> > >>>>>>>>> Ivanov for installing cmake and giving a whole agent
> for
> >> > >> testing.
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>>> [1] --
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>
> >> > >> > >>>
> >> > >> >
> >> > >>
> >> >
> >>
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinuxClang&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> >> > >> > >>>>>>>>> [2] --
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>
> >> > >> > >>>
> >> > >> >
> >> > >>
> >> >
> >>
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinux&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>>> пн, 22 июн. 2020 г. в 12:03, Ilya Kasnacheev <
> >> > >> > >>>>>>> [hidden email]>:
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>>>> Hello!
> >> > >> > >>>>>>>>>>
> >> > >> > >>>>>>>>>> I think you should contact Peter Ivanov if you want
> >> > anything
> >> > >> to
> >> > >> > be
> >> > >> > >>>>>>>>>> installed on agents.
> >> > >> > >>>>>>>>>>
> >> > >> > >>>>>>>>>> Regards,
> >> > >> > >>>>>>>>>> --
> >> > >> > >>>>>>>>>> Ilya Kasnacheev
> >> > >> > >>>>>>>>>>
> >> > >> > >>>>>>>>>>
> >> > >> > >>>>>>>>>> пн, 22 июн. 2020 г. в 12:00, Ivan Daschinsky <
> >> > >> > [hidden email]
> >> > >> > >>>> :
> >> > >> > >>>>>>>>>>
> >> > >> > >>>>>>>>>>> Actually, I'm going to create 2 new suites based on
> >> > existing
> >> > >> > >>> ones:
> >> > >> > >>>>>>>>>>> 1. Platform C++ CMake (Linux)
> >> > >> > >>>>>>>>>>> 2. Platform C++ CMake (Linux Clang)
> >> > >> > >>>>>>>>>>>
> >> > >> > >>>>>>>>>>> Ilya, thank you very much. But, despite the fact,
> that
> >> I
> >> > >> have
> >> > >> > >>>>>>>>>> permissions,
> >> > >> > >>>>>>>>>>> it seems that it's impossible to install something
> >> > (namely,
> >> > >> > >>> CMake) on
> >> > >> > >>>>>>>>>>> agents.
> >> > >> > >>>>>>>>>>> How can I do this obviously essential task?
> >> > >> > >>>>>>>>>>>
> >> > >> > >>>>>>>>>>> пн, 22 июн. 2020 г. в 11:30, Ilya Kasnacheev <
> >> > >> > >>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>
> >> > >> > >>>>>>>>>>>> Hello!
> >> > >> > >>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>> I have assigned roles on TC, you can now work on
> these
> >> > >> builds.
> >> > >> > >>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>> Please describe your changes on development list so
> >> that
> >> > >> > people
> >> > >> > >>>>>>>>>>> understand
> >> > >> > >>>>>>>>>>>> what is going on.
> >> > >> > >>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>> Regards,
> >> > >> > >>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>> Ilya Kasnacheev
> >> > >> > >>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>> вс, 21 июн. 2020 г. в 17:35, Ivan Daschinsky <
> >> > >> > >>> [hidden email]>:
> >> > >> > >>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>> Hi folks.
> >> > >> > >>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>> Patch is rigorously tested and with Igor Sapego
> help
> >> it
> >> > is
> >> > >> > >>> possible
> >> > >> > >>>>>>>>>> to
> >> > >> > >>>>>>>>>>>>> build with cmake Ignite.C++  even on windows.
> >> > >> > >>>>>>>>>>>>> But, it's required to make some TC suites and tune
> >> them,
> >> > >> in
> >> > >> > >>> order
> >> > >> > >>>>>>> to
> >> > >> > >>>>>>>>>>>> patch
> >> > >> > >>>>>>>>>>>>> be merged.
> >> > >> > >>>>>>>>>>>>> Unfortunately, I am not a commiter and I doesn't
> have
> >> > >> rights
> >> > >> > to
> >> > >> > >>>>>>>>>> create
> >> > >> > >>>>>>>>>>>>> suites. Also, AFAIK, Igor currently is quite busy
> and
> >> > >> doesn't
> >> > >> > >>> have
> >> > >> > >>>>>>>>>> much
> >> > >> > >>>>>>>>>>>>> time to do this task by himself.
> >> > >> > >>>>>>>>>>>>> So I need some help from community. Is it possible
> to
> >> > >> grant
> >> > >> > me
> >> > >> > >>> some
> >> > >> > >>>>>>>>>>>> rights
> >> > >> > >>>>>>>>>>>>> to TC agents?
> >> > >> > >>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>> ср, 3 июн. 2020 г. в 18:03, Nikolay Izhikov <
> >> > >> > >>> [hidden email]>:
> >> > >> > >>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>> Hello.
> >> > >> > >>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>> I will do review of this changes.
> >> > >> > >>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>> 1 июня 2020 г., в 13:21, Ivan Daschinsky <
> >> > >> > >>> [hidden email]>
> >> > >> > >>>>>>>>>>>>>> написал(а):
> >> > >> > >>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>> Igor, could you please check my PR?
> >> > >> > >>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:28, Ivan Daschinsky <
> >> > >> > >>>>>>>>>> [hidden email]>:
> >> > >> > >>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>> Thanks you all. Run patch (I've changed some
> code
> >> > >> also) on
> >> > >> > >>> TC
> >> > >> > >>>>>>>>>> --
> >> > >> > >>>>>>>>>>> all
> >> > >> > >>>>>>>>>>>>> CPP
> >> > >> > >>>>>>>>>>>>>>>> suites are green (GCC, CLang, Win64)
> >> > >> > >>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:02, Zhenya Stanilovsky
> >> > >> > >>>>>>>>>>>>>> <[hidden email]
> >> > >> > >>>>>>>>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>> Ivan besides documentation [1]
> >> > >> > >>>>>>>>>>>>>>>>> -s no —  no works
> >> > >> > >>>>>>>>>>>>>>>>> -- catch_system_errors =no — works properly
> well,
> >> > >> tests
> >> > >> > are
> >> > >> > >>>>>>>>>>> passed.
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>> boost 1.65
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>> [1]
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>
> >> > >> > >>>>>>>>>>
> >> > >> > >>>>>>>
> >> > >> > >>>
> >> > >> >
> >> > >>
> >> >
> >>
> https://www.boost.org/doc/libs/1_65_0/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/catch_system.html
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>> Hello!
> >> > >> > >>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>> I didn't check tests since I don't develop AI
> >> C++,
> >> > >> > merely
> >> > >> > >>>>>>>>>> use it
> >> > >> > >>>>>>>>>>>> as
> >> > >> > >>>>>>>>>>>>>> user.
> >> > >> > >>>>>>>>>>>>>>>>>> That's where we should wait for Igor Sapego to
> >> > check.
> >> > >> > >>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>> Regards,
> >> > >> > >>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> >> > >> > >>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 12:20, Ivan Daschinsky <
> >> > >> > >>>>>>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>> Ilya, thanks a lot! What about tests? I found
> >> one
> >> > >> flag
> >> > >> > >>> that
> >> > >> > >>>>>>>>>>> must
> >> > >> > >>>>>>>>>>>> be
> >> > >> > >>>>>>>>>>>>>>>>>>> supplied to boost.tests.
> >> > >> > >>>>>>>>>>>>>>>>>>> This flag should fix JVM crash of C++ suites
> on
> >> > >> Linux.
> >> > >> > >>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>> Zhenya Stanilovsky and me have checked, that
> >> > without
> >> > >> > this
> >> > >> > >>>>>>>>>> flag
> >> > >> > >>>>>>>>>>>>> tests
> >> > >> > >>>>>>>>>>>>>>>>> failed
> >> > >> > >>>>>>>>>>>>>>>>>>> with SIGSEGV early (boost catch this signal
> >> from
> >> > >> jvm,
> >> > >> > but
> >> > >> > >>>>>>>>>> it is
> >> > >> > >>>>>>>>>>>> ok
> >> > >> > >>>>>>>>>>>>>> for
> >> > >> > >>>>>>>>>>>>>>>>>>> jvm).
> >> > >> > >>>>>>>>>>>>>>>>>>> Flag is -catch_system_errors=no. I added it
> to
> >> > CTest
> >> > >> > >>> runner.
> >> > >> > >>>>>>>>>>> You
> >> > >> > >>>>>>>>>>>>> can
> >> > >> > >>>>>>>>>>>>>>>>>>> invoke it manually and using make test
> >> ARGS="-V"
> >> > >> > >>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 11:54, Ilya Kasnacheev <
> >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> >> > >> > >>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>> Hello!
> >> > >> > >>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>> Looks good to me! But we probably also ask
> >> Igor
> >> > to
> >> > >> > take
> >> > >> > >>> a
> >> > >> > >>>>>>>>>>> look.
> >> > >> > >>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>> Compiled debug and release, without and with
> >> > odbc,
> >> > >> > >>> checked
> >> > >> > >>>>>>>>>>>> running
> >> > >> > >>>>>>>>>>>>>>>>> thick
> >> > >> > >>>>>>>>>>>>>>>>>>>> node and ODBC connection on Linux.
> >> > >> > >>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>> Regards,
> >> > >> > >>>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> >> > >> > >>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>> чт, 28 мая 2020 г. в 17:31, Ivan Daschinsky
> <
> >> > >> > >>>>>>>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>> Ok, PR is ready
> >> > >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >> https://issues.apache.org/jira/browse/IGNITE-13078
> >> > >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>> Build tested on Mac OS X 10.15 and Ubuntu
> >> 20.04
> >> > >> with
> >> > >> > >>> CMake
> >> > >> > >>>>>>>>>>>> 3.17.2
> >> > >> > >>>>>>>>>>>>>>>>> and
> >> > >> > >>>>>>>>>>>>>>>>>>>> 3.6.1
> >> > >> > >>>>>>>>>>>>>>>>>>>>> Unfortunately, I was not able to test on
> >> > Windows,
> >> > >> but
> >> > >> > >>>>>>>>>>>> principally
> >> > >> > >>>>>>>>>>>>>>>>> it
> >> > >> > >>>>>>>>>>>>>>>>>>>> should
> >> > >> > >>>>>>>>>>>>>>>>>>>>> works, but minor issues are probable.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>> Instruction is attached in PR.
> >> > >> > >>>>>>>>>>>>>>>>>>>>> Any use reports are welcomed!
> >> > >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:51, Ivan
> Daschinsky <
> >> > >> > >>>>>>>>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>> Stephen, looks great! I do mostly the same
> >> > >> things in
> >> > >> > >>> C++
> >> > >> > >>>>>>>>>>> code.
> >> > >> > >>>>>>>>>>>>>>>>> Thank
> >> > >> > >>>>>>>>>>>>>>>>>>>> you!
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:33, Stephen
> >> Darlington
> >> > <
> >> > >> > >>>>>>>>>>>>>>>>>>>>>> [hidden email] >:
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Not sure if it’ll help, but I made some
> >> > changes
> >> > >> to
> >> > >> > >>> get
> >> > >> > >>>>>>>>>> it
> >> > >> > >>>>>>>>>>>>>>>>> working
> >> > >> > >>>>>>>>>>>>>>>>>>> on a
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Mac with the current built system. There
> >> may
> >> > be
> >> > >> > some
> >> > >> > >>>>>>>>>> code
> >> > >> > >>>>>>>>>>>> worth
> >> > >> > >>>>>>>>>>>>>>>>>>>> taking.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> https://github.com/apache/ignite/pull/4872
> >> <
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> https://github.com/apache/ignite/pull/4872
> >> >
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Regards,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Stephen
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> On 26 May 2020, at 16:02, Ivan
> Daschinsky
> >> <
> >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >
> >> > >> > >>>>>>>>>>>>>>>>>>>>> wrote:
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I appreciate any help, thank you, Ilya.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Currently I have a small PR without
> ticket
> >> > >> (link
> >> > >> > in
> >> > >> > >>>>>>>>>> first
> >> > >> > >>>>>>>>>>>>>>>>>>> post),but
> >> > >> > >>>>>>>>>>>>>>>>>>>> I
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> decided not to file a jira issue before
> >> > >> > discussion.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Now I see, that this feature are of
> great
> >> > >> interest
> >> > >> > >>> to
> >> > >> > >>>>>>>>>>>>>>>>> community.
> >> > >> > >>>>>>>>>>>>>>>>>>> So
> >> > >> > >>>>>>>>>>>>>>>>>>>> I
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> file
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> a ticket, test myself on my home laptop
> >> > (ubuntu
> >> > >> > >>> 20.04)
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> and add detailed instructions to
> >> DEVNOTES.txt
> >> > >> in a
> >> > >> > >>> few
> >> > >> > >>>>>>>>>>> days.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I would be happy if my someone can
> follow
> >> the
> >> > >> > >>>>>>>>>> instruction
> >> > >> > >>>>>>>>>>>> and
> >> > >> > >>>>>>>>>>>>>>>>>>> write
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> possible issues.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I will notify about status update in
> this
> >> > >> thread
> >> > >> > in
> >> > >> > >>>>>>>>>> next
> >> > >> > >>>>>>>>>>> few
> >> > >> > >>>>>>>>>>>>>>>>> days.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Thank you all very much for support!
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 17:50, Ilya
> >> Kasnacheev <
> >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> I will assist with checking on Linux if
> >> you
> >> > >> would
> >> > >> > >>>>>>>>>>>> contribute
> >> > >> > >>>>>>>>>>>>>>>>> a
> >> > >> > >>>>>>>>>>>>>>>>>>>> patch.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Please start with a ticket (or even an
> >> IEP
> >> > >> > maybe?)
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:47, Ivan
> >> Daschinsky
> >> > <
> >> > >> > >>>>>>>>>>>>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Guys, I will certainly thoroughly test
> >> my
> >> > fix
> >> > >> > not
> >> > >> > >>>>>>>>>> only
> >> > >> > >>>>>>>>>>>>>>>>> unices,
> >> > >> > >>>>>>>>>>>>>>>>>>> but
> >> > >> > >>>>>>>>>>>>>>>>>>>>> on
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> windows too.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> And I will describe it very
> thoroughly.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> When I was C++ developer (more than 10
> >> > years
> >> > >> > >>> ago), I
> >> > >> > >>>>>>>>>>> have
> >> > >> > >>>>>>>>>>>>>>>>> not
> >> > >> > >>>>>>>>>>>>>>>>>>> any
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> trouble
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> at all with CMake and Visual Studio
> >> 2005.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Everything works and works good.
> >> Moreover,
> >> > >> you
> >> > >> > can
> >> > >> > >>>>>>>>>> build
> >> > >> > >>>>>>>>>>>>>>>>> with
> >> > >> > >>>>>>>>>>>>>>>>>>>> NMake,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> msbuild and generate solutions for
> >> > >> development.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> I suppose, for CI purposes, using
> NMake
> >> is
> >> > a
> >> > >> way
> >> > >> > >>>>>>>>>> better,
> >> > >> > >>>>>>>>>>>>>>>>> than
> >> > >> > >>>>>>>>>>>>>>>>>>> use
> >> > >> > >>>>>>>>>>>>>>>>>>>> vs
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> solutions.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:42, Nikolay
> >> > Izhikov <
> >> > >> > >>>>>>>>>>>>>>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>>>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, Igor.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Nikolay, removing support for a
> >> certain
> >> > >> build
> >> > >> > >>>>>>>>>> system
> >> > >> > >>>>>>>>>>> is
> >> > >> > >>>>>>>>>>>> a
> >> > >> > >>>>>>>>>>>>>>>>>>>> breaking
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> change.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> No, it’s not.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Why do you think so?
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Development environment and build
> >> system
> >> > is
> >> > >> a
> >> > >> > >>>>>>>>>> subject
> >> > >> > >>>>>>>>>>> to
> >> > >> > >>>>>>>>>>>>>>>>> change
> >> > >> > >>>>>>>>>>>>>>>>>>>> in
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> any
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> project.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> We can drop or add support of any
> build
> >> > >> system
> >> > >> > >>> any
> >> > >> > >>>>>>>>>> time
> >> > >> > >>>>>>>>>>>> we
> >> > >> > >>>>>>>>>>>>>>>>>>> want.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 26 мая 2020 г., в 16:35, Ilya
> >> Kasnacheev
> >> > <
> >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> написал(а):
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't see why we can't get rid of
> >> > >> autotools
> >> > >> > >>> in a
> >> > >> > >>>>>>>>>>> minor
> >> > >> > >>>>>>>>>>>>>>>>>>>> release,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> provided
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> that cmake actually works. Removing
> >> > native
> >> > >> VS
> >> > >> > >>>>>>>>>> support
> >> > >> > >>>>>>>>>>>> may
> >> > >> > >>>>>>>>>>>>>>>>> be a
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> different
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> thing.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Build system and precise set of
> >> > >> dependencies
> >> > >> > is
> >> > >> > >>>>>>>>>> not a
> >> > >> > >>>>>>>>>>>>>>>>> part of
> >> > >> > >>>>>>>>>>>>>>>>>>>>> public
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> API
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> in
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> my opinion.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:02, Igor
> >> Sapego <
> >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great!
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Let's start with creating a TC
> suite
> >> for
> >> > >> it.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The only concern I have is that it
> is
> >> > one
> >> > >> > more
> >> > >> > >>>>>>>>>> build
> >> > >> > >>>>>>>>>>>>>>>>> system
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support. Should we get rid of
> >> > >> autotools in
> >> > >> > >>> 3.0?
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Igor
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 2:44 PM
> >> Alexey
> >> > >> > >>> Kukushkin <
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [hidden email] >
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1. I recently completed a
> cross-IDE
> >> > (MS
> >> > >> > >>> Visual
> >> > >> > >>>>>>>>>>>> Studio &
> >> > >> > >>>>>>>>>>>>>>>>>>>>> GCC/GDB)
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Ignite
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C++ project and CMake in Ignite
> C++
> >> > would
> >> > >> > save
> >> > >> > >>>>>>>>>> me a
> >> > >> > >>>>>>>>>>>> day
> >> > >> > >>>>>>>>>>>>>>>>> of
> >> > >> > >>>>>>>>>>>>>>>>>>>>> effort.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 12:09, Pavel
> >> > >> Tupitsyn <
> >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 12:02 PM
> >> > Zhenya
> >> > >> > >>>>>>>>>> Stanilovsky
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < [hidden email] >
> >> wrote:
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ivan huge +1 with your proposal.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I had some problems with odbc
> >> tests
> >> > >> > building
> >> > >> > >>>>>>>>>> too,
> >> > >> > >>>>>>>>>>>>>>>>> looks
> >> > >> > >>>>>>>>>>>>>>>>>>> like
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> cmake
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> will
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make it more easy.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Igniters.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d like to discuss porting
> build
> >> > >> process
> >> > >> > >>> of
> >> > >> > >>>>>>>>>>>>>>>>> Ignite.C++.
> >> > >> > >>>>>>>>>>>>>>>>>>> I
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> think
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there is time to change it.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Motivation*
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, it is hard to build
> >> > >> > Ignite.C++.
> >> > >> > >>>>>>>>>>>> Different
> >> > >> > >>>>>>>>>>>>>>>>>>> build
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> process
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> windows and linux, lack of
> >> building
> >> > >> > support
> >> > >> > >>> on
> >> > >> > >>>>>>>>>> Mac
> >> > >> > >>>>>>>>>>>> OS
> >> > >> > >>>>>>>>>>>>>>>>> X
> >> > >> > >>>>>>>>>>>>>>>>>>>> (quite
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> popular
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> among developers), absolutely
> not
> >> IDE
> >> > >> > >>> support,
> >> > >> > >>>>>>>>>>>> except
> >> > >> > >>>>>>>>>>>>>>>>>>>> windows
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> and
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> only
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio is supported.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Suggestion*
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d suggest to migrate to CMake
> >> > build
> >> > >> > >>> system.
> >> > >> > >>>>>>>>>> It
> >> > >> > >>>>>>>>>>> is
> >> > >> > >>>>>>>>>>>>>>>>> very
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>> popular
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> among
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> open source projects, and in
> >> Apache
> >> > >> > Software
> >> > >> > >>>>>>>>>>>>>>>>> Foundation
> >> > >> > >>>>>>>>>>>>>>>>>>> too.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Notable
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user:
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache Mesos, Apache Zookeeper
> (C
> >> > >> client
> >> > >> > >>> offers
> >> > >> > >>>>>>>>>>>> CMake
> >> > >> > >>>>>>>>>>>>>>>>> as
> >> > >> > >>>>>>>>>>>>>>>>>>> an
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> alternative
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> autoconf and only option on
> >> windows),
> >> > >> > Apache
> >> > >> > >>>>>>>>>> Kafka
> >> > >> > >>>>>>>>>>>>>>>>>>>>> (librdkafka -
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> C/C++
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> client), Apache Thrift. Popular
> >> > >> > >>> column-oriented
> >> > >> > >>>>>>>>>>>>>>>>> database
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> ClickHouse
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uses CMake.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMake is widely supported in
> many
> >> > >> IDE’s
> >> > >> > on
> >> > >> > >>>>>>>>>>> various
> >> > >> > >>>>>>>>>>>>>>>>>>>> platforms,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> notably
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio, CLion, Xcode,
> >> > QtCreator,
> >> > >> > >>>>>>>>>> KDevelop.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Current status*
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, the most of work is
> >> done
> >> > >> (see
> >> > >> > >>> [1])
> >> > >> > >>>>>>>>>> and
> >> > >> > >>>>>>>>>>>>>>>>> tested
> >> > >> > >>>>>>>>>>>>>>>>>>> on
> >> > >> > >>>>>>>>>>>>>>>>>>>>> Mac
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> OS X
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.15 (some C++ porting). All
> >> tests
> >> > are
> >> > >> > run
> >> > >> > >>>>>>>>>>> without
> >> > >> > >>>>>>>>>>>>>>>>> any
> >> > >> > >>>>>>>>>>>>>>>>>>>> flaws,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> odbc (unixodbc), ssl, thin and
> >> thick
> >> > >> > client,
> >> > >> > >>>>>>>>>>>>>>>>> installation,
> >> > >> > >>>>>>>>>>>>>>>>>>>> IDE
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> integration
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (CLion). Next steps is to test
> >> linux
> >> > >> and
> >> > >> > >>>>>>>>>> windows.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But full migration isn’t
> possible
> >> > >> without
> >> > >> > >>>>>>>>>>> agreement
> >> > >> > >>>>>>>>>>>>>>>>> and
> >> > >> > >>>>>>>>>>>>>>>>>>>> help
> >> > >> > >>>>>>>>>>>>>>>>>>>>> of
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> community. Even if most of all
> you
> >> > >> agree,
> >> > >> > >>>>>>>>>>> migration
> >> > >> > >>>>>>>>>>>>>>>>>>> requires
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> additional
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> efforts in TC agents tuning and
> >> so on
> >> > >> > (event
> >> > >> > >>>>>>>>>>> though
> >> > >> > >>>>>>>>>>>>>>>>> test
> >> > >> > >>>>>>>>>>>>>>>>>>>>> running
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> fully
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> automated by CMake CTest).
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lets discuss my proposition and
> >> > idea.
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] -
> >> > >> > >>>>>>>>>>> https://github.com/apache/ignite/pull/7845
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>> --
> >> > >> > >>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>>
> >> > >> > >>>>>>>>>>>
> >> > >> > >>>>>>>>>>>
> >> > >> > >>>>>>>>>>> --
> >> > >> > >>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>>>
> >> > >> > >>>>>>>>>>
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>>> --
> >> > >> > >>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>>>>
> >> > >> > >>>>>>>
> >> > >> > >>>>>>>
> >> > >> > >>>>>>
> >> > >> > >>>>>> --
> >> > >> > >>>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>>>
> >> > >> > >>>>>
> >> > >> > >>>>>
> >> > >> > >>>>> --
> >> > >> > >>>>> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>>>
> >> > >> > >>>
> >> > >> > >>>
> >> > >> > >>
> >> > >> > >> --
> >> > >> > >> Sincerely yours, Ivan Daschinskiy
> >> > >> > >>
> >> > >> > >
> >> > >> > >
> >> > >> > > --
> >> > >> > > Sincerely yours, Ivan Daschinskiy
> >> > >> >
> >> > >> >
> >> > >>
> >> > >
> >> >
> >> > --
> >> > Sincerely yours, Ivan Daschinskiy
> >> >
> >>
> >
>
> --
> Sincerely yours, Ivan Daschinskiy
>

[Ivan Daschinsky]

No, I am really curious if this instruction complete or not. Actually, Ilya
Kasnacheev asked me about the same thing as you. And may be instruction is
not so obvious and should be reworked. You know, that developers are not
usually great in writing documentation.

ср, 1 июл. 2020 г., 10:37 Pavel Tupitsyn <[hidden email]>:

> Ivan,
>
> Thank you for such a detailed explanation!
> I am sorry if I upset you.
>
> I just wanted to make sure that instructions are correct,
> and I simply missed those 2 dots. Now it all works perfectly.
>
> Pavel
>
> On Wed, Jul 1, 2020 at 8:09 AM Ivan Daschinsky <[hidden email]>
> wrote:
>
> > Let me explain with details.
> >
> > CMake is unusual from other build systems, that it can separate build
> root
> > and source root. Moreover, it is strongly discouraged to mix them.
> > Benefits:
> > 1. You can have many build with different options using same source.
> > 2. You can build project with different toolchain using same source.
> > 3. You can build project for different platforms using same source
> > (cross-compilation, docker, etc.)
> >
> > Common patter is:
> > 1. Create build root.
> > 2. Change current dir to build root.
> > 3. Invoke cmake in build root, pointing to source root.
> >
> > Usually build root is subdirectory, of source root. So, as it mentioned
> in
> > DEVNOTES.txt, usual steps are:
> > 1. mdkir <build_root> (usually named
> cmake-build-<build-type>[-<toolchain>]
> > 2. cd <build_root>
> > 3. cmake [-DOPTION1=VALUE1 -DOPTION2=VALUE2 ... ] .. (NB! This double
> dots
> > are important, they points to source root)
> >
> > This is so common, that you can hardly find any tutorial about CMake in
> > google without thes double dots. This is basic of CMake.
> >
> > So if you think that we should explain for C++ developers basics of the
> > most common build system (CMake is really very popular and nowadays
> usually
> > must for new projects),
> > we can add this to DEVNOTES.txt. But I think that is not necessary at
> all.
> > For example, we don't explain basics of maven, though it is not obvious
> at
> > all as it seems to us, Ignite developers.
> >
> > ср, 1 июл. 2020 г. в 06:18, Ivan Daschinsky <[hidden email]>:
> >
> > > Pavel, pay attention to two dots at the end. All build files should
> stay
> > > at current dir, and cmake-build-release is supposed to be a build root.
> > And
> > > this directory is added to gitignore. Actually, build directory can be
> > > everywhere, but you should pass path to dir, that contains root
> > > CMakeLists.txt. Usually it is parent directory of cmake-build-release,
> so
> > > double dot is used. It is so common pattern of usage and I simply
> cannot
> > > understand why it is misleading.
> > >
> > > ср, 1 июл. 2020 г., 0:48 Pavel Tupitsyn <[hidden email]>:
> > >
> > >> This is awesome, thanks everyone!
> > >>
> > >> I've tried following the instructions, and the following two steps
> seem
> > to
> > >> be misleading:
> > >> * mkdir cmake-build-[release|debug]
> > >> * cd ./cmake-build-[release|debug]
> > >>
> > >> When I run cmake in the newly created cmake-build-debug dir, I get:
> > >> CMake Error: The source directory
> > >> "/home/pavel/w/ignite/modules/platforms/cpp/cmake-build-release" does
> > not
> > >> appear to contain CMakeLists.txt.
> > >>
> > >> If I skip those 2 steps, I can build Ignite C++ and run tests with
> ctest
> > >> on
> > >> Ubuntu 20.04.
> > >>
> > >>
> > >> Another observation: building the project produces untracked git
> files.
> > >> Should we update gitignore accordingly?
> > >>
> > >>
> > >> Thanks,
> > >> Pavel
> > >>
> > >>
> > >> On Tue, Jun 30, 2020 at 9:33 PM Ivan Daschinsky <[hidden email]>
> > >> wrote:
> > >>
> > >> > Ok, CMake now is the only option to build C++ on non-windows
> > platforms.
> > >> > Autotools is removed from master.
> > >> >
> > >> > Many thanks to Igor Sapego, Zhenya Stanilovsky, Nickolay Izhikov and
> > >> Ilya
> > >> > Kasnacheev for review, testing and suggestions.
> > >> >
> > >> > вт, 23 июн. 2020 г. в 18:42, Ivan Daschinsky <[hidden email]>:
> > >> >
> > >> > > I suppose, that removal of autotools from source code is a
> question
> > >> of a
> > >> > > week. There is no need to support it.
> > >> > >
> > >> > > вт, 23 июн. 2020 г., 18:38 Ilya Kasnacheev <
> > [hidden email]
> > >> >:
> > >> > >
> > >> > >> Hello!
> > >> > >>
> > >> > >> Once you do that, I think it would make sense to remove autotools
> > >> > >> invocation from artifact build process. In the future we may
> choose
> > >> to
> > >> > >> remove autotools support entirely.
> > >> > >>
> > >> > >> Regards,
> > >> > >> --
> > >> > >> Ilya Kasnacheev
> > >> > >>
> > >> > >>
> > >> > >> вт, 23 июн. 2020 г. в 18:00, Petr Ivanov <[hidden email]>:
> > >> > >>
> > >> > >> > That host was down for some time and got up only recently.
> > >> > >> > Installed cmake there also.
> > >> > >> >
> > >> > >> >
> > >> > >> >
> > >> > >> > > On 23 Jun 2020, at 17:39, Ivan Daschinsky <
> [hidden email]
> > >
> > >> > >> wrote:
> > >> > >> > >
> > >> > >> > > Petr, I see, that cmake is missing on aitc10_05 but it is in
> > pool
> > >> > and
> > >> > >> > > trying to run build.
> > >> > >> > >
> > >> > >> > > [1] --
> > >> > >> > >
> > >> > >> >
> > >> > >>
> > >> >
> > >>
> >
> https://ci.ignite.apache.org/buildConfiguration/IgniteTests24Java8_PlatformCPPCMakeLinux/5412025
> > >> > >> > >
> > >> > >> > > вт, 23 июн. 2020 г. в 17:33, Ivan Daschinsky <
> > >> [hidden email]>:
> > >> > >> > >
> > >> > >> > >>>> For the sake of discretion, I'd purpose to remove old
> suites
> > >> from
> > >> > >> Run
> > >> > >> > >> All and archive or pause them for some time before removal.
> > >> > >> > >> Agree, I was talking about removal from RunAll chain,
> complete
> > >> > >> removal
> > >> > >> > is
> > >> > >> > >> not necessary.
> > >> > >> > >> But after private discussion with Igor Sapego, me and he
> > >> decided to
> > >> > >> wait
> > >> > >> > >> for a week before exclusion of these suites from RunAll.
> > >> > >> > >>
> > >> > >> > >> вт, 23 июн. 2020 г. в 17:21, Petr Ivanov <
> [hidden email]
> > >:
> > >> > >> > >>
> > >> > >> > >>> For the sake of discretion, I'd purpose to remove old
> suites
> > >> from
> > >> > >> Run
> > >> > >> > All
> > >> > >> > >>> and archive or pause them for some time before removal.
> > >> > >> > >>>
> > >> > >> > >>>
> > >> > >> > >>>> On 23 Jun 2020, at 13:26, Nikolay Izhikov <
> > >> [hidden email]>
> > >> > >> > wrote:
> > >> > >> > >>>>
> > >> > >> > >>>>> So, folks, is it ok to remove old suites from build chain
> > >> > >> > >>>>
> > >> > >> > >>>> +1 from me.
> > >> > >> > >>>>
> > >> > >> > >>>>
> > >> > >> > >>>>> 23 июня 2020 г., в 13:15, Ivan Daschinsky <
> > >> [hidden email]>
> > >> > >> > >>> написал(а):
> > >> > >> > >>>>>
> > >> > >> > >>>>> Well, new suites added to RunAll and all seems to be ok.
> > >> > >> > >>>>>
> > >> > >> > >>>>> I think it is time to remove old suites.
> > >> > >> > >>>>> WDYT?
> > >> > >> > >>>>>
> > >> > >> > >>>>> Also, I created patch with removal of autotools, but old
> > >> suites
> > >> > >> > should
> > >> > >> > >>> be
> > >> > >> > >>>>> removed first.
> > >> > >> > >>>>>
> > >> > >> > >>>>> So, folks, is it ok to remove old suites from build
> chain?
> > >> > >> > >>>>>
> > >> > >> > >>>>> вт, 23 июн. 2020 г. в 10:36, Ivan Daschinsky <
> > >> > [hidden email]
> > >> > >> >:
> > >> > >> > >>>>>
> > >> > >> > >>>>>> Ok, I changed agents requirements to builds and add them
> > to
> > >> > >> runAll
> > >> > >> > >>>>>>
> > >> > >> > >>>>>> пн, 22 июн. 2020 г. в 22:39, Petr Ivanov <
> > >> [hidden email]
> > >> > >:
> > >> > >> > >>>>>>
> > >> > >> > >>>>>>> Cmake is installed on all agents (except 10 which is
> > >> currently
> > >> > >> down
> > >> > >> > >>> and
> > >> > >> > >>>>>>> will be updated later).
> > >> > >> > >>>>>>>
> > >> > >> > >>>>>>>
> > >> > >> > >>>>>>>> On 22 Jun 2020, at 21:03, Ivan Daschinsky <
> > >> > [hidden email]
> > >> > >> >
> > >> > >> > >>> wrote:
> > >> > >> > >>>>>>>>
> > >> > >> > >>>>>>>> Well, patch is merged. Thank a lot to Igor Sapego for
> > >> review.
> > >> > >> > >>>>>>>>
> > >> > >> > >>>>>>>> Peter, well, cmake now can be installed on all agent.
> > >> > >> > >>>>>>>>
> > >> > >> > >>>>>>>> I think it's time to add cmake suites to runAll and
> > >> exclude
> > >> > old
> > >> > >> > >>> suites
> > >> > >> > >>>>>>> from
> > >> > >> > >>>>>>>> it.
> > >> > >> > >>>>>>>>
> > >> > >> > >>>>>>>> Patch with removing autotools I Will submit in few
> days.
> > >> > >> > >>>>>>>>
> > >> > >> > >>>>>>>> пн, 22 июн. 2020 г., 20:25 Ivan Daschinsky <
> > >> > >> [hidden email]>:
> > >> > >> > >>>>>>>>
> > >> > >> > >>>>>>>>> Hi folks!
> > >> > >> > >>>>>>>>>
> > >> > >> > >>>>>>>>> Good news -- I successfully created 2 CMake suites
> [1]
> > >> [2]
> > >> > and
> > >> > >> > they
> > >> > >> > >>>>>>> works
> > >> > >> > >>>>>>>>> as a charm.
> > >> > >> > >>>>>>>>> Many thanks to Ilya Kasnacheev for giving me
> > permissions
> > >> and
> > >> > >> to
> > >> > >> > >>> Peter
> > >> > >> > >>>>>>>>> Ivanov for installing cmake and giving a whole agent
> > for
> > >> > >> testing.
> > >> > >> > >>>>>>>>>
> > >> > >> > >>>>>>>>> [1] --
> > >> > >> > >>>>>>>>>
> > >> > >> > >>>>>>>
> > >> > >> > >>>
> > >> > >> >
> > >> > >>
> > >> >
> > >>
> >
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinuxClang&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> > >> > >> > >>>>>>>>> [2] --
> > >> > >> > >>>>>>>>>
> > >> > >> > >>>>>>>
> > >> > >> > >>>
> > >> > >> >
> > >> > >>
> > >> >
> > >>
> >
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinux&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> > >> > >> > >>>>>>>>>
> > >> > >> > >>>>>>>>> пн, 22 июн. 2020 г. в 12:03, Ilya Kasnacheev <
> > >> > >> > >>>>>>> [hidden email]>:
> > >> > >> > >>>>>>>>>
> > >> > >> > >>>>>>>>>> Hello!
> > >> > >> > >>>>>>>>>>
> > >> > >> > >>>>>>>>>> I think you should contact Peter Ivanov if you want
> > >> > anything
> > >> > >> to
> > >> > >> > be
> > >> > >> > >>>>>>>>>> installed on agents.
> > >> > >> > >>>>>>>>>>
> > >> > >> > >>>>>>>>>> Regards,
> > >> > >> > >>>>>>>>>> --
> > >> > >> > >>>>>>>>>> Ilya Kasnacheev
> > >> > >> > >>>>>>>>>>
> > >> > >> > >>>>>>>>>>
> > >> > >> > >>>>>>>>>> пн, 22 июн. 2020 г. в 12:00, Ivan Daschinsky <
> > >> > >> > [hidden email]
> > >> > >> > >>>> :
> > >> > >> > >>>>>>>>>>
> > >> > >> > >>>>>>>>>>> Actually, I'm going to create 2 new suites based on
> > >> > existing
> > >> > >> > >>> ones:
> > >> > >> > >>>>>>>>>>> 1. Platform C++ CMake (Linux)
> > >> > >> > >>>>>>>>>>> 2. Platform C++ CMake (Linux Clang)
> > >> > >> > >>>>>>>>>>>
> > >> > >> > >>>>>>>>>>> Ilya, thank you very much. But, despite the fact,
> > that
> > >> I
> > >> > >> have
> > >> > >> > >>>>>>>>>> permissions,
> > >> > >> > >>>>>>>>>>> it seems that it's impossible to install something
> > >> > (namely,
> > >> > >> > >>> CMake) on
> > >> > >> > >>>>>>>>>>> agents.
> > >> > >> > >>>>>>>>>>> How can I do this obviously essential task?
> > >> > >> > >>>>>>>>>>>
> > >> > >> > >>>>>>>>>>> пн, 22 июн. 2020 г. в 11:30, Ilya Kasnacheev <
> > >> > >> > >>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>> Hello!
> > >> > >> > >>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>> I have assigned roles on TC, you can now work on
> > these
> > >> > >> builds.
> > >> > >> > >>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>> Please describe your changes on development list
> so
> > >> that
> > >> > >> > people
> > >> > >> > >>>>>>>>>>> understand
> > >> > >> > >>>>>>>>>>>> what is going on.
> > >> > >> > >>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>> Regards,
> > >> > >> > >>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>> Ilya Kasnacheev
> > >> > >> > >>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>> вс, 21 июн. 2020 г. в 17:35, Ivan Daschinsky <
> > >> > >> > >>> [hidden email]>:
> > >> > >> > >>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>> Hi folks.
> > >> > >> > >>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>> Patch is rigorously tested and with Igor Sapego
> > help
> > >> it
> > >> > is
> > >> > >> > >>> possible
> > >> > >> > >>>>>>>>>> to
> > >> > >> > >>>>>>>>>>>>> build with cmake Ignite.C++  even on windows.
> > >> > >> > >>>>>>>>>>>>> But, it's required to make some TC suites and
> tune
> > >> them,
> > >> > >> in
> > >> > >> > >>> order
> > >> > >> > >>>>>>> to
> > >> > >> > >>>>>>>>>>>> patch
> > >> > >> > >>>>>>>>>>>>> be merged.
> > >> > >> > >>>>>>>>>>>>> Unfortunately, I am not a commiter and I doesn't
> > have
> > >> > >> rights
> > >> > >> > to
> > >> > >> > >>>>>>>>>> create
> > >> > >> > >>>>>>>>>>>>> suites. Also, AFAIK, Igor currently is quite busy
> > and
> > >> > >> doesn't
> > >> > >> > >>> have
> > >> > >> > >>>>>>>>>> much
> > >> > >> > >>>>>>>>>>>>> time to do this task by himself.
> > >> > >> > >>>>>>>>>>>>> So I need some help from community. Is it
> possible
> > to
> > >> > >> grant
> > >> > >> > me
> > >> > >> > >>> some
> > >> > >> > >>>>>>>>>>>> rights
> > >> > >> > >>>>>>>>>>>>> to TC agents?
> > >> > >> > >>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>> ср, 3 июн. 2020 г. в 18:03, Nikolay Izhikov <
> > >> > >> > >>> [hidden email]>:
> > >> > >> > >>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>> Hello.
> > >> > >> > >>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>> I will do review of this changes.
> > >> > >> > >>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>> 1 июня 2020 г., в 13:21, Ivan Daschinsky <
> > >> > >> > >>> [hidden email]>
> > >> > >> > >>>>>>>>>>>>>> написал(а):
> > >> > >> > >>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>> Igor, could you please check my PR?
> > >> > >> > >>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:28, Ivan Daschinsky <
> > >> > >> > >>>>>>>>>> [hidden email]>:
> > >> > >> > >>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>> Thanks you all. Run patch (I've changed some
> > code
> > >> > >> also) on
> > >> > >> > >>> TC
> > >> > >> > >>>>>>>>>> --
> > >> > >> > >>>>>>>>>>> all
> > >> > >> > >>>>>>>>>>>>> CPP
> > >> > >> > >>>>>>>>>>>>>>>> suites are green (GCC, CLang, Win64)
> > >> > >> > >>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:02, Zhenya Stanilovsky
> > >> > >> > >>>>>>>>>>>>>> <[hidden email]
> > >> > >> > >>>>>>>>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>> Ivan besides documentation [1]
> > >> > >> > >>>>>>>>>>>>>>>>> -s no —  no works
> > >> > >> > >>>>>>>>>>>>>>>>> -- catch_system_errors =no — works properly
> > well,
> > >> > >> tests
> > >> > >> > are
> > >> > >> > >>>>>>>>>>> passed.
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>> boost 1.65
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>> [1]
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>
> > >> > >> > >>>>>>>>>>
> > >> > >> > >>>>>>>
> > >> > >> > >>>
> > >> > >> >
> > >> > >>
> > >> >
> > >>
> >
> https://www.boost.org/doc/libs/1_65_0/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/catch_system.html
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>> Hello!
> > >> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>> I didn't check tests since I don't develop
> AI
> > >> C++,
> > >> > >> > merely
> > >> > >> > >>>>>>>>>> use it
> > >> > >> > >>>>>>>>>>>> as
> > >> > >> > >>>>>>>>>>>>>> user.
> > >> > >> > >>>>>>>>>>>>>>>>>> That's where we should wait for Igor Sapego
> to
> > >> > check.
> > >> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>> Regards,
> > >> > >> > >>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > >> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 12:20, Ivan Daschinsky
> <
> > >> > >> > >>>>>>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>> Ilya, thanks a lot! What about tests? I
> found
> > >> one
> > >> > >> flag
> > >> > >> > >>> that
> > >> > >> > >>>>>>>>>>> must
> > >> > >> > >>>>>>>>>>>> be
> > >> > >> > >>>>>>>>>>>>>>>>>>> supplied to boost.tests.
> > >> > >> > >>>>>>>>>>>>>>>>>>> This flag should fix JVM crash of C++
> suites
> > on
> > >> > >> Linux.
> > >> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>> Zhenya Stanilovsky and me have checked,
> that
> > >> > without
> > >> > >> > this
> > >> > >> > >>>>>>>>>> flag
> > >> > >> > >>>>>>>>>>>>> tests
> > >> > >> > >>>>>>>>>>>>>>>>> failed
> > >> > >> > >>>>>>>>>>>>>>>>>>> with SIGSEGV early (boost catch this signal
> > >> from
> > >> > >> jvm,
> > >> > >> > but
> > >> > >> > >>>>>>>>>> it is
> > >> > >> > >>>>>>>>>>>> ok
> > >> > >> > >>>>>>>>>>>>>> for
> > >> > >> > >>>>>>>>>>>>>>>>>>> jvm).
> > >> > >> > >>>>>>>>>>>>>>>>>>> Flag is -catch_system_errors=no. I added it
> > to
> > >> > CTest
> > >> > >> > >>> runner.
> > >> > >> > >>>>>>>>>>> You
> > >> > >> > >>>>>>>>>>>>> can
> > >> > >> > >>>>>>>>>>>>>>>>>>> invoke it manually and using make test
> > >> ARGS="-V"
> > >> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 11:54, Ilya
> Kasnacheev <
> > >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> > >> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>> Hello!
> > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>> Looks good to me! But we probably also ask
> > >> Igor
> > >> > to
> > >> > >> > take
> > >> > >> > >>> a
> > >> > >> > >>>>>>>>>>> look.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>> Compiled debug and release, without and
> with
> > >> > odbc,
> > >> > >> > >>> checked
> > >> > >> > >>>>>>>>>>>> running
> > >> > >> > >>>>>>>>>>>>>>>>> thick
> > >> > >> > >>>>>>>>>>>>>>>>>>>> node and ODBC connection on Linux.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>> Regards,
> > >> > >> > >>>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>> чт, 28 мая 2020 г. в 17:31, Ivan
> Daschinsky
> > <
> > >> > >> > >>>>>>>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> Ok, PR is ready
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >> https://issues.apache.org/jira/browse/IGNITE-13078
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> Build tested on Mac OS X 10.15 and Ubuntu
> > >> 20.04
> > >> > >> with
> > >> > >> > >>> CMake
> > >> > >> > >>>>>>>>>>>> 3.17.2
> > >> > >> > >>>>>>>>>>>>>>>>> and
> > >> > >> > >>>>>>>>>>>>>>>>>>>> 3.6.1
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> Unfortunately, I was not able to test on
> > >> > Windows,
> > >> > >> but
> > >> > >> > >>>>>>>>>>>> principally
> > >> > >> > >>>>>>>>>>>>>>>>> it
> > >> > >> > >>>>>>>>>>>>>>>>>>>> should
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> works, but minor issues are probable.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> Instruction is attached in PR.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> Any use reports are welcomed!
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:51, Ivan
> > Daschinsky <
> > >> > >> > >>>>>>>>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>> Stephen, looks great! I do mostly the
> same
> > >> > >> things in
> > >> > >> > >>> C++
> > >> > >> > >>>>>>>>>>> code.
> > >> > >> > >>>>>>>>>>>>>>>>> Thank
> > >> > >> > >>>>>>>>>>>>>>>>>>>> you!
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:33, Stephen
> > >> Darlington
> > >> > <
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>> [hidden email] >:
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Not sure if it’ll help, but I made some
> > >> > changes
> > >> > >> to
> > >> > >> > >>> get
> > >> > >> > >>>>>>>>>> it
> > >> > >> > >>>>>>>>>>>>>>>>> working
> > >> > >> > >>>>>>>>>>>>>>>>>>> on a
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Mac with the current built system.
> There
> > >> may
> > >> > be
> > >> > >> > some
> > >> > >> > >>>>>>>>>> code
> > >> > >> > >>>>>>>>>>>> worth
> > >> > >> > >>>>>>>>>>>>>>>>>>>> taking.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > https://github.com/apache/ignite/pull/4872
> > >> <
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > https://github.com/apache/ignite/pull/4872
> > >> >
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Regards,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Stephen
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> On 26 May 2020, at 16:02, Ivan
> > Daschinsky
> > >> <
> > >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> wrote:
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I appreciate any help, thank you,
> Ilya.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Currently I have a small PR without
> > ticket
> > >> > >> (link
> > >> > >> > in
> > >> > >> > >>>>>>>>>> first
> > >> > >> > >>>>>>>>>>>>>>>>>>> post),but
> > >> > >> > >>>>>>>>>>>>>>>>>>>> I
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> decided not to file a jira issue
> before
> > >> > >> > discussion.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Now I see, that this feature are of
> > great
> > >> > >> interest
> > >> > >> > >>> to
> > >> > >> > >>>>>>>>>>>>>>>>> community.
> > >> > >> > >>>>>>>>>>>>>>>>>>> So
> > >> > >> > >>>>>>>>>>>>>>>>>>>> I
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> file
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> a ticket, test myself on my home
> laptop
> > >> > (ubuntu
> > >> > >> > >>> 20.04)
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> and add detailed instructions to
> > >> DEVNOTES.txt
> > >> > >> in a
> > >> > >> > >>> few
> > >> > >> > >>>>>>>>>>> days.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I would be happy if my someone can
> > follow
> > >> the
> > >> > >> > >>>>>>>>>> instruction
> > >> > >> > >>>>>>>>>>>> and
> > >> > >> > >>>>>>>>>>>>>>>>>>> write
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> possible issues.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I will notify about status update in
> > this
> > >> > >> thread
> > >> > >> > in
> > >> > >> > >>>>>>>>>> next
> > >> > >> > >>>>>>>>>>> few
> > >> > >> > >>>>>>>>>>>>>>>>> days.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Thank you all very much for support!
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 17:50, Ilya
> > >> Kasnacheev <
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> I will assist with checking on Linux
> if
> > >> you
> > >> > >> would
> > >> > >> > >>>>>>>>>>>> contribute
> > >> > >> > >>>>>>>>>>>>>>>>> a
> > >> > >> > >>>>>>>>>>>>>>>>>>>> patch.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Please start with a ticket (or even
> an
> > >> IEP
> > >> > >> > maybe?)
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:47, Ivan
> > >> Daschinsky
> > >> > <
> > >> > >> > >>>>>>>>>>>>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Guys, I will certainly thoroughly
> test
> > >> my
> > >> > fix
> > >> > >> > not
> > >> > >> > >>>>>>>>>> only
> > >> > >> > >>>>>>>>>>>>>>>>> unices,
> > >> > >> > >>>>>>>>>>>>>>>>>>> but
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> on
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> windows too.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> And I will describe it very
> > thoroughly.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> When I was C++ developer (more than
> 10
> > >> > years
> > >> > >> > >>> ago), I
> > >> > >> > >>>>>>>>>>> have
> > >> > >> > >>>>>>>>>>>>>>>>> not
> > >> > >> > >>>>>>>>>>>>>>>>>>> any
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> trouble
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> at all with CMake and Visual Studio
> > >> 2005.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Everything works and works good.
> > >> Moreover,
> > >> > >> you
> > >> > >> > can
> > >> > >> > >>>>>>>>>> build
> > >> > >> > >>>>>>>>>>>>>>>>> with
> > >> > >> > >>>>>>>>>>>>>>>>>>>> NMake,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> msbuild and generate solutions for
> > >> > >> development.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> I suppose, for CI purposes, using
> > NMake
> > >> is
> > >> > a
> > >> > >> way
> > >> > >> > >>>>>>>>>> better,
> > >> > >> > >>>>>>>>>>>>>>>>> than
> > >> > >> > >>>>>>>>>>>>>>>>>>> use
> > >> > >> > >>>>>>>>>>>>>>>>>>>> vs
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> solutions.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:42, Nikolay
> > >> > Izhikov <
> > >> > >> > >>>>>>>>>>>>>>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, Igor.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Nikolay, removing support for a
> > >> certain
> > >> > >> build
> > >> > >> > >>>>>>>>>> system
> > >> > >> > >>>>>>>>>>> is
> > >> > >> > >>>>>>>>>>>> a
> > >> > >> > >>>>>>>>>>>>>>>>>>>> breaking
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> change.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> No, it’s not.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Why do you think so?
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Development environment and build
> > >> system
> > >> > is
> > >> > >> a
> > >> > >> > >>>>>>>>>> subject
> > >> > >> > >>>>>>>>>>> to
> > >> > >> > >>>>>>>>>>>>>>>>> change
> > >> > >> > >>>>>>>>>>>>>>>>>>>> in
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> any
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> project.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> We can drop or add support of any
> > build
> > >> > >> system
> > >> > >> > >>> any
> > >> > >> > >>>>>>>>>> time
> > >> > >> > >>>>>>>>>>>> we
> > >> > >> > >>>>>>>>>>>>>>>>>>> want.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 26 мая 2020 г., в 16:35, Ilya
> > >> Kasnacheev
> > >> > <
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> написал(а):
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't see why we can't get rid
> of
> > >> > >> autotools
> > >> > >> > >>> in a
> > >> > >> > >>>>>>>>>>> minor
> > >> > >> > >>>>>>>>>>>>>>>>>>>> release,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> provided
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> that cmake actually works.
> Removing
> > >> > native
> > >> > >> VS
> > >> > >> > >>>>>>>>>> support
> > >> > >> > >>>>>>>>>>>> may
> > >> > >> > >>>>>>>>>>>>>>>>> be a
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> different
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> thing.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Build system and precise set of
> > >> > >> dependencies
> > >> > >> > is
> > >> > >> > >>>>>>>>>> not a
> > >> > >> > >>>>>>>>>>>>>>>>> part of
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> public
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> API
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> in
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> my opinion.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:02, Igor
> > >> Sapego <
> > >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great!
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Let's start with creating a TC
> > suite
> > >> for
> > >> > >> it.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The only concern I have is that
> it
> > is
> > >> > one
> > >> > >> > more
> > >> > >> > >>>>>>>>>> build
> > >> > >> > >>>>>>>>>>>>>>>>> system
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support. Should we get rid of
> > >> > >> autotools in
> > >> > >> > >>> 3.0?
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Igor
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 2:44 PM
> > >> Alexey
> > >> > >> > >>> Kukushkin <
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [hidden email] >
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1. I recently completed a
> > cross-IDE
> > >> > (MS
> > >> > >> > >>> Visual
> > >> > >> > >>>>>>>>>>>> Studio &
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> GCC/GDB)
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Ignite
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C++ project and CMake in Ignite
> > C++
> > >> > would
> > >> > >> > save
> > >> > >> > >>>>>>>>>> me a
> > >> > >> > >>>>>>>>>>>> day
> > >> > >> > >>>>>>>>>>>>>>>>> of
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> effort.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 12:09,
> Pavel
> > >> > >> Tupitsyn <
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 12:02
> PM
> > >> > Zhenya
> > >> > >> > >>>>>>>>>> Stanilovsky
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < [hidden email] >
> > >> wrote:
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ivan huge +1 with your
> proposal.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I had some problems with odbc
> > >> tests
> > >> > >> > building
> > >> > >> > >>>>>>>>>> too,
> > >> > >> > >>>>>>>>>>>>>>>>> looks
> > >> > >> > >>>>>>>>>>>>>>>>>>> like
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> cmake
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> will
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make it more easy.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Igniters.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d like to discuss porting
> > build
> > >> > >> process
> > >> > >> > >>> of
> > >> > >> > >>>>>>>>>>>>>>>>> Ignite.C++.
> > >> > >> > >>>>>>>>>>>>>>>>>>> I
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> think
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there is time to change it.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Motivation*
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, it is hard to
> build
> > >> > >> > Ignite.C++.
> > >> > >> > >>>>>>>>>>>> Different
> > >> > >> > >>>>>>>>>>>>>>>>>>> build
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> process
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> windows and linux, lack of
> > >> building
> > >> > >> > support
> > >> > >> > >>> on
> > >> > >> > >>>>>>>>>> Mac
> > >> > >> > >>>>>>>>>>>> OS
> > >> > >> > >>>>>>>>>>>>>>>>> X
> > >> > >> > >>>>>>>>>>>>>>>>>>>> (quite
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> popular
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> among developers), absolutely
> > not
> > >> IDE
> > >> > >> > >>> support,
> > >> > >> > >>>>>>>>>>>> except
> > >> > >> > >>>>>>>>>>>>>>>>>>>> windows
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> and
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> only
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio is supported.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Suggestion*
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d suggest to migrate to
> CMake
> > >> > build
> > >> > >> > >>> system.
> > >> > >> > >>>>>>>>>> It
> > >> > >> > >>>>>>>>>>> is
> > >> > >> > >>>>>>>>>>>>>>>>> very
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> popular
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> among
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> open source projects, and in
> > >> Apache
> > >> > >> > Software
> > >> > >> > >>>>>>>>>>>>>>>>> Foundation
> > >> > >> > >>>>>>>>>>>>>>>>>>> too.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Notable
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user:
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache Mesos, Apache Zookeeper
> > (C
> > >> > >> client
> > >> > >> > >>> offers
> > >> > >> > >>>>>>>>>>>> CMake
> > >> > >> > >>>>>>>>>>>>>>>>> as
> > >> > >> > >>>>>>>>>>>>>>>>>>> an
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> alternative
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> autoconf and only option on
> > >> windows),
> > >> > >> > Apache
> > >> > >> > >>>>>>>>>> Kafka
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> (librdkafka -
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> C/C++
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> client), Apache Thrift.
> Popular
> > >> > >> > >>> column-oriented
> > >> > >> > >>>>>>>>>>>>>>>>> database
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> ClickHouse
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uses CMake.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMake is widely supported in
> > many
> > >> > >> IDE’s
> > >> > >> > on
> > >> > >> > >>>>>>>>>>> various
> > >> > >> > >>>>>>>>>>>>>>>>>>>> platforms,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> notably
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio, CLion, Xcode,
> > >> > QtCreator,
> > >> > >> > >>>>>>>>>> KDevelop.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Current status*
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, the most of work
> is
> > >> done
> > >> > >> (see
> > >> > >> > >>> [1])
> > >> > >> > >>>>>>>>>> and
> > >> > >> > >>>>>>>>>>>>>>>>> tested
> > >> > >> > >>>>>>>>>>>>>>>>>>> on
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> Mac
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> OS X
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.15 (some C++ porting). All
> > >> tests
> > >> > are
> > >> > >> > run
> > >> > >> > >>>>>>>>>>> without
> > >> > >> > >>>>>>>>>>>>>>>>> any
> > >> > >> > >>>>>>>>>>>>>>>>>>>> flaws,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> odbc (unixodbc), ssl, thin and
> > >> thick
> > >> > >> > client,
> > >> > >> > >>>>>>>>>>>>>>>>> installation,
> > >> > >> > >>>>>>>>>>>>>>>>>>>> IDE
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> integration
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (CLion). Next steps is to test
> > >> linux
> > >> > >> and
> > >> > >> > >>>>>>>>>> windows.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But full migration isn’t
> > possible
> > >> > >> without
> > >> > >> > >>>>>>>>>>> agreement
> > >> > >> > >>>>>>>>>>>>>>>>> and
> > >> > >> > >>>>>>>>>>>>>>>>>>>> help
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> of
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> community. Even if most of all
> > you
> > >> > >> agree,
> > >> > >> > >>>>>>>>>>> migration
> > >> > >> > >>>>>>>>>>>>>>>>>>> requires
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> additional
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> efforts in TC agents tuning
> and
> > >> so on
> > >> > >> > (event
> > >> > >> > >>>>>>>>>>> though
> > >> > >> > >>>>>>>>>>>>>>>>> test
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> running
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> fully
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> automated by CMake CTest).
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lets discuss my proposition
> and
> > >> > idea.
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] -
> > >> > >> > >>>>>>>>>>> https://github.com/apache/ignite/pull/7845
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>
> > >> > >> > >>>>>>>>>>>
> > >> > >> > >>>>>>>>>>> --
> > >> > >> > >>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > >> > >> > >>>>>>>>>>>
> > >> > >> > >>>>>>>>>>
> > >> > >> > >>>>>>>>>
> > >> > >> > >>>>>>>>>
> > >> > >> > >>>>>>>>> --
> > >> > >> > >>>>>>>>> Sincerely yours, Ivan Daschinskiy
>

[Pavel Tupitsyn]

I think we could add a script or two, like cmake-build.sh and ctest.sh,
which work right away and can be used as a reference.

This is useful for Igniters like me who need to check some C++ related
things quickly,
but do that rarely enough to forget the build system quirks.

On Wed, Jul 1, 2020 at 10:53 AM Ivan Daschinsky <[hidden email]> wrote:

> No, I am really curious if this instruction complete or not. Actually, Ilya
> Kasnacheev asked me about the same thing as you. And may be instruction is
> not so obvious and should be reworked. You know, that developers are not
> usually great in writing documentation.
>
> ср, 1 июл. 2020 г., 10:37 Pavel Tupitsyn <[hidden email]>:
>
> > Ivan,
> >
> > Thank you for such a detailed explanation!
> > I am sorry if I upset you.
> >
> > I just wanted to make sure that instructions are correct,
> > and I simply missed those 2 dots. Now it all works perfectly.
> >
> > Pavel
> >
> > On Wed, Jul 1, 2020 at 8:09 AM Ivan Daschinsky <[hidden email]>
> > wrote:
> >
> > > Let me explain with details.
> > >
> > > CMake is unusual from other build systems, that it can separate build
> > root
> > > and source root. Moreover, it is strongly discouraged to mix them.
> > > Benefits:
> > > 1. You can have many build with different options using same source.
> > > 2. You can build project with different toolchain using same source.
> > > 3. You can build project for different platforms using same source
> > > (cross-compilation, docker, etc.)
> > >
> > > Common patter is:
> > > 1. Create build root.
> > > 2. Change current dir to build root.
> > > 3. Invoke cmake in build root, pointing to source root.
> > >
> > > Usually build root is subdirectory, of source root. So, as it mentioned
> > in
> > > DEVNOTES.txt, usual steps are:
> > > 1. mdkir <build_root> (usually named
> > cmake-build-<build-type>[-<toolchain>]
> > > 2. cd <build_root>
> > > 3. cmake [-DOPTION1=VALUE1 -DOPTION2=VALUE2 ... ] .. (NB! This double
> > dots
> > > are important, they points to source root)
> > >
> > > This is so common, that you can hardly find any tutorial about CMake in
> > > google without thes double dots. This is basic of CMake.
> > >
> > > So if you think that we should explain for C++ developers basics of the
> > > most common build system (CMake is really very popular and nowadays
> > usually
> > > must for new projects),
> > > we can add this to DEVNOTES.txt. But I think that is not necessary at
> > all.
> > > For example, we don't explain basics of maven, though it is not obvious
> > at
> > > all as it seems to us, Ignite developers.
> > >
> > > ср, 1 июл. 2020 г. в 06:18, Ivan Daschinsky <[hidden email]>:
> > >
> > > > Pavel, pay attention to two dots at the end. All build files should
> > stay
> > > > at current dir, and cmake-build-release is supposed to be a build
> root.
> > > And
> > > > this directory is added to gitignore. Actually, build directory can
> be
> > > > everywhere, but you should pass path to dir, that contains root
> > > > CMakeLists.txt. Usually it is parent directory of
> cmake-build-release,
> > so
> > > > double dot is used. It is so common pattern of usage and I simply
> > cannot
> > > > understand why it is misleading.
> > > >
> > > > ср, 1 июл. 2020 г., 0:48 Pavel Tupitsyn <[hidden email]>:
> > > >
> > > >> This is awesome, thanks everyone!
> > > >>
> > > >> I've tried following the instructions, and the following two steps
> > seem
> > > to
> > > >> be misleading:
> > > >> * mkdir cmake-build-[release|debug]
> > > >> * cd ./cmake-build-[release|debug]
> > > >>
> > > >> When I run cmake in the newly created cmake-build-debug dir, I get:
> > > >> CMake Error: The source directory
> > > >> "/home/pavel/w/ignite/modules/platforms/cpp/cmake-build-release"
> does
> > > not
> > > >> appear to contain CMakeLists.txt.
> > > >>
> > > >> If I skip those 2 steps, I can build Ignite C++ and run tests with
> > ctest
> > > >> on
> > > >> Ubuntu 20.04.
> > > >>
> > > >>
> > > >> Another observation: building the project produces untracked git
> > files.
> > > >> Should we update gitignore accordingly?
> > > >>
> > > >>
> > > >> Thanks,
> > > >> Pavel
> > > >>
> > > >>
> > > >> On Tue, Jun 30, 2020 at 9:33 PM Ivan Daschinsky <
> [hidden email]>
> > > >> wrote:
> > > >>
> > > >> > Ok, CMake now is the only option to build C++ on non-windows
> > > platforms.
> > > >> > Autotools is removed from master.
> > > >> >
> > > >> > Many thanks to Igor Sapego, Zhenya Stanilovsky, Nickolay Izhikov
> and
> > > >> Ilya
> > > >> > Kasnacheev for review, testing and suggestions.
> > > >> >
> > > >> > вт, 23 июн. 2020 г. в 18:42, Ivan Daschinsky <[hidden email]
> >:
> > > >> >
> > > >> > > I suppose, that removal of autotools from source code is a
> > question
> > > >> of a
> > > >> > > week. There is no need to support it.
> > > >> > >
> > > >> > > вт, 23 июн. 2020 г., 18:38 Ilya Kasnacheev <
> > > [hidden email]
> > > >> >:
> > > >> > >
> > > >> > >> Hello!
> > > >> > >>
> > > >> > >> Once you do that, I think it would make sense to remove
> autotools
> > > >> > >> invocation from artifact build process. In the future we may
> > choose
> > > >> to
> > > >> > >> remove autotools support entirely.
> > > >> > >>
> > > >> > >> Regards,
> > > >> > >> --
> > > >> > >> Ilya Kasnacheev
> > > >> > >>
> > > >> > >>
> > > >> > >> вт, 23 июн. 2020 г. в 18:00, Petr Ivanov <[hidden email]
> >:
> > > >> > >>
> > > >> > >> > That host was down for some time and got up only recently.
> > > >> > >> > Installed cmake there also.
> > > >> > >> >
> > > >> > >> >
> > > >> > >> >
> > > >> > >> > > On 23 Jun 2020, at 17:39, Ivan Daschinsky <
> > [hidden email]
> > > >
> > > >> > >> wrote:
> > > >> > >> > >
> > > >> > >> > > Petr, I see, that cmake is missing on aitc10_05 but it is
> in
> > > pool
> > > >> > and
> > > >> > >> > > trying to run build.
> > > >> > >> > >
> > > >> > >> > > [1] --
> > > >> > >> > >
> > > >> > >> >
> > > >> > >>
> > > >> >
> > > >>
> > >
> >
> https://ci.ignite.apache.org/buildConfiguration/IgniteTests24Java8_PlatformCPPCMakeLinux/5412025
> > > >> > >> > >
> > > >> > >> > > вт, 23 июн. 2020 г. в 17:33, Ivan Daschinsky <
> > > >> [hidden email]>:
> > > >> > >> > >
> > > >> > >> > >>>> For the sake of discretion, I'd purpose to remove old
> > suites
> > > >> from
> > > >> > >> Run
> > > >> > >> > >> All and archive or pause them for some time before
> removal.
> > > >> > >> > >> Agree, I was talking about removal from RunAll chain,
> > complete
> > > >> > >> removal
> > > >> > >> > is
> > > >> > >> > >> not necessary.
> > > >> > >> > >> But after private discussion with Igor Sapego, me and he
> > > >> decided to
> > > >> > >> wait
> > > >> > >> > >> for a week before exclusion of these suites from RunAll.
> > > >> > >> > >>
> > > >> > >> > >> вт, 23 июн. 2020 г. в 17:21, Petr Ivanov <
> > [hidden email]
> > > >:
> > > >> > >> > >>
> > > >> > >> > >>> For the sake of discretion, I'd purpose to remove old
> > suites
> > > >> from
> > > >> > >> Run
> > > >> > >> > All
> > > >> > >> > >>> and archive or pause them for some time before removal.
> > > >> > >> > >>>
> > > >> > >> > >>>
> > > >> > >> > >>>> On 23 Jun 2020, at 13:26, Nikolay Izhikov <
> > > >> [hidden email]>
> > > >> > >> > wrote:
> > > >> > >> > >>>>
> > > >> > >> > >>>>> So, folks, is it ok to remove old suites from build
> chain
> > > >> > >> > >>>>
> > > >> > >> > >>>> +1 from me.
> > > >> > >> > >>>>
> > > >> > >> > >>>>
> > > >> > >> > >>>>> 23 июня 2020 г., в 13:15, Ivan Daschinsky <
> > > >> [hidden email]>
> > > >> > >> > >>> написал(а):
> > > >> > >> > >>>>>
> > > >> > >> > >>>>> Well, new suites added to RunAll and all seems to be
> ok.
> > > >> > >> > >>>>>
> > > >> > >> > >>>>> I think it is time to remove old suites.
> > > >> > >> > >>>>> WDYT?
> > > >> > >> > >>>>>
> > > >> > >> > >>>>> Also, I created patch with removal of autotools, but
> old
> > > >> suites
> > > >> > >> > should
> > > >> > >> > >>> be
> > > >> > >> > >>>>> removed first.
> > > >> > >> > >>>>>
> > > >> > >> > >>>>> So, folks, is it ok to remove old suites from build
> > chain?
> > > >> > >> > >>>>>
> > > >> > >> > >>>>> вт, 23 июн. 2020 г. в 10:36, Ivan Daschinsky <
> > > >> > [hidden email]
> > > >> > >> >:
> > > >> > >> > >>>>>
> > > >> > >> > >>>>>> Ok, I changed agents requirements to builds and add
> them
> > > to
> > > >> > >> runAll
> > > >> > >> > >>>>>>
> > > >> > >> > >>>>>> пн, 22 июн. 2020 г. в 22:39, Petr Ivanov <
> > > >> [hidden email]
> > > >> > >:
> > > >> > >> > >>>>>>
> > > >> > >> > >>>>>>> Cmake is installed on all agents (except 10 which is
> > > >> currently
> > > >> > >> down
> > > >> > >> > >>> and
> > > >> > >> > >>>>>>> will be updated later).
> > > >> > >> > >>>>>>>
> > > >> > >> > >>>>>>>
> > > >> > >> > >>>>>>>> On 22 Jun 2020, at 21:03, Ivan Daschinsky <
> > > >> > [hidden email]
> > > >> > >> >
> > > >> > >> > >>> wrote:
> > > >> > >> > >>>>>>>>
> > > >> > >> > >>>>>>>> Well, patch is merged. Thank a lot to Igor Sapego
> for
> > > >> review.
> > > >> > >> > >>>>>>>>
> > > >> > >> > >>>>>>>> Peter, well, cmake now can be installed on all
> agent.
> > > >> > >> > >>>>>>>>
> > > >> > >> > >>>>>>>> I think it's time to add cmake suites to runAll and
> > > >> exclude
> > > >> > old
> > > >> > >> > >>> suites
> > > >> > >> > >>>>>>> from
> > > >> > >> > >>>>>>>> it.
> > > >> > >> > >>>>>>>>
> > > >> > >> > >>>>>>>> Patch with removing autotools I Will submit in few
> > days.
> > > >> > >> > >>>>>>>>
> > > >> > >> > >>>>>>>> пн, 22 июн. 2020 г., 20:25 Ivan Daschinsky <
> > > >> > >> [hidden email]>:
> > > >> > >> > >>>>>>>>
> > > >> > >> > >>>>>>>>> Hi folks!
> > > >> > >> > >>>>>>>>>
> > > >> > >> > >>>>>>>>> Good news -- I successfully created 2 CMake suites
> > [1]
> > > >> [2]
> > > >> > and
> > > >> > >> > they
> > > >> > >> > >>>>>>> works
> > > >> > >> > >>>>>>>>> as a charm.
> > > >> > >> > >>>>>>>>> Many thanks to Ilya Kasnacheev for giving me
> > > permissions
> > > >> and
> > > >> > >> to
> > > >> > >> > >>> Peter
> > > >> > >> > >>>>>>>>> Ivanov for installing cmake and giving a whole
> agent
> > > for
> > > >> > >> testing.
> > > >> > >> > >>>>>>>>>
> > > >> > >> > >>>>>>>>> [1] --
> > > >> > >> > >>>>>>>>>
> > > >> > >> > >>>>>>>
> > > >> > >> > >>>
> > > >> > >> >
> > > >> > >>
> > > >> >
> > > >>
> > >
> >
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinuxClang&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> > > >> > >> > >>>>>>>>> [2] --
> > > >> > >> > >>>>>>>>>
> > > >> > >> > >>>>>>>
> > > >> > >> > >>>
> > > >> > >> >
> > > >> > >>
> > > >> >
> > > >>
> > >
> >
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinux&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> > > >> > >> > >>>>>>>>>
> > > >> > >> > >>>>>>>>> пн, 22 июн. 2020 г. в 12:03, Ilya Kasnacheev <
> > > >> > >> > >>>>>>> [hidden email]>:
> > > >> > >> > >>>>>>>>>
> > > >> > >> > >>>>>>>>>> Hello!
> > > >> > >> > >>>>>>>>>>
> > > >> > >> > >>>>>>>>>> I think you should contact Peter Ivanov if you
> want
> > > >> > anything
> > > >> > >> to
> > > >> > >> > be
> > > >> > >> > >>>>>>>>>> installed on agents.
> > > >> > >> > >>>>>>>>>>
> > > >> > >> > >>>>>>>>>> Regards,
> > > >> > >> > >>>>>>>>>> --
> > > >> > >> > >>>>>>>>>> Ilya Kasnacheev
> > > >> > >> > >>>>>>>>>>
> > > >> > >> > >>>>>>>>>>
> > > >> > >> > >>>>>>>>>> пн, 22 июн. 2020 г. в 12:00, Ivan Daschinsky <
> > > >> > >> > [hidden email]
> > > >> > >> > >>>> :
> > > >> > >> > >>>>>>>>>>
> > > >> > >> > >>>>>>>>>>> Actually, I'm going to create 2 new suites based
> on
> > > >> > existing
> > > >> > >> > >>> ones:
> > > >> > >> > >>>>>>>>>>> 1. Platform C++ CMake (Linux)
> > > >> > >> > >>>>>>>>>>> 2. Platform C++ CMake (Linux Clang)
> > > >> > >> > >>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>> Ilya, thank you very much. But, despite the fact,
> > > that
> > > >> I
> > > >> > >> have
> > > >> > >> > >>>>>>>>>> permissions,
> > > >> > >> > >>>>>>>>>>> it seems that it's impossible to install
> something
> > > >> > (namely,
> > > >> > >> > >>> CMake) on
> > > >> > >> > >>>>>>>>>>> agents.
> > > >> > >> > >>>>>>>>>>> How can I do this obviously essential task?
> > > >> > >> > >>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>> пн, 22 июн. 2020 г. в 11:30, Ilya Kasnacheev <
> > > >> > >> > >>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>> Hello!
> > > >> > >> > >>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>> I have assigned roles on TC, you can now work on
> > > these
> > > >> > >> builds.
> > > >> > >> > >>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>> Please describe your changes on development list
> > so
> > > >> that
> > > >> > >> > people
> > > >> > >> > >>>>>>>>>>> understand
> > > >> > >> > >>>>>>>>>>>> what is going on.
> > > >> > >> > >>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>> Regards,
> > > >> > >> > >>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >> > >>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>> вс, 21 июн. 2020 г. в 17:35, Ivan Daschinsky <
> > > >> > >> > >>> [hidden email]>:
> > > >> > >> > >>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>> Hi folks.
> > > >> > >> > >>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>> Patch is rigorously tested and with Igor Sapego
> > > help
> > > >> it
> > > >> > is
> > > >> > >> > >>> possible
> > > >> > >> > >>>>>>>>>> to
> > > >> > >> > >>>>>>>>>>>>> build with cmake Ignite.C++  even on windows.
> > > >> > >> > >>>>>>>>>>>>> But, it's required to make some TC suites and
> > tune
> > > >> them,
> > > >> > >> in
> > > >> > >> > >>> order
> > > >> > >> > >>>>>>> to
> > > >> > >> > >>>>>>>>>>>> patch
> > > >> > >> > >>>>>>>>>>>>> be merged.
> > > >> > >> > >>>>>>>>>>>>> Unfortunately, I am not a commiter and I
> doesn't
> > > have
> > > >> > >> rights
> > > >> > >> > to
> > > >> > >> > >>>>>>>>>> create
> > > >> > >> > >>>>>>>>>>>>> suites. Also, AFAIK, Igor currently is quite
> busy
> > > and
> > > >> > >> doesn't
> > > >> > >> > >>> have
> > > >> > >> > >>>>>>>>>> much
> > > >> > >> > >>>>>>>>>>>>> time to do this task by himself.
> > > >> > >> > >>>>>>>>>>>>> So I need some help from community. Is it
> > possible
> > > to
> > > >> > >> grant
> > > >> > >> > me
> > > >> > >> > >>> some
> > > >> > >> > >>>>>>>>>>>> rights
> > > >> > >> > >>>>>>>>>>>>> to TC agents?
> > > >> > >> > >>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>> ср, 3 июн. 2020 г. в 18:03, Nikolay Izhikov <
> > > >> > >> > >>> [hidden email]>:
> > > >> > >> > >>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>> Hello.
> > > >> > >> > >>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>> I will do review of this changes.
> > > >> > >> > >>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>> 1 июня 2020 г., в 13:21, Ivan Daschinsky <
> > > >> > >> > >>> [hidden email]>
> > > >> > >> > >>>>>>>>>>>>>> написал(а):
> > > >> > >> > >>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>> Igor, could you please check my PR?
> > > >> > >> > >>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:28, Ivan Daschinsky <
> > > >> > >> > >>>>>>>>>> [hidden email]>:
> > > >> > >> > >>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>> Thanks you all. Run patch (I've changed some
> > > code
> > > >> > >> also) on
> > > >> > >> > >>> TC
> > > >> > >> > >>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>> all
> > > >> > >> > >>>>>>>>>>>>> CPP
> > > >> > >> > >>>>>>>>>>>>>>>> suites are green (GCC, CLang, Win64)
> > > >> > >> > >>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:02, Zhenya
> Stanilovsky
> > > >> > >> > >>>>>>>>>>>>>> <[hidden email]
> > > >> > >> > >>>>>>>>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>> Ivan besides documentation [1]
> > > >> > >> > >>>>>>>>>>>>>>>>> -s no —  no works
> > > >> > >> > >>>>>>>>>>>>>>>>> -- catch_system_errors =no — works properly
> > > well,
> > > >> > >> tests
> > > >> > >> > are
> > > >> > >> > >>>>>>>>>>> passed.
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>> boost 1.65
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>> [1]
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>
> > > >> > >> > >>>>>>>
> > > >> > >> > >>>
> > > >> > >> >
> > > >> > >>
> > > >> >
> > > >>
> > >
> >
> https://www.boost.org/doc/libs/1_65_0/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/catch_system.html
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>> Hello!
> > > >> > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>> I didn't check tests since I don't develop
> > AI
> > > >> C++,
> > > >> > >> > merely
> > > >> > >> > >>>>>>>>>> use it
> > > >> > >> > >>>>>>>>>>>> as
> > > >> > >> > >>>>>>>>>>>>>> user.
> > > >> > >> > >>>>>>>>>>>>>>>>>> That's where we should wait for Igor
> Sapego
> > to
> > > >> > check.
> > > >> > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>> Regards,
> > > >> > >> > >>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 12:20, Ivan
> Daschinsky
> > <
> > > >> > >> > >>>>>>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>> Ilya, thanks a lot! What about tests? I
> > found
> > > >> one
> > > >> > >> flag
> > > >> > >> > >>> that
> > > >> > >> > >>>>>>>>>>> must
> > > >> > >> > >>>>>>>>>>>> be
> > > >> > >> > >>>>>>>>>>>>>>>>>>> supplied to boost.tests.
> > > >> > >> > >>>>>>>>>>>>>>>>>>> This flag should fix JVM crash of C++
> > suites
> > > on
> > > >> > >> Linux.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>> Zhenya Stanilovsky and me have checked,
> > that
> > > >> > without
> > > >> > >> > this
> > > >> > >> > >>>>>>>>>> flag
> > > >> > >> > >>>>>>>>>>>>> tests
> > > >> > >> > >>>>>>>>>>>>>>>>> failed
> > > >> > >> > >>>>>>>>>>>>>>>>>>> with SIGSEGV early (boost catch this
> signal
> > > >> from
> > > >> > >> jvm,
> > > >> > >> > but
> > > >> > >> > >>>>>>>>>> it is
> > > >> > >> > >>>>>>>>>>>> ok
> > > >> > >> > >>>>>>>>>>>>>> for
> > > >> > >> > >>>>>>>>>>>>>>>>>>> jvm).
> > > >> > >> > >>>>>>>>>>>>>>>>>>> Flag is -catch_system_errors=no. I added
> it
> > > to
> > > >> > CTest
> > > >> > >> > >>> runner.
> > > >> > >> > >>>>>>>>>>> You
> > > >> > >> > >>>>>>>>>>>>> can
> > > >> > >> > >>>>>>>>>>>>>>>>>>> invoke it manually and using make test
> > > >> ARGS="-V"
> > > >> > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 11:54, Ilya
> > Kasnacheev <
> > > >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> > > >> > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> Hello!
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> Looks good to me! But we probably also
> ask
> > > >> Igor
> > > >> > to
> > > >> > >> > take
> > > >> > >> > >>> a
> > > >> > >> > >>>>>>>>>>> look.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> Compiled debug and release, without and
> > with
> > > >> > odbc,
> > > >> > >> > >>> checked
> > > >> > >> > >>>>>>>>>>>> running
> > > >> > >> > >>>>>>>>>>>>>>>>> thick
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> node and ODBC connection on Linux.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> Regards,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> чт, 28 мая 2020 г. в 17:31, Ivan
> > Daschinsky
> > > <
> > > >> > >> > >>>>>>>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> Ok, PR is ready
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >> https://issues.apache.org/jira/browse/IGNITE-13078
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> Build tested on Mac OS X 10.15 and
> Ubuntu
> > > >> 20.04
> > > >> > >> with
> > > >> > >> > >>> CMake
> > > >> > >> > >>>>>>>>>>>> 3.17.2
> > > >> > >> > >>>>>>>>>>>>>>>>> and
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> 3.6.1
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> Unfortunately, I was not able to test
> on
> > > >> > Windows,
> > > >> > >> but
> > > >> > >> > >>>>>>>>>>>> principally
> > > >> > >> > >>>>>>>>>>>>>>>>> it
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> should
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> works, but minor issues are probable.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> Instruction is attached in PR.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> Any use reports are welcomed!
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:51, Ivan
> > > Daschinsky <
> > > >> > >> > >>>>>>>>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>> Stephen, looks great! I do mostly the
> > same
> > > >> > >> things in
> > > >> > >> > >>> C++
> > > >> > >> > >>>>>>>>>>> code.
> > > >> > >> > >>>>>>>>>>>>>>>>> Thank
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> you!
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:33, Stephen
> > > >> Darlington
> > > >> > <
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>> [hidden email] >:
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Not sure if it’ll help, but I made
> some
> > > >> > changes
> > > >> > >> to
> > > >> > >> > >>> get
> > > >> > >> > >>>>>>>>>> it
> > > >> > >> > >>>>>>>>>>>>>>>>> working
> > > >> > >> > >>>>>>>>>>>>>>>>>>> on a
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Mac with the current built system.
> > There
> > > >> may
> > > >> > be
> > > >> > >> > some
> > > >> > >> > >>>>>>>>>> code
> > > >> > >> > >>>>>>>>>>>> worth
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> taking.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > https://github.com/apache/ignite/pull/4872
> > > >> <
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > https://github.com/apache/ignite/pull/4872
> > > >> >
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Regards,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> Stephen
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> On 26 May 2020, at 16:02, Ivan
> > > Daschinsky
> > > >> <
> > > >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> wrote:
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I appreciate any help, thank you,
> > Ilya.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Currently I have a small PR without
> > > ticket
> > > >> > >> (link
> > > >> > >> > in
> > > >> > >> > >>>>>>>>>> first
> > > >> > >> > >>>>>>>>>>>>>>>>>>> post),but
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> I
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> decided not to file a jira issue
> > before
> > > >> > >> > discussion.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Now I see, that this feature are of
> > > great
> > > >> > >> interest
> > > >> > >> > >>> to
> > > >> > >> > >>>>>>>>>>>>>>>>> community.
> > > >> > >> > >>>>>>>>>>>>>>>>>>> So
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> I
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> file
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> a ticket, test myself on my home
> > laptop
> > > >> > (ubuntu
> > > >> > >> > >>> 20.04)
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> and add detailed instructions to
> > > >> DEVNOTES.txt
> > > >> > >> in a
> > > >> > >> > >>> few
> > > >> > >> > >>>>>>>>>>> days.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I would be happy if my someone can
> > > follow
> > > >> the
> > > >> > >> > >>>>>>>>>> instruction
> > > >> > >> > >>>>>>>>>>>> and
> > > >> > >> > >>>>>>>>>>>>>>>>>>> write
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> possible issues.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> I will notify about status update in
> > > this
> > > >> > >> thread
> > > >> > >> > in
> > > >> > >> > >>>>>>>>>> next
> > > >> > >> > >>>>>>>>>>> few
> > > >> > >> > >>>>>>>>>>>>>>>>> days.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Thank you all very much for support!
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 17:50, Ilya
> > > >> Kasnacheev <
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> I will assist with checking on
> Linux
> > if
> > > >> you
> > > >> > >> would
> > > >> > >> > >>>>>>>>>>>> contribute
> > > >> > >> > >>>>>>>>>>>>>>>>> a
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> patch.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Please start with a ticket (or even
> > an
> > > >> IEP
> > > >> > >> > maybe?)
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:47, Ivan
> > > >> Daschinsky
> > > >> > <
> > > >> > >> > >>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Guys, I will certainly thoroughly
> > test
> > > >> my
> > > >> > fix
> > > >> > >> > not
> > > >> > >> > >>>>>>>>>> only
> > > >> > >> > >>>>>>>>>>>>>>>>> unices,
> > > >> > >> > >>>>>>>>>>>>>>>>>>> but
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> on
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> windows too.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> And I will describe it very
> > > thoroughly.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> When I was C++ developer (more
> than
> > 10
> > > >> > years
> > > >> > >> > >>> ago), I
> > > >> > >> > >>>>>>>>>>> have
> > > >> > >> > >>>>>>>>>>>>>>>>> not
> > > >> > >> > >>>>>>>>>>>>>>>>>>> any
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> trouble
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> at all with CMake and Visual
> Studio
> > > >> 2005.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Everything works and works good.
> > > >> Moreover,
> > > >> > >> you
> > > >> > >> > can
> > > >> > >> > >>>>>>>>>> build
> > > >> > >> > >>>>>>>>>>>>>>>>> with
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> NMake,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> msbuild and generate solutions for
> > > >> > >> development.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> I suppose, for CI purposes, using
> > > NMake
> > > >> is
> > > >> > a
> > > >> > >> way
> > > >> > >> > >>>>>>>>>> better,
> > > >> > >> > >>>>>>>>>>>>>>>>> than
> > > >> > >> > >>>>>>>>>>>>>>>>>>> use
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> vs
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> solutions.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:42,
> Nikolay
> > > >> > Izhikov <
> > > >> > >> > >>>>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, Igor.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Nikolay, removing support for a
> > > >> certain
> > > >> > >> build
> > > >> > >> > >>>>>>>>>> system
> > > >> > >> > >>>>>>>>>>> is
> > > >> > >> > >>>>>>>>>>>> a
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> breaking
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> change.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> No, it’s not.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Why do you think so?
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Development environment and build
> > > >> system
> > > >> > is
> > > >> > >> a
> > > >> > >> > >>>>>>>>>> subject
> > > >> > >> > >>>>>>>>>>> to
> > > >> > >> > >>>>>>>>>>>>>>>>> change
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> in
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> any
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> project.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> We can drop or add support of any
> > > build
> > > >> > >> system
> > > >> > >> > >>> any
> > > >> > >> > >>>>>>>>>> time
> > > >> > >> > >>>>>>>>>>>> we
> > > >> > >> > >>>>>>>>>>>>>>>>>>> want.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 26 мая 2020 г., в 16:35, Ilya
> > > >> Kasnacheev
> > > >> > <
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> написал(а):
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't see why we can't get rid
> > of
> > > >> > >> autotools
> > > >> > >> > >>> in a
> > > >> > >> > >>>>>>>>>>> minor
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> release,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> provided
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> that cmake actually works.
> > Removing
> > > >> > native
> > > >> > >> VS
> > > >> > >> > >>>>>>>>>> support
> > > >> > >> > >>>>>>>>>>>> may
> > > >> > >> > >>>>>>>>>>>>>>>>> be a
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> different
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> thing.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Build system and precise set of
> > > >> > >> dependencies
> > > >> > >> > is
> > > >> > >> > >>>>>>>>>> not a
> > > >> > >> > >>>>>>>>>>>>>>>>> part of
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> public
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> API
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> in
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> my opinion.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:02, Igor
> > > >> Sapego <
> > > >> > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great!
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Let's start with creating a TC
> > > suite
> > > >> for
> > > >> > >> it.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The only concern I have is that
> > it
> > > is
> > > >> > one
> > > >> > >> > more
> > > >> > >> > >>>>>>>>>> build
> > > >> > >> > >>>>>>>>>>>>>>>>> system
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support. Should we get rid
> of
> > > >> > >> autotools in
> > > >> > >> > >>> 3.0?
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Igor
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 2:44 PM
> > > >> Alexey
> > > >> > >> > >>> Kukushkin <
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [hidden email] >
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1. I recently completed a
> > > cross-IDE
> > > >> > (MS
> > > >> > >> > >>> Visual
> > > >> > >> > >>>>>>>>>>>> Studio &
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> GCC/GDB)
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Ignite
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C++ project and CMake in
> Ignite
> > > C++
> > > >> > would
> > > >> > >> > save
> > > >> > >> > >>>>>>>>>> me a
> > > >> > >> > >>>>>>>>>>>> day
> > > >> > >> > >>>>>>>>>>>>>>>>> of
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> effort.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 12:09,
> > Pavel
> > > >> > >> Tupitsyn <
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 12:02
> > PM
> > > >> > Zhenya
> > > >> > >> > >>>>>>>>>> Stanilovsky
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < [hidden email]
> >
> > > >> wrote:
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ivan huge +1 with your
> > proposal.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I had some problems with
> odbc
> > > >> tests
> > > >> > >> > building
> > > >> > >> > >>>>>>>>>> too,
> > > >> > >> > >>>>>>>>>>>>>>>>> looks
> > > >> > >> > >>>>>>>>>>>>>>>>>>> like
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> cmake
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> will
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make it more easy.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Igniters.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d like to discuss porting
> > > build
> > > >> > >> process
> > > >> > >> > >>> of
> > > >> > >> > >>>>>>>>>>>>>>>>> Ignite.C++.
> > > >> > >> > >>>>>>>>>>>>>>>>>>> I
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> think
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there is time to change it.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Motivation*
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, it is hard to
> > build
> > > >> > >> > Ignite.C++.
> > > >> > >> > >>>>>>>>>>>> Different
> > > >> > >> > >>>>>>>>>>>>>>>>>>> build
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> process
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> windows and linux, lack of
> > > >> building
> > > >> > >> > support
> > > >> > >> > >>> on
> > > >> > >> > >>>>>>>>>> Mac
> > > >> > >> > >>>>>>>>>>>> OS
> > > >> > >> > >>>>>>>>>>>>>>>>> X
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> (quite
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> popular
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> among developers),
> absolutely
> > > not
> > > >> IDE
> > > >> > >> > >>> support,
> > > >> > >> > >>>>>>>>>>>> except
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> windows
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> and
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> only
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio is supported.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Suggestion*
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d suggest to migrate to
> > CMake
> > > >> > build
> > > >> > >> > >>> system.
> > > >> > >> > >>>>>>>>>> It
> > > >> > >> > >>>>>>>>>>> is
> > > >> > >> > >>>>>>>>>>>>>>>>> very
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>> popular
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> among
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> open source projects, and in
> > > >> Apache
> > > >> > >> > Software
> > > >> > >> > >>>>>>>>>>>>>>>>> Foundation
> > > >> > >> > >>>>>>>>>>>>>>>>>>> too.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Notable
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user:
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache Mesos, Apache
> Zookeeper
> > > (C
> > > >> > >> client
> > > >> > >> > >>> offers
> > > >> > >> > >>>>>>>>>>>> CMake
> > > >> > >> > >>>>>>>>>>>>>>>>> as
> > > >> > >> > >>>>>>>>>>>>>>>>>>> an
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> alternative
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> autoconf and only option on
> > > >> windows),
> > > >> > >> > Apache
> > > >> > >> > >>>>>>>>>> Kafka
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> (librdkafka -
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> C/C++
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> client), Apache Thrift.
> > Popular
> > > >> > >> > >>> column-oriented
> > > >> > >> > >>>>>>>>>>>>>>>>> database
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>> ClickHouse
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uses CMake.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMake is widely supported
> in
> > > many
> > > >> > >> IDE’s
> > > >> > >> > on
> > > >> > >> > >>>>>>>>>>> various
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> platforms,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> notably
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio, CLion, Xcode,
> > > >> > QtCreator,
> > > >> > >> > >>>>>>>>>> KDevelop.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Current status*
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, the most of work
> > is
> > > >> done
> > > >> > >> (see
> > > >> > >> > >>> [1])
> > > >> > >> > >>>>>>>>>> and
> > > >> > >> > >>>>>>>>>>>>>>>>> tested
> > > >> > >> > >>>>>>>>>>>>>>>>>>> on
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> Mac
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> OS X
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.15 (some C++ porting).
> All
> > > >> tests
> > > >> > are
> > > >> > >> > run
> > > >> > >> > >>>>>>>>>>> without
> > > >> > >> > >>>>>>>>>>>>>>>>> any
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> flaws,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> odbc (unixodbc), ssl, thin
> and
> > > >> thick
> > > >> > >> > client,
> > > >> > >> > >>>>>>>>>>>>>>>>> installation,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> IDE
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> integration
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (CLion). Next steps is to
> test
> > > >> linux
> > > >> > >> and
> > > >> > >> > >>>>>>>>>> windows.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But full migration isn’t
> > > possible
> > > >> > >> without
> > > >> > >> > >>>>>>>>>>> agreement
> > > >> > >> > >>>>>>>>>>>>>>>>> and
> > > >> > >> > >>>>>>>>>>>>>>>>>>>> help
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> of
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> community. Even if most of
> all
> > > you
> > > >> > >> agree,
> > > >> > >> > >>>>>>>>>>> migration
> > > >> > >> > >>>>>>>>>>>>>>>>>>> requires
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> additional
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> efforts in TC agents tuning
> > and
> > > >> so on
> > > >> > >> > (event
> > > >> > >> > >>>>>>>>>>> though
> > > >> > >> > >>>>>>>>>>>>>>>>> test
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> running
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> fully
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> automated by CMake CTest).
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lets discuss my proposition
> > and
> > > >> > idea.
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] -
> > > >> > >> > >>>>>>>>>>> https://github.com/apache/ignite/pull/7845
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>> --
> > > >> > >> > >>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >> > >>>>>>>>>>>
> > > >> > >> > >>>>>>>>>>
> > > >> > >> > >>>>>>>>>
> > > >> > >> > >>>>>>>>>
> > > >> > >> > >>>>>>>>> --
> > > >> > >> > >>>>>>>>> Sincerely yours, Ivan Daschinskiy
> >
>

[Ilya Kasnacheev]

Hello!

Ivan, you really really need to move these two dots as a first argument in
your example, instead of a last one, or people will going to hit this issue
every time they try CMake.

Regards,
--
Ilya Kasnacheev


ср, 1 июл. 2020 г. в 06:18, Ivan Daschinsky <[hidden email]>:

> Pavel, pay attention to two dots at the end. All build files should stay at
> current dir, and cmake-build-release is supposed to be a build root. And
> this directory is added to gitignore. Actually, build directory can be
> everywhere, but you should pass path to dir, that contains root
> CMakeLists.txt. Usually it is parent directory of cmake-build-release, so
> double dot is used. It is so common pattern of usage and I simply cannot
> understand why it is misleading.
>
> ср, 1 июл. 2020 г., 0:48 Pavel Tupitsyn <[hidden email]>:
>
> > This is awesome, thanks everyone!
> >
> > I've tried following the instructions, and the following two steps seem
> to
> > be misleading:
> > * mkdir cmake-build-[release|debug]
> > * cd ./cmake-build-[release|debug]
> >
> > When I run cmake in the newly created cmake-build-debug dir, I get:
> > CMake Error: The source directory
> > "/home/pavel/w/ignite/modules/platforms/cpp/cmake-build-release" does not
> > appear to contain CMakeLists.txt.
> >
> > If I skip those 2 steps, I can build Ignite C++ and run tests with ctest
> on
> > Ubuntu 20.04.
> >
> >
> > Another observation: building the project produces untracked git files.
> > Should we update gitignore accordingly?
> >
> >
> > Thanks,
> > Pavel
> >
> >
> > On Tue, Jun 30, 2020 at 9:33 PM Ivan Daschinsky <[hidden email]>
> > wrote:
> >
> > > Ok, CMake now is the only option to build C++ on non-windows platforms.
> > > Autotools is removed from master.
> > >
> > > Many thanks to Igor Sapego, Zhenya Stanilovsky, Nickolay Izhikov and
> Ilya
> > > Kasnacheev for review, testing and suggestions.
> > >
> > > вт, 23 июн. 2020 г. в 18:42, Ivan Daschinsky <[hidden email]>:
> > >
> > > > I suppose, that removal of autotools from source code is a question
> of
> > a
> > > > week. There is no need to support it.
> > > >
> > > > вт, 23 июн. 2020 г., 18:38 Ilya Kasnacheev <
> [hidden email]
> > >:
> > > >
> > > >> Hello!
> > > >>
> > > >> Once you do that, I think it would make sense to remove autotools
> > > >> invocation from artifact build process. In the future we may choose
> to
> > > >> remove autotools support entirely.
> > > >>
> > > >> Regards,
> > > >> --
> > > >> Ilya Kasnacheev
> > > >>
> > > >>
> > > >> вт, 23 июн. 2020 г. в 18:00, Petr Ivanov <[hidden email]>:
> > > >>
> > > >> > That host was down for some time and got up only recently.
> > > >> > Installed cmake there also.
> > > >> >
> > > >> >
> > > >> >
> > > >> > > On 23 Jun 2020, at 17:39, Ivan Daschinsky <[hidden email]>
> > > >> wrote:
> > > >> > >
> > > >> > > Petr, I see, that cmake is missing on aitc10_05 but it is in
> pool
> > > and
> > > >> > > trying to run build.
> > > >> > >
> > > >> > > [1] --
> > > >> > >
> > > >> >
> > > >>
> > >
> >
> https://ci.ignite.apache.org/buildConfiguration/IgniteTests24Java8_PlatformCPPCMakeLinux/5412025
> > > >> > >
> > > >> > > вт, 23 июн. 2020 г. в 17:33, Ivan Daschinsky <
> [hidden email]
> > >:
> > > >> > >
> > > >> > >>>> For the sake of discretion, I'd purpose to remove old suites
> > from
> > > >> Run
> > > >> > >> All and archive or pause them for some time before removal.
> > > >> > >> Agree, I was talking about removal from RunAll chain, complete
> > > >> removal
> > > >> > is
> > > >> > >> not necessary.
> > > >> > >> But after private discussion with Igor Sapego, me and he
> decided
> > to
> > > >> wait
> > > >> > >> for a week before exclusion of these suites from RunAll.
> > > >> > >>
> > > >> > >> вт, 23 июн. 2020 г. в 17:21, Petr Ivanov <[hidden email]
> >:
> > > >> > >>
> > > >> > >>> For the sake of discretion, I'd purpose to remove old suites
> > from
> > > >> Run
> > > >> > All
> > > >> > >>> and archive or pause them for some time before removal.
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>> On 23 Jun 2020, at 13:26, Nikolay Izhikov <
> [hidden email]
> > >
> > > >> > wrote:
> > > >> > >>>>
> > > >> > >>>>> So, folks, is it ok to remove old suites from build chain
> > > >> > >>>>
> > > >> > >>>> +1 from me.
> > > >> > >>>>
> > > >> > >>>>
> > > >> > >>>>> 23 июня 2020 г., в 13:15, Ivan Daschinsky <
> > [hidden email]>
> > > >> > >>> написал(а):
> > > >> > >>>>>
> > > >> > >>>>> Well, new suites added to RunAll and all seems to be ok.
> > > >> > >>>>>
> > > >> > >>>>> I think it is time to remove old suites.
> > > >> > >>>>> WDYT?
> > > >> > >>>>>
> > > >> > >>>>> Also, I created patch with removal of autotools, but old
> > suites
> > > >> > should
> > > >> > >>> be
> > > >> > >>>>> removed first.
> > > >> > >>>>>
> > > >> > >>>>> So, folks, is it ok to remove old suites from build chain?
> > > >> > >>>>>
> > > >> > >>>>> вт, 23 июн. 2020 г. в 10:36, Ivan Daschinsky <
> > > [hidden email]
> > > >> >:
> > > >> > >>>>>
> > > >> > >>>>>> Ok, I changed agents requirements to builds and add them to
> > > >> runAll
> > > >> > >>>>>>
> > > >> > >>>>>> пн, 22 июн. 2020 г. в 22:39, Petr Ivanov <
> > [hidden email]
> > > >:
> > > >> > >>>>>>
> > > >> > >>>>>>> Cmake is installed on all agents (except 10 which is
> > currently
> > > >> down
> > > >> > >>> and
> > > >> > >>>>>>> will be updated later).
> > > >> > >>>>>>>
> > > >> > >>>>>>>
> > > >> > >>>>>>>> On 22 Jun 2020, at 21:03, Ivan Daschinsky <
> > > [hidden email]
> > > >> >
> > > >> > >>> wrote:
> > > >> > >>>>>>>>
> > > >> > >>>>>>>> Well, patch is merged. Thank a lot to Igor Sapego for
> > review.
> > > >> > >>>>>>>>
> > > >> > >>>>>>>> Peter, well, cmake now can be installed on all agent.
> > > >> > >>>>>>>>
> > > >> > >>>>>>>> I think it's time to add cmake suites to runAll and
> exclude
> > > old
> > > >> > >>> suites
> > > >> > >>>>>>> from
> > > >> > >>>>>>>> it.
> > > >> > >>>>>>>>
> > > >> > >>>>>>>> Patch with removing autotools I Will submit in few days.
> > > >> > >>>>>>>>
> > > >> > >>>>>>>> пн, 22 июн. 2020 г., 20:25 Ivan Daschinsky <
> > > >> [hidden email]>:
> > > >> > >>>>>>>>
> > > >> > >>>>>>>>> Hi folks!
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>>> Good news -- I successfully created 2 CMake suites [1]
> [2]
> > > and
> > > >> > they
> > > >> > >>>>>>> works
> > > >> > >>>>>>>>> as a charm.
> > > >> > >>>>>>>>> Many thanks to Ilya Kasnacheev for giving me permissions
> > and
> > > >> to
> > > >> > >>> Peter
> > > >> > >>>>>>>>> Ivanov for installing cmake and giving a whole agent for
> > > >> testing.
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>>> [1] --
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>
> > > >> > >>>
> > > >> >
> > > >>
> > >
> >
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinuxClang&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> > > >> > >>>>>>>>> [2] --
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>
> > > >> > >>>
> > > >> >
> > > >>
> > >
> >
> https://ci.ignite.apache.org/viewType.html?buildTypeId=IgniteTests24Java8_PlatformCPPCMakeLinux&branch_IgniteTests24Java8=pull%2F7854%2Fhead&tab=buildTypeStatusDiv
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>>> пн, 22 июн. 2020 г. в 12:03, Ilya Kasnacheev <
> > > >> > >>>>>>> [hidden email]>:
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>>>> Hello!
> > > >> > >>>>>>>>>>
> > > >> > >>>>>>>>>> I think you should contact Peter Ivanov if you want
> > > anything
> > > >> to
> > > >> > be
> > > >> > >>>>>>>>>> installed on agents.
> > > >> > >>>>>>>>>>
> > > >> > >>>>>>>>>> Regards,
> > > >> > >>>>>>>>>> --
> > > >> > >>>>>>>>>> Ilya Kasnacheev
> > > >> > >>>>>>>>>>
> > > >> > >>>>>>>>>>
> > > >> > >>>>>>>>>> пн, 22 июн. 2020 г. в 12:00, Ivan Daschinsky <
> > > >> > [hidden email]
> > > >> > >>>> :
> > > >> > >>>>>>>>>>
> > > >> > >>>>>>>>>>> Actually, I'm going to create 2 new suites based on
> > > existing
> > > >> > >>> ones:
> > > >> > >>>>>>>>>>> 1. Platform C++ CMake (Linux)
> > > >> > >>>>>>>>>>> 2. Platform C++ CMake (Linux Clang)
> > > >> > >>>>>>>>>>>
> > > >> > >>>>>>>>>>> Ilya, thank you very much. But, despite the fact,
> that I
> > > >> have
> > > >> > >>>>>>>>>> permissions,
> > > >> > >>>>>>>>>>> it seems that it's impossible to install something
> > > (namely,
> > > >> > >>> CMake) on
> > > >> > >>>>>>>>>>> agents.
> > > >> > >>>>>>>>>>> How can I do this obviously essential task?
> > > >> > >>>>>>>>>>>
> > > >> > >>>>>>>>>>> пн, 22 июн. 2020 г. в 11:30, Ilya Kasnacheev <
> > > >> > >>>>>>> [hidden email]
> > > >> > >>>>>>>>>>> :
> > > >> > >>>>>>>>>>>
> > > >> > >>>>>>>>>>>> Hello!
> > > >> > >>>>>>>>>>>>
> > > >> > >>>>>>>>>>>> I have assigned roles on TC, you can now work on
> these
> > > >> builds.
> > > >> > >>>>>>>>>>>>
> > > >> > >>>>>>>>>>>> Please describe your changes on development list so
> > that
> > > >> > people
> > > >> > >>>>>>>>>>> understand
> > > >> > >>>>>>>>>>>> what is going on.
> > > >> > >>>>>>>>>>>>
> > > >> > >>>>>>>>>>>> Regards,
> > > >> > >>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>
> > > >> > >>>>>>>>>>>> вс, 21 июн. 2020 г. в 17:35, Ivan Daschinsky <
> > > >> > >>> [hidden email]>:
> > > >> > >>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>> Hi folks.
> > > >> > >>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>> Patch is rigorously tested and with Igor Sapego help
> > it
> > > is
> > > >> > >>> possible
> > > >> > >>>>>>>>>> to
> > > >> > >>>>>>>>>>>>> build with cmake Ignite.C++  even on windows.
> > > >> > >>>>>>>>>>>>> But, it's required to make some TC suites and tune
> > them,
> > > >> in
> > > >> > >>> order
> > > >> > >>>>>>> to
> > > >> > >>>>>>>>>>>> patch
> > > >> > >>>>>>>>>>>>> be merged.
> > > >> > >>>>>>>>>>>>> Unfortunately, I am not a commiter and I doesn't
> have
> > > >> rights
> > > >> > to
> > > >> > >>>>>>>>>> create
> > > >> > >>>>>>>>>>>>> suites. Also, AFAIK, Igor currently is quite busy
> and
> > > >> doesn't
> > > >> > >>> have
> > > >> > >>>>>>>>>> much
> > > >> > >>>>>>>>>>>>> time to do this task by himself.
> > > >> > >>>>>>>>>>>>> So I need some help from community. Is it possible
> to
> > > >> grant
> > > >> > me
> > > >> > >>> some
> > > >> > >>>>>>>>>>>> rights
> > > >> > >>>>>>>>>>>>> to TC agents?
> > > >> > >>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>> ср, 3 июн. 2020 г. в 18:03, Nikolay Izhikov <
> > > >> > >>> [hidden email]>:
> > > >> > >>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>> Hello.
> > > >> > >>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>> I will do review of this changes.
> > > >> > >>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>> 1 июня 2020 г., в 13:21, Ivan Daschinsky <
> > > >> > >>> [hidden email]>
> > > >> > >>>>>>>>>>>>>> написал(а):
> > > >> > >>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>> Igor, could you please check my PR?
> > > >> > >>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:28, Ivan Daschinsky <
> > > >> > >>>>>>>>>> [hidden email]>:
> > > >> > >>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>> Thanks you all. Run patch (I've changed some code
> > > >> also) on
> > > >> > >>> TC
> > > >> > >>>>>>>>>> --
> > > >> > >>>>>>>>>>> all
> > > >> > >>>>>>>>>>>>> CPP
> > > >> > >>>>>>>>>>>>>>>> suites are green (GCC, CLang, Win64)
> > > >> > >>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 15:02, Zhenya Stanilovsky
> > > >> > >>>>>>>>>>>>>> <[hidden email]
> > > >> > >>>>>>>>>>>>>>>>> :
> > > >> > >>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>> Ivan besides documentation [1]
> > > >> > >>>>>>>>>>>>>>>>> -s no —  no works
> > > >> > >>>>>>>>>>>>>>>>> -- catch_system_errors =no — works properly
> well,
> > > >> tests
> > > >> > are
> > > >> > >>>>>>>>>>> passed.
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>> boost 1.65
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>> [1]
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>
> > > >> > >>>>>>>>>>>
> > > >> > >>>>>>>>>>
> > > >> > >>>>>>>
> > > >> > >>>
> > > >> >
> > > >>
> > >
> >
> https://www.boost.org/doc/libs/1_65_0/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/catch_system.html
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>> Hello!
> > > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>> I didn't check tests since I don't develop AI
> > C++,
> > > >> > merely
> > > >> > >>>>>>>>>> use it
> > > >> > >>>>>>>>>>>> as
> > > >> > >>>>>>>>>>>>>> user.
> > > >> > >>>>>>>>>>>>>>>>>> That's where we should wait for Igor Sapego to
> > > check.
> > > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>> Regards,
> > > >> > >>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 12:20, Ivan Daschinsky <
> > > >> > >>>>>>>>>>> [hidden email]
> > > >> > >>>>>>>>>>>>>> :
> > > >> > >>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>> Ilya, thanks a lot! What about tests? I found
> > one
> > > >> flag
> > > >> > >>> that
> > > >> > >>>>>>>>>>> must
> > > >> > >>>>>>>>>>>> be
> > > >> > >>>>>>>>>>>>>>>>>>> supplied to boost.tests.
> > > >> > >>>>>>>>>>>>>>>>>>> This flag should fix JVM crash of C++ suites
> on
> > > >> Linux.
> > > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>> Zhenya Stanilovsky and me have checked, that
> > > without
> > > >> > this
> > > >> > >>>>>>>>>> flag
> > > >> > >>>>>>>>>>>>> tests
> > > >> > >>>>>>>>>>>>>>>>> failed
> > > >> > >>>>>>>>>>>>>>>>>>> with SIGSEGV early (boost catch this signal
> from
> > > >> jvm,
> > > >> > but
> > > >> > >>>>>>>>>> it is
> > > >> > >>>>>>>>>>>> ok
> > > >> > >>>>>>>>>>>>>> for
> > > >> > >>>>>>>>>>>>>>>>>>> jvm).
> > > >> > >>>>>>>>>>>>>>>>>>> Flag is -catch_system_errors=no. I added it to
> > > CTest
> > > >> > >>> runner.
> > > >> > >>>>>>>>>>> You
> > > >> > >>>>>>>>>>>>> can
> > > >> > >>>>>>>>>>>>>>>>>>> invoke it manually and using make test
> ARGS="-V"
> > > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>> пт, 29 мая 2020 г. в 11:54, Ilya Kasnacheev <
> > > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> > > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>> Hello!
> > > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>> Looks good to me! But we probably also ask
> Igor
> > > to
> > > >> > take
> > > >> > >>> a
> > > >> > >>>>>>>>>>> look.
> > > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>> Compiled debug and release, without and with
> > > odbc,
> > > >> > >>> checked
> > > >> > >>>>>>>>>>>> running
> > > >> > >>>>>>>>>>>>>>>>> thick
> > > >> > >>>>>>>>>>>>>>>>>>>> node and ODBC connection on Linux.
> > > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>> Regards,
> > > >> > >>>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>> чт, 28 мая 2020 г. в 17:31, Ivan Daschinsky <
> > > >> > >>>>>>>>>>>> [hidden email]
> > > >> > >>>>>>>>>>>>>>> :
> > > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>> Ok, PR is ready
> > > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> https://issues.apache.org/jira/browse/IGNITE-13078
> > > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>> Build tested on Mac OS X 10.15 and Ubuntu
> > 20.04
> > > >> with
> > > >> > >>> CMake
> > > >> > >>>>>>>>>>>> 3.17.2
> > > >> > >>>>>>>>>>>>>>>>> and
> > > >> > >>>>>>>>>>>>>>>>>>>> 3.6.1
> > > >> > >>>>>>>>>>>>>>>>>>>>> Unfortunately, I was not able to test on
> > > Windows,
> > > >> but
> > > >> > >>>>>>>>>>>> principally
> > > >> > >>>>>>>>>>>>>>>>> it
> > > >> > >>>>>>>>>>>>>>>>>>>> should
> > > >> > >>>>>>>>>>>>>>>>>>>>> works, but minor issues are probable.
> > > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>> Instruction is attached in PR.
> > > >> > >>>>>>>>>>>>>>>>>>>>> Any use reports are welcomed!
> > > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:51, Ivan Daschinsky
> <
> > > >> > >>>>>>>>>>>>> [hidden email]
> > > >> > >>>>>>>>>>>>>>>>>> :
> > > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>> Stephen, looks great! I do mostly the same
> > > >> things in
> > > >> > >>> C++
> > > >> > >>>>>>>>>>> code.
> > > >> > >>>>>>>>>>>>>>>>> Thank
> > > >> > >>>>>>>>>>>>>>>>>>>> you!
> > > >> > >>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 18:33, Stephen
> > Darlington
> > > <
> > > >> > >>>>>>>>>>>>>>>>>>>>>> [hidden email] >:
> > > >> > >>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> Not sure if it’ll help, but I made some
> > > changes
> > > >> to
> > > >> > >>> get
> > > >> > >>>>>>>>>> it
> > > >> > >>>>>>>>>>>>>>>>> working
> > > >> > >>>>>>>>>>>>>>>>>>> on a
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> Mac with the current built system. There
> may
> > > be
> > > >> > some
> > > >> > >>>>>>>>>> code
> > > >> > >>>>>>>>>>>> worth
> > > >> > >>>>>>>>>>>>>>>>>>>> taking.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>
> https://github.com/apache/ignite/pull/4872
> > <
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>
> https://github.com/apache/ignite/pull/4872
> > >
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> Regards,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> Stephen
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> On 26 May 2020, at 16:02, Ivan
> Daschinsky <
> > > >> > >>>>>>>>>>>>>>>>> [hidden email] >
> > > >> > >>>>>>>>>>>>>>>>>>>>> wrote:
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> I appreciate any help, thank you, Ilya.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> Currently I have a small PR without
> ticket
> > > >> (link
> > > >> > in
> > > >> > >>>>>>>>>> first
> > > >> > >>>>>>>>>>>>>>>>>>> post),but
> > > >> > >>>>>>>>>>>>>>>>>>>> I
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> decided not to file a jira issue before
> > > >> > discussion.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> Now I see, that this feature are of great
> > > >> interest
> > > >> > >>> to
> > > >> > >>>>>>>>>>>>>>>>> community.
> > > >> > >>>>>>>>>>>>>>>>>>> So
> > > >> > >>>>>>>>>>>>>>>>>>>> I
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> file
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> a ticket, test myself on my home laptop
> > > (ubuntu
> > > >> > >>> 20.04)
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> and add detailed instructions to
> > DEVNOTES.txt
> > > >> in a
> > > >> > >>> few
> > > >> > >>>>>>>>>>> days.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> I would be happy if my someone can follow
> > the
> > > >> > >>>>>>>>>> instruction
> > > >> > >>>>>>>>>>>> and
> > > >> > >>>>>>>>>>>>>>>>>>> write
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> possible issues.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> I will notify about status update in this
> > > >> thread
> > > >> > in
> > > >> > >>>>>>>>>> next
> > > >> > >>>>>>>>>>> few
> > > >> > >>>>>>>>>>>>>>>>> days.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> Thank you all very much for support!
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 17:50, Ilya
> > Kasnacheev <
> > > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> I will assist with checking on Linux if
> > you
> > > >> would
> > > >> > >>>>>>>>>>>> contribute
> > > >> > >>>>>>>>>>>>>>>>> a
> > > >> > >>>>>>>>>>>>>>>>>>>> patch.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Please start with a ticket (or even an
> IEP
> > > >> > maybe?)
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:47, Ivan
> > Daschinsky
> > > <
> > > >> > >>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >>>>>>>>>>>>>>>>>>>> :
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Guys, I will certainly thoroughly test
> my
> > > fix
> > > >> > not
> > > >> > >>>>>>>>>> only
> > > >> > >>>>>>>>>>>>>>>>> unices,
> > > >> > >>>>>>>>>>>>>>>>>>> but
> > > >> > >>>>>>>>>>>>>>>>>>>>> on
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> windows too.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> And I will describe it very thoroughly.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> When I was C++ developer (more than 10
> > > years
> > > >> > >>> ago), I
> > > >> > >>>>>>>>>>> have
> > > >> > >>>>>>>>>>>>>>>>> not
> > > >> > >>>>>>>>>>>>>>>>>>> any
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> trouble
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> at all with CMake and Visual Studio
> 2005.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Everything works and works good.
> > Moreover,
> > > >> you
> > > >> > can
> > > >> > >>>>>>>>>> build
> > > >> > >>>>>>>>>>>>>>>>> with
> > > >> > >>>>>>>>>>>>>>>>>>>> NMake,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> msbuild and generate solutions for
> > > >> development.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> I suppose, for CI purposes, using NMake
> > is
> > > a
> > > >> way
> > > >> > >>>>>>>>>> better,
> > > >> > >>>>>>>>>>>>>>>>> than
> > > >> > >>>>>>>>>>>>>>>>>>> use
> > > >> > >>>>>>>>>>>>>>>>>>>> vs
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> solutions.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:42, Nikolay
> > > Izhikov <
> > > >> > >>>>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >>>>>>>>>>>>>>>>>>>>> :
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, Igor.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Nikolay, removing support for a
> certain
> > > >> build
> > > >> > >>>>>>>>>> system
> > > >> > >>>>>>>>>>> is
> > > >> > >>>>>>>>>>>> a
> > > >> > >>>>>>>>>>>>>>>>>>>> breaking
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> change.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> No, it’s not.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Why do you think so?
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Development environment and build
> system
> > > is
> > > >> a
> > > >> > >>>>>>>>>> subject
> > > >> > >>>>>>>>>>> to
> > > >> > >>>>>>>>>>>>>>>>> change
> > > >> > >>>>>>>>>>>>>>>>>>>> in
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> any
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> project.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> We can drop or add support of any
> build
> > > >> system
> > > >> > >>> any
> > > >> > >>>>>>>>>> time
> > > >> > >>>>>>>>>>>> we
> > > >> > >>>>>>>>>>>>>>>>>>> want.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> 26 мая 2020 г., в 16:35, Ilya
> > Kasnacheev
> > > <
> > > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> написал(а):
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello!
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> I don't see why we can't get rid of
> > > >> autotools
> > > >> > >>> in a
> > > >> > >>>>>>>>>>> minor
> > > >> > >>>>>>>>>>>>>>>>>>>> release,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> provided
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> that cmake actually works. Removing
> > > native
> > > >> VS
> > > >> > >>>>>>>>>> support
> > > >> > >>>>>>>>>>>> may
> > > >> > >>>>>>>>>>>>>>>>> be a
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> different
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> thing.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Build system and precise set of
> > > >> dependencies
> > > >> > is
> > > >> > >>>>>>>>>> not a
> > > >> > >>>>>>>>>>>>>>>>> part of
> > > >> > >>>>>>>>>>>>>>>>>>>>> public
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> API
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> in
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> my opinion.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ilya Kasnacheev
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 16:02, Igor
> > Sapego <
> > > >> > >>>>>>>>>>>>>>>>> [hidden email] >:
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great!
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Let's start with creating a TC suite
> > for
> > > >> it.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The only concern I have is that it
> is
> > > one
> > > >> > more
> > > >> > >>>>>>>>>> build
> > > >> > >>>>>>>>>>>>>>>>> system
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support. Should we get rid of
> > > >> autotools in
> > > >> > >>> 3.0?
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Igor
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 2:44 PM
> Alexey
> > > >> > >>> Kukushkin <
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [hidden email] >
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1. I recently completed a
> cross-IDE
> > > (MS
> > > >> > >>> Visual
> > > >> > >>>>>>>>>>>> Studio &
> > > >> > >>>>>>>>>>>>>>>>>>>>> GCC/GDB)
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>> Ignite
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> C++ project and CMake in Ignite C++
> > > would
> > > >> > save
> > > >> > >>>>>>>>>> me a
> > > >> > >>>>>>>>>>>> day
> > > >> > >>>>>>>>>>>>>>>>> of
> > > >> > >>>>>>>>>>>>>>>>>>>>> effort.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> вт, 26 мая 2020 г. в 12:09, Pavel
> > > >> Tupitsyn <
> > > >> > >>>>>>>>>>>>>>>>>>>>> [hidden email]
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> :
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +1
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, May 26, 2020 at 12:02 PM
> > > Zhenya
> > > >> > >>>>>>>>>> Stanilovsky
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < [hidden email] >
> > wrote:
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ivan huge +1 with your proposal.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I had some problems with odbc
> tests
> > > >> > building
> > > >> > >>>>>>>>>> too,
> > > >> > >>>>>>>>>>>>>>>>> looks
> > > >> > >>>>>>>>>>>>>>>>>>> like
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> cmake
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> will
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make it more easy.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Igniters.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d like to discuss porting
> build
> > > >> process
> > > >> > >>> of
> > > >> > >>>>>>>>>>>>>>>>> Ignite.C++.
> > > >> > >>>>>>>>>>>>>>>>>>> I
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> think
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there is time to change it.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Motivation*
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, it is hard to build
> > > >> > Ignite.C++.
> > > >> > >>>>>>>>>>>> Different
> > > >> > >>>>>>>>>>>>>>>>>>> build
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> process
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> for
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> windows and linux, lack of
> building
> > > >> > support
> > > >> > >>> on
> > > >> > >>>>>>>>>> Mac
> > > >> > >>>>>>>>>>>> OS
> > > >> > >>>>>>>>>>>>>>>>> X
> > > >> > >>>>>>>>>>>>>>>>>>>> (quite
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> popular
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> among developers), absolutely not
> > IDE
> > > >> > >>> support,
> > > >> > >>>>>>>>>>>> except
> > > >> > >>>>>>>>>>>>>>>>>>>> windows
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> and
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> only
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio is supported.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Suggestion*
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I’d suggest to migrate to CMake
> > > build
> > > >> > >>> system.
> > > >> > >>>>>>>>>> It
> > > >> > >>>>>>>>>>> is
> > > >> > >>>>>>>>>>>>>>>>> very
> > > >> > >>>>>>>>>>>>>>>>>>>>>>> popular
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> among
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> open source projects, and in
> Apache
> > > >> > Software
> > > >> > >>>>>>>>>>>>>>>>> Foundation
> > > >> > >>>>>>>>>>>>>>>>>>> too.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Notable
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> user:
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache Mesos, Apache Zookeeper (C
> > > >> client
> > > >> > >>> offers
> > > >> > >>>>>>>>>>>> CMake
> > > >> > >>>>>>>>>>>>>>>>> as
> > > >> > >>>>>>>>>>>>>>>>>>> an
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> alternative
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> autoconf and only option on
> > windows),
> > > >> > Apache
> > > >> > >>>>>>>>>> Kafka
> > > >> > >>>>>>>>>>>>>>>>>>>>> (librdkafka -
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> C/C++
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> client), Apache Thrift. Popular
> > > >> > >>> column-oriented
> > > >> > >>>>>>>>>>>>>>>>> database
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>> ClickHouse
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> uses CMake.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMake is widely supported in
> many
> > > >> IDE’s
> > > >> > on
> > > >> > >>>>>>>>>>> various
> > > >> > >>>>>>>>>>>>>>>>>>>> platforms,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> notably
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visual Studio, CLion, Xcode,
> > > QtCreator,
> > > >> > >>>>>>>>>> KDevelop.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Current status*
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently, the most of work is
> > done
> > > >> (see
> > > >> > >>> [1])
> > > >> > >>>>>>>>>> and
> > > >> > >>>>>>>>>>>>>>>>> tested
> > > >> > >>>>>>>>>>>>>>>>>>> on
> > > >> > >>>>>>>>>>>>>>>>>>>>> Mac
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> OS X
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.15 (some C++ porting). All
> tests
> > > are
> > > >> > run
> > > >> > >>>>>>>>>>> without
> > > >> > >>>>>>>>>>>>>>>>> any
> > > >> > >>>>>>>>>>>>>>>>>>>> flaws,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> odbc (unixodbc), ssl, thin and
> > thick
> > > >> > client,
> > > >> > >>>>>>>>>>>>>>>>> installation,
> > > >> > >>>>>>>>>>>>>>>>>>>> IDE
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> integration
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (CLion). Next steps is to test
> > linux
> > > >> and
> > > >> > >>>>>>>>>> windows.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But full migration isn’t
> possible
> > > >> without
> > > >> > >>>>>>>>>>> agreement
> > > >> > >>>>>>>>>>>>>>>>> and
> > > >> > >>>>>>>>>>>>>>>>>>>> help
> > > >> > >>>>>>>>>>>>>>>>>>>>> of
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> community. Even if most of all
> you
> > > >> agree,
> > > >> > >>>>>>>>>>> migration
> > > >> > >>>>>>>>>>>>>>>>>>> requires
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> additional
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> efforts in TC agents tuning and
> so
> > on
> > > >> > (event
> > > >> > >>>>>>>>>>> though
> > > >> > >>>>>>>>>>>>>>>>> test
> > > >> > >>>>>>>>>>>>>>>>>>>>> running
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>> fully
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> automated by CMake CTest).
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lets discuss my proposition and
> > > idea.
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] -
> > > >> > >>>>>>>>>>> https://github.com/apache/ignite/pull/7845
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>> --
> > > >> > >>>>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>>>
> > > >> > >>>>>>>>>>>>
> > > >> > >>>>>>>>>>>
> > > >> > >>>>>>>>>>>
> > > >> > >>>>>>>>>>> --
> > > >> > >>>>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>>>
> > > >> > >>>>>>>>>>
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>>> --
> > > >> > >>>>>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>>>>
> > > >> > >>>>>>>
> > > >> > >>>>>>>
> > > >> > >>>>>>
> > > >> > >>>>>> --
> > > >> > >>>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>>>
> > > >> > >>>>>
> > > >> > >>>>>
> > > >> > >>>>> --
> > > >> > >>>>> Sincerely yours, Ivan Daschinskiy
> > > >> > >>>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>
> > > >> > >> --
> > > >> > >> Sincerely yours, Ivan Daschinskiy
> > > >> > >>
> > > >> > >
> > > >> > >
> > > >> > > --
> > > >> > > Sincerely yours, Ivan Daschinskiy
> > > >> >
> > > >> >
> > > >>
> > > >
> > >
> > > --
> > > Sincerely yours, Ivan Daschinskiy
> > >
> >
>